lkml.org 
[lkml]   [2017]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH 1/3] ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM
    Date
    Am Montag, 3. April 2017, 12:23:03 CEST schrieb Wadim Egorov:
    > The phyCORE-RK3288 is a SoM (System on Module) containing a RK3288 SoC.
    > The module can be connected to different carrier boards.
    > It can be also equipped with different RAM, SPI flash and eMMC variants.
    > The Rapid Development Kit option is using the following setup:
    >
    > - 1 GB DDR3 RAM (2 Banks)
    > - 1x 4 KB EEPROM
    > - DP83867 Gigabit Ethernet PHY
    > - 16 MB SPI Flash
    > - 4 GB eMMC Flash
    >
    > Signed-off-by: Wadim Egorov <w.egorov@phytec.de>

    applied for 4.12 with the following minor changes:

    - moved phy-handle property up a bit
    - switches compatible and #address+#size-cells in mdio0
    - dropped rockchip,grf from &io_domains (grf is a simple-mfd and can
    get the grf syscon on its own via its parent)
    - vdd_cpu: regulator@60 (from fan53555@60)
    - serial_flash: flash@0 (from m25p80@0)
    Nodes should be named after their "category" not the actual device

    Thanks
    Heiko

    \
     
     \ /
      Last update: 2017-04-06 10:31    [W:3.492 / U:0.000 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site