lkml.org 
[lkml]   [2017]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 13/38] Annotate hardware config module parameters in drivers/media/
From
Date
When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image. Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify. The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/media/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Mauro Carvalho Chehab <mchehab@kernel.org>
cc: mjpeg-users@lists.sourceforge.net
cc: linux-media@vger.kernel.org
---

drivers/media/pci/zoran/zoran_card.c | 2 +-
drivers/media/rc/serial_ir.c | 10 +++++-----
2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/pci/zoran/zoran_card.c b/drivers/media/pci/zoran/zoran_card.c
index 5266755add63..4680f001653a 100644
--- a/drivers/media/pci/zoran/zoran_card.c
+++ b/drivers/media/pci/zoran/zoran_card.c
@@ -69,7 +69,7 @@ MODULE_PARM_DESC(card, "Card type");
*/

static unsigned long vidmem; /* default = 0 - Video memory base address */
-module_param(vidmem, ulong, 0444);
+module_param_hw(vidmem, ulong, iomem, 0444);
MODULE_PARM_DESC(vidmem, "Default video memory base address");

/*
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 41b54e40176c..40d305842a9b 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -833,11 +833,11 @@ MODULE_LICENSE("GPL");
module_param(type, int, 0444);
MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug");

-module_param(io, int, 0444);
+module_param_hw(io, int, ioport, 0444);
MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)");

/* some architectures (e.g. intel xscale) have memory mapped registers */
-module_param(iommap, bool, 0444);
+module_param_hw(iommap, bool, other, 0444);
MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)");

/*
@@ -845,13 +845,13 @@ MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory map
* on 32bit word boundaries.
* See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out()
*/
-module_param(ioshift, int, 0444);
+module_param_hw(ioshift, int, other, 0444);
MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)");

-module_param(irq, int, 0444);
+module_param_hw(irq, int, irq, 0444);
MODULE_PARM_DESC(irq, "Interrupt (4 or 3)");

-module_param(share_irq, bool, 0444);
+module_param_hw(share_irq, bool, other, 0444);
MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)");

module_param(sense, int, 0444);
\
 
 \ /
  Last update: 2017-04-05 19:01    [W:1.187 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site