lkml.org 
[lkml]   [2017]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/3] dt: bindings: add pmu0 regs for USB PHYs on Allwinner H3/V3s/A64
On Wed, Apr 5, 2017 at 8:58 PM, Kishon Vijay Abraham I <kishon@ti.com> wrote:
>
>
> On Wednesday 05 April 2017 06:20 PM, Icenowy Zheng wrote:
>> From: Icenowy Zheng <icenowy@aosc.xyz>
>>
>> Allwinner H3/V3s/A64 SoCs have a special USB PHY0 that can route to two
>> controllers: one is MUSB and the other is a EHCI/OHCI pair.
>>
>> When it's routed to EHCI/OHCI pair, it will needs a "pmu0" regs to
>> tweak, like other EHCI/OHCI pairs in Allwinner SoCs.
>>
>> Add this to the binding of USB PHYs on Allwinner H3/V3s/A64.
>>
>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>> Acked-by: Chen-Yu Tsai <wens@csie.org>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>
>> Kishon, could you push this to 4.11?
>
> Is this for the patch titled "phy: sun4i-usb: add support for V3s USB PHY" that
> was added during the last merge window.

Yes. In fact, as the description suggests, this also applies retroactively to
H3 and A64, which were added in the following commits:

4.9 732e35da7b4a ("dt: bindings: add bindings for Allwinner A64 usb phy")
4.5 626a630e003c ("phy-sun4i-usb: Add support for the host usb-phys found
on the H3 SoC")

Though this was missed at the time the binding was added.

ChenYu

> this patch looks simpler enough to be merged in this -rc cycle. However it
> depends on Greg KH.
>
> Thanks
> Kishon
>
>>
>> Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
>> index e42334258185..005bc22938ff 100644
>> --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
>> @@ -15,6 +15,7 @@ Required properties:
>> - reg : a list of offset + length pairs
>> - reg-names :
>> * "phy_ctrl"
>> + * "pmu0" for H3, V3s and A64
>> * "pmu1"
>> * "pmu2" for sun4i, sun6i or sun7i
>> - #phy-cells : from the generic phy bindings, must be 1
>>

\
 
 \ /
  Last update: 2017-04-05 18:32    [W:0.040 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site