lkml.org 
[lkml]   [2017]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V10 00/12] IOMMU probe deferral support
On Tue, Apr 04, 2017 at 01:49:29PM +0100, Robin Murphy wrote:
> On 04/04/17 11:18, Sricharan R wrote:
> > This series calls the dma ops configuration for the devices
> > at a generic place so that it works for all busses.
> > The dma_configure_ops for a device is now called during
> > the device_attach callback just before the probe of the
> > bus/driver is called. Similarly dma_deconfigure is called during
> > device/driver_detach path.
> >
> > pci_bus_add_devices (platform/amba)(_device_create/driver_register)
> > | |
> > pci_bus_add_device (device_add/driver_register)
> > | |
> > device_attach device_initial_probe
> > | |
> > __device_attach_driver __device_attach_driver
> > |
> > driver_probe_device
> > |
> > really_probe
> > |
> > dma_configure
> >
> > Similarly on the device/driver_unregister path __device_release_driver is
> > called which inturn calls dma_deconfigure.
> >
> > Rebased the series against mainline 4.11-rc5. Applies and builds cleanly
> > against mainline and linux-next, iommu-next.
> >
> > * Tested with platform and pci devices for probe deferral
> > and reprobe on arm64 based platform.
>
> Sricharan, thanks for keeping this going - I really think we're there now :)

FYI, I re-tested this series with ACPI and tried a merge with IORT
patches queued for 4.12 (via arm64) and there does not seem to be any
merge conflicts so it should be ready to go.

Thanks,
Lorenzo

> Joerg, I realise that at -rc5 time is getting on a bit already, but even
> the non-vintage parts of the series are pretty mature now so it would be
> nice to at least give it a spin in -next. If you don't quite share my
> confidence for landing it in 4.12, please consider it for early next
> cycle to get a full workout.
>
> Thanks,
> Robin.
>
> > Previous post of this series [8].
> >
> > Please note that, i have kept the tested/acked tags intact from V8
> > because V9/10 were for more fixes that was added, so the original
> > tags that was given for the functional testing remains the same.
> >
> > [V10]
> > * Rebased on top of 4.11-rc5.
> >
> > * Fixed coherent_dma_mask 64bit overflow issue [8]
> > for OF. The fix for OF was added as a separate
> > patch#6, since the issue is true even without probe deferral,
> > but gets reproduced with the probe deferral series.
> > Added Lorenzo's ACPI fix for coherent_dma_mask overflow
> > and the fix for dma_configure getting called more than
> > once for the same device.
> >
> > * Also fixed an build issue caught by kbuild robot for
> > m68k arch. The issue was dma_(de)configure was not
> > getting defined for !CONFIG_HAS_DMA, so fixed that as well.
> >
> > [V9]
> > * Rebased on top of 4.11-rc1.
> >
> > * Merged Robin's fixes for legacy binding issue,
> > pci devices with no iommu-map property and deferencing
> > of_iommu_table after init.
> >
> > [V8]
> > * Picked up all the acks and tested tags from Marek and
> > Hanjun for DT and ACPI patches respectively, since
> > no functional changes was done.
> >
> > * Addressed Minor comments Sinan and Bjorn.
> >
> > * Added Robin's fix for fixing the deferencing NULL for
> > of_iommu_table after init in patch #2.
> >
> > * Rebased it on top of linux-next
> >
> > [V7]
> > * Updated the subject and commit log for patch #6 as per
> > comments from Lorenzo. No functional changes.
> >
> > [V6]
> > * Fixed a bug in dma_configure function pointed out by
> > Robin.
> > * Reordered the patches as per comments from Robin and
> > Lorenzo.
> > * Added Tags.
> >
> > [V5]
> > * Reworked the pci configuration code hanging outside and
> > pushed it to dma_configure as in PATCH#5,6,7.
> > Also added a couple of patches that Lorenzo provided for
> > correcting the Probe deferring mechanism in case of
> > ACPI devices from here [5].
> >
> > [V4]
> > * Took the reworked patches [2] from Robin's branch and
> > rebased on top of Lorenzo's ACPI IORT ARM support series [3].
> >
> > * Added the patches for moving the dma ops configuration of
> > acpi based devices to probe time as well.
> > [V3]
> > * Removed the patch to split dma_masks/dma_ops configuration
> > separately based on review comments that both masks and ops are
> > required only during the device probe time.
> >
> > * Reworked the series based on Generic DT bindings series.
> >
> > * Added call to iommu's remove_device in the cleanup path for arm and
> > arm64.
> >
> > * Removed the notifier trick in arm64 to handle early device
> > registration.
> >
> > * Added reset of dma_ops in cleanup path for arm based on comments.
> >
> > * Fixed the pci_iommu_configure path and tested with PCI device as
> > well.
> >
> > * Fixed a bug to return the correct iommu_ops from patch 7 [4] in
> > last post.
> >
> > * Fixed few other cosmetic comments.
> >
> > [V2]
> > * Updated the Initial post to call dma_configure/deconfigure from
> > generic code
> >
> > * Added iommu add_device callback from of_iommu_configure path
> >
> > [V1]
> > * Initial post from Laurent Pinchart [1]
> >
> > [1] http://lists.linuxfoundation.org/pipermail/iommu/2015-May/013016.html
> > [2] http://www.linux-arm.org/git?p=linux-rm.git;a=shortlog;h=refs/heads/iommu/defer
> > [3] https://lkml.org/lkml/2016/11/21/141
> > [4] https://www.mail-archive.com/iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx/msg13940.html
> > [5] git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git iommu/probe-deferral
> > [6] http://www.spinics.net/lists/linux-pci/msg57992.html
> > [7] https://www.spinics.net/lists/arm-kernel/msg556209.html
> > [8] http://patchwork.ozlabs.org/patch/743898/
> >
> > Laurent Pinchart (3):
> > of: dma: Move range size workaround to of_dma_get_range()
> > of: dma: Make of_dma_deconfigure() public
> > iommu: of: Handle IOMMU lookup failure with deferred probing or error
> >
> > Lorenzo Pieralisi (2):
> > ACPI/IORT: Add function to check SMMUs drivers presence
> > ACPI/IORT: Remove linker section for IORT entries probing
> >
> > Robin Murphy (3):
> > iommu/of: Refactor of_iommu_configure() for error handling
> > iommu/of: Prepare for deferred IOMMU configuration
> > iommu/arm-smmu: Clean up early-probing workarounds
> >
> > Sricharan R (4):
> > of: device: Fix overflow of coherent_dma_mask
> > of/acpi: Configure dma operations at probe time for platform/amba/pci
> > bus devices
> > drivers: acpi: Handle IOMMU lookup failure with deferred probing or
> > error
> > arm64: dma-mapping: Remove the notifier trick to handle early setting
> > of dma_ops
> >
> > arch/arm64/mm/dma-mapping.c | 142 +++++---------------------------------
> > drivers/acpi/arm64/iort.c | 48 ++++++++++++-
> > drivers/acpi/glue.c | 5 --
> > drivers/acpi/scan.c | 11 ++-
> > drivers/base/dd.c | 9 +++
> > drivers/base/dma-mapping.c | 41 +++++++++++
> > drivers/iommu/arm-smmu-v3.c | 46 +-----------
> > drivers/iommu/arm-smmu.c | 110 +++++++++++++----------------
> > drivers/iommu/of_iommu.c | 126 ++++++++++++++++++++++++---------
> > drivers/of/address.c | 20 +++++-
> > drivers/of/device.c | 36 +++++-----
> > drivers/of/platform.c | 10 +--
> > drivers/pci/probe.c | 28 --------
> > include/acpi/acpi_bus.h | 2 +-
> > include/asm-generic/vmlinux.lds.h | 1 -
> > include/linux/acpi.h | 7 +-
> > include/linux/acpi_iort.h | 3 -
> > include/linux/dma-mapping.h | 12 ++++
> > include/linux/of_device.h | 10 ++-
> > 19 files changed, 329 insertions(+), 338 deletions(-)
> >
>

\
 
 \ /
  Last update: 2017-04-05 12:08    [W:0.256 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site