Messages in this thread | | | Subject | Re: [PATCH v2 2/4] cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend | From | Lucas Stach <> | Date | Wed, 05 Apr 2017 10:03:45 +0200 |
| |
Am Dienstag, den 04.04.2017, 20:04 +0300 schrieb Leonard Crestez: > If the cpufreq driver tries to modify voltage/freq during suspend/resume > it might need to control an external PMIC via I2C or SPI but those > devices might be already suspended. This issue is likely to happen > whenever the LDOs have their vin-supply set. > > To avoid this scenario we just increase cpufreq to the maximum before > suspend. > > Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> --- > drivers/cpufreq/imx6q-cpufreq.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c > index be90ee3..786122e 100644 > --- a/drivers/cpufreq/imx6q-cpufreq.c > +++ b/drivers/cpufreq/imx6q-cpufreq.c > @@ -161,8 +161,13 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index) > > static int imx6q_cpufreq_init(struct cpufreq_policy *policy) > { > + int ret; > + > policy->clk = arm_clk; > - return cpufreq_generic_init(policy, freq_table, transition_latency); > + ret = cpufreq_generic_init(policy, freq_table, transition_latency); > + policy->suspend_freq = policy->max; > + > + return ret; > } > > static struct cpufreq_driver imx6q_cpufreq_driver = { > @@ -173,6 +178,7 @@ static struct cpufreq_driver imx6q_cpufreq_driver = { > .init = imx6q_cpufreq_init, > .name = "imx6q-cpufreq", > .attr = cpufreq_generic_attr, > + .suspend = cpufreq_generic_suspend, > }; > > static int imx6q_cpufreq_probe(struct platform_device *pdev)
| |