lkml.org 
[lkml]   [2017]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] power: supply: sbs-battery: Correct supply status with current draw
Date
The status reported directly by the battery controller is not always
reliable and should be corrected based on the current draw information.

This implements such a correction with a dedicated function, called
where the supply status is retrieved.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
---
drivers/power/supply/sbs-battery.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
index 3e7125c8e4d1..29c4e277abf1 100644
--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -295,6 +295,31 @@ static int sbs_write_word_data(struct i2c_client *client, u8 address,
return 0;
}

+static int sbs_status_correct(struct i2c_client *client, int *intval)
+{
+ int ret;
+
+ ret = sbs_read_word_data(client, sbs_data[REG_CURRENT].addr);
+ if (ret < 0)
+ return ret;
+
+ ret = (s16)ret;
+
+ /* Not drawing current means full (cannot be not charging) */
+ if (ret == 0)
+ *intval = POWER_SUPPLY_STATUS_FULL;
+
+ if (*intval == POWER_SUPPLY_STATUS_FULL) {
+ /* Drawing or providing current when full */
+ if (ret > 0)
+ *intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ret < 0)
+ *intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ return 0;
+}
+
static int sbs_get_battery_presence_and_health(
struct i2c_client *client, enum power_supply_property psp,
union power_supply_propval *val)
@@ -401,6 +426,8 @@ static int sbs_get_battery_property(struct i2c_client *client,
else
val->intval = POWER_SUPPLY_STATUS_CHARGING;

+ sbs_status_correct(client, &val->intval);
+
if (chip->poll_time == 0)
chip->last_state = val->intval;
else if (chip->last_state != val->intval) {
@@ -721,6 +748,8 @@ static void sbs_delayed_work(struct work_struct *work)
else
ret = POWER_SUPPLY_STATUS_CHARGING;

+ sbs_status_correct(chip->client, &ret);
+
if (chip->last_state != ret) {
chip->poll_time = 0;
power_supply_changed(chip->power_supply);
--
2.12.2
\
 
 \ /
  Last update: 2017-04-25 17:33    [W:0.048 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site