lkml.org 
[lkml]   [2017]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 3/4] gpio: aspeed: Add debounce support
On Fri, Apr 7, 2017 at 2:59 PM, Andrew Jeffery <andrew@aj.id.au> wrote:

> Each GPIO in the Aspeed GPIO controller can choose one of four input
> debounce states: to disable debouncing for an input, or select from one
> of three programmable debounce timer values. Each GPIO in a
> four-bank-set is assigned one bit in each of two debounce configuration
> registers dedicated to the set, and selects a debounce state by
> configuring the two bits to select one of the four options.
>
> The limitation on debounce timer values is managed by mapping offsets
> onto a configured timer value and keeping count of the number of users
> a timer has. Timer values are configured on a first-come-first-served
> basis.
>
> A small twist in the hardware design is that the debounce configuration
> register numbering is reversed with respect to the binary representation
> of the debounce timer of interest (i.e. debounce register 1 represents
> bit 1, and debounce register 2 represents bit 0 of the timer numbering).
>
> Tested on an AST2500EVB with additional inspection under QEMU's
> romulus-bmc machine.
>
> Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Patch applied.

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2017-04-24 14:50    [W:1.336 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site