lkml.org 
[lkml]   [2017]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] fpga: Add flag to indicate SPI bitstream is bit-reversed
Date
Add a flag that is passed to the write_init() callback,
indicating that the SPI bitstream starts with LSB first.
SPI controllers usually send data with MSB first. If an
FPGA expects bitstream data as LSB first, the data must
be reversed either by the SPI controller or by the driver.

Alternatively the bitstream could be prepared as bit-reversed
to avoid the bit-swapping while sending. This flag indicates
such bit-reversed SPI bitstream. The low-level driver will
deal with the flag and perform bit-reversing if needed.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
include/linux/fpga/fpga-mgr.h | 3 +++
1 file changed, 3 insertions(+)

diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index b4ac24c..5a055a0 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -67,10 +67,13 @@ enum fpga_mgr_states {
* FPGA Manager flags
* FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported
* FPGA_MGR_EXTERNAL_CONFIG: FPGA has been configured prior to Linux booting
+ * FPGA_MGR_SPI_BITSTREAM_LSB_FIRST: SPI bitstream bit order is reversed to
+ * start with LSB first
*/
#define FPGA_MGR_PARTIAL_RECONFIG BIT(0)
#define FPGA_MGR_EXTERNAL_CONFIG BIT(1)
#define FPGA_MGR_ENCRYPTED_BITSTREAM BIT(2)
+#define FPGA_MGR_SPI_BITSTREAM_LSB_FIRST BIT(3)

/**
* struct fpga_image_info - information specific to a FPGA image
--
2.7.4
\
 
 \ /
  Last update: 2017-04-20 23:43    [W:0.039 / U:4.540 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site