[lkml]   [2017]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3] fpga manager: Add Altera CvP driver
Hi Matthew,

On Thu, 20 Apr 2017 10:29:34 -0700 (PDT) wrote:
>Since you say the driver works with Arria-10, I thought I would give it
>a try with the Altera Arria10 PCIe DevKit I am using. I successfully
>compiled your patch as an out of tree module against a 3.10 kernel. The
>module successfully loaded and created instances for both boards in the

thanks for testing!

>Now that I have the driver instances running, I'm not sure howto actually
>perform CvP. Do you use a debugfs interface or something else? Do you
>use the sof or an rbf file?

I used the debugfs interface for first testing, now I'm using custom
fpga config interface driver, but it depends on many other drivers
and won't work without additional special hardware.

I use an rbf file. The v2 patch [1] used a module parameter to specify
firmware file name for a given PCIe device, but it is bypassing the
framework and is not acceptable for mainline.



 \ /
  Last update: 2017-04-20 19:48    [W:0.091 / U:3.084 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site