lkml.org 
[lkml]   [2017]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 7/7] ARM: ZTE: Use - instead of @ for DT OPP entries
Date
Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
arch/arm64/boot/dts/zte/zx296718.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index b850b2cd0adc..2c7dc69987df 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -118,27 +118,27 @@
compatible = "operating-points-v2";
opp-shared;

- opp@500000000 {
+ opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
clock-latency-ns = <500000>;
};

- opp@648000000 {
+ opp-648000000 {
opp-hz = /bits/ 64 <648000000>;
clock-latency-ns = <500000>;
};

- opp@800000000 {
+ opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
clock-latency-ns = <500000>;
};

- opp@1000000000 {
+ opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
clock-latency-ns = <500000>;
};

- opp@1188000000 {
+ opp-1188000000 {
opp-hz = /bits/ 64 <1188000000>;
clock-latency-ns = <500000>;
};
--
2.12.0.432.g71c3a4f4ba37
\
 
 \ /
  Last update: 2017-04-20 07:46    [W:0.032 / U:1.232 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site