lkml.org 
[lkml]   [2017]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/5] ARM: dts: rockchip: add ARM Mali GPU node for rk3288
From
Date
Hi Heiko,

On 19/04/17 09:59, Heiko Stuebner wrote:
> Am Mittwoch, 19. April 2017, 09:06:18 CEST schrieb Guillaume Tucker:
>> Add Mali GPU device tree node for the rk3288 SoC, with devfreq
>> opp table.
>>
>> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
>> Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
>> ---
>> arch/arm/boot/dts/rk3288.dtsi | 22 ++++++++++++++++++++++
>> 1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
>> index df8a0dbe9d91..187eed528f83 100644
>> --- a/arch/arm/boot/dts/rk3288.dtsi
>> +++ b/arch/arm/boot/dts/rk3288.dtsi
>> @@ -43,6 +43,7 @@
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> #include <dt-bindings/pinctrl/rockchip.h>
>> #include <dt-bindings/clock/rk3288-cru.h>
>> +#include <dt-bindings/power/rk3288-power.h>
>> #include <dt-bindings/thermal/thermal.h>
>> #include <dt-bindings/power/rk3288-power.h>
>> #include <dt-bindings/soc/rockchip,boot-mode.h>
>> @@ -227,6 +228,27 @@
>> ports = <&vopl_out>, <&vopb_out>;
>> };
>>
>> + gpu: mali@ffa30000 {
>
> please sort nodes by address. ffa30000 should be placed below hdmi@ff980000
> and above qos@ffaa0000 .

Sure, will fix that in v4.

>> + compatible = "arm,mali-t760", "arm,mali-midgard";
>
> As indicated before I don't trust that a generic binding will work for
> everything, so I would feel safer if we had a "rockchip,rk3288-mali" in
> front for future purposes, making it a
>
> compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";

OK, sorry I overlooked this part. I'll add it in v4 with a
vendor compatible string in the binding documentation.

>> + reg = <0xffa30000 0x10000>;
>> + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "job", "mmu", "gpu";
>> + clocks = <&cru ACLK_GPU>;
>> + operating-points = <
>> + /* KHz uV */
>> + 100000 950000
>> + 200000 950000
>> + 300000 1000000
>> + 400000 1100000
>> + 500000 1200000
>> + 600000 1250000
>> + >;
>
> Wasn't there a wish for opp-v2 in a previous version?

Well it wasn't entirely clear to me in Rob's email whether it was
necessary to use opp-v2 now or rather if it would be a potential
option whenever opp-v2 was needed. If operating-points (v1) are
being deprecated then I can change that in my next patch v4.
Using operating-points-v2 with the Mali driver works as far as I
can tell on rk3288 so that's not an issue.

Thanks,
Guillaume

\
 
 \ /
  Last update: 2017-04-20 07:45    [W:0.049 / U:0.616 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site