lkml.org 
[lkml]   [2017]   [Apr]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/16] clocksource: arm_arch_timer: rework PPI selection
Date
From: Fu Wei <fu.wei@linaro.org>

Currently, the arch timer driver uses ARCH_TIMER_PHYS_SECURE_PPI to mean
the driver will use the secure PPI *and* potentially also use the
non-secure PPI. This is somewhat confusing.

For arm64 it never makes sense to use the secure PPI, but we do anyway,
inheriting this behaviour from 32-bit arm. For ACPI, we may not even
have a valid secure PPI, so we need to be able to only request the
non-secure PPI.

To that end, this patch reworks the timer driver so that we can request
the non-secure PPI alone. The PPI selection is split out into a new
function, arch_timer_select_ppi(), and verification of the selected PPI
is shifted out to callers (as DT may select the PPI by other means and
must handle this anyway).

We now consistently use arch_timer_has_nonsecure_ppi() to determine
whether we must manage a non-secure PPI *in addition* to a secure PPI.
When we only have a non-secure PPI, this returns false.

Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[Mark: reword commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
---
drivers/clocksource/arm_arch_timer.c | 77 +++++++++++++++++++++---------------
1 file changed, 46 insertions(+), 31 deletions(-)

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 15059c9..94de018 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -992,7 +992,7 @@ static int __init arch_timer_register(void)
case ARCH_TIMER_PHYS_NONSECURE_PPI:
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
- if (!err && arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]) {
+ if (!err && arch_timer_has_nonsecure_ppi()) {
ppi = arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_phys,
"arch_timer", arch_timer_evt);
@@ -1114,39 +1114,41 @@ static int __init arch_timer_common_init(void)
return arch_timer_arch_init();
}

-static int __init arch_timer_init(void)
+/**
+ * arch_timer_select_ppi() - Select suitable PPI for the current system.
+ *
+ * If HYP mode is available, we know that the physical timer
+ * has been configured to be accessible from PL1. Use it, so
+ * that a guest can use the virtual timer instead.
+ *
+ * On ARMv8.1 with VH extensions, the kernel runs in HYP. VHE
+ * accesses to CNTP_*_EL1 registers are silently redirected to
+ * their CNTHP_*_EL2 counterparts, and use a different PPI
+ * number.
+ *
+ * If no interrupt provided for virtual timer, we'll have to
+ * stick to the physical timer. It'd better be accessible...
+ * For arm64 we never use the secure interrupt.
+ *
+ * Return: a suitable PPI type for the current system.
+ */
+static enum arch_timer_ppi_nr __init arch_timer_select_ppi(void)
{
- int ret;
- /*
- * If HYP mode is available, we know that the physical timer
- * has been configured to be accessible from PL1. Use it, so
- * that a guest can use the virtual timer instead.
- *
- * If no interrupt provided for virtual timer, we'll have to
- * stick to the physical timer. It'd better be accessible...
- *
- * On ARMv8.1 with VH extensions, the kernel runs in HYP. VHE
- * accesses to CNTP_*_EL1 registers are silently redirected to
- * their CNTHP_*_EL2 counterparts, and use a different PPI
- * number.
- */
- if (is_hyp_mode_available() || !arch_timer_ppi[ARCH_TIMER_VIRT_PPI]) {
- bool has_ppi;
+ if (is_kernel_in_hyp_mode())
+ return ARCH_TIMER_HYP_PPI;

- if (is_kernel_in_hyp_mode()) {
- arch_timer_uses_ppi = ARCH_TIMER_HYP_PPI;
- has_ppi = !!arch_timer_ppi[ARCH_TIMER_HYP_PPI];
- } else {
- arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
- has_ppi = (!!arch_timer_ppi[ARCH_TIMER_PHYS_SECURE_PPI] ||
- !!arch_timer_ppi[ARCH_TIMER_PHYS_NONSECURE_PPI]);
- }
+ if (!is_hyp_mode_available() && arch_timer_ppi[ARCH_TIMER_VIRT_PPI])
+ return ARCH_TIMER_VIRT_PPI;

- if (!has_ppi) {
- pr_warn("No interrupt available, giving up\n");
- return -EINVAL;
- }
- }
+ if (IS_ENABLED(CONFIG_ARM64))
+ return ARCH_TIMER_PHYS_NONSECURE_PPI;
+
+ return ARCH_TIMER_PHYS_SECURE_PPI;
+}
+
+static int __init arch_timer_init(void)
+{
+ int ret;

ret = arch_timer_register();
if (ret)
@@ -1188,6 +1190,13 @@ static int __init arch_timer_of_init(struct device_node *np)
if (IS_ENABLED(CONFIG_ARM) &&
of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
arch_timer_uses_ppi = ARCH_TIMER_PHYS_SECURE_PPI;
+ else
+ arch_timer_uses_ppi = arch_timer_select_ppi();
+
+ if (!arch_timer_ppi[arch_timer_uses_ppi]) {
+ pr_err("No interrupt available, giving up\n");
+ return -EINVAL;
+ }

/* On some systems, the counter stops ticking when in suspend. */
arch_counter_suspend_stop = of_property_read_bool(np,
@@ -1333,6 +1342,12 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
/* Get the frequency from CNTFRQ */
arch_timer_detect_rate(NULL, NULL);

+ arch_timer_uses_ppi = arch_timer_select_ppi();
+ if (!arch_timer_ppi[arch_timer_uses_ppi]) {
+ pr_err("No interrupt available, giving up\n");
+ return -EINVAL;
+ }
+
/* Always-on capability */
arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);

--
1.9.1
\
 
 \ /
  Last update: 2017-04-19 19:12    [W:0.118 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site