Messages in this thread Patch in this message | | | From | Andrey Smirnov <> | Subject | [PATCH v3 5/6] mtd: dataflash: Make use of "extened device information" | Date | Wed, 19 Apr 2017 08:23:04 -0700 |
| |
In anticipation of supporting chips that need it, extend the size of struct flash_info's 'jedec_id' field to make room 2 byte of extended device information as well as add code to fetch this data during jedec_probe().
Cc: cphealy@gmail.com Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> ---
Changes since [v2]:
- Make 'id' have same size as 'jedec'
- Get rid of eid_mask variable in favour of using GENMASK in-place
Changes since [v1]:
- Formatting
[v1] http://lkml.kernel.org/r/20170411161722.11164-1-andrew.smirnov@gmail.com [v2] http://lkml.kernel.org/r/20170418142127.23301-3-andrew.smirnov@gmail.com
drivers/mtd/devices/mtd_dataflash.c | 115 +++++++++++++++++++++--------------- 1 file changed, 68 insertions(+), 47 deletions(-)
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 2d3e403..941e8b7 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -687,7 +687,7 @@ struct flash_info { /* JEDEC id has a high byte of zero plus three data bytes: * the manufacturer id, then a two byte device id. */ - u32 jedec_id; + u64 jedec_id; /* The size listed here is what works with OP_ERASE_PAGE. */ unsigned nr_pages; @@ -710,62 +710,34 @@ static struct flash_info dataflash_data[] = { * These newer chips also support 128-byte security registers (with * 64 bytes one-time-programmable) and software write-protection. */ - { "AT45DB011B", 0x1f2200, 512, 264, 9, SUP_POW2PS}, - { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, + { "AT45DB011B", 0x1f22000000, 512, 264, 9, SUP_POW2PS}, + { "at45db011d", 0x1f22000000, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "AT45DB021B", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, - { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, + { "AT45DB021B", 0x1f23000000, 1024, 264, 9, SUP_POW2PS}, + { "at45db021d", 0x1f23000000, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "AT45DB041x", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, - { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, + { "AT45DB041x", 0x1f24000000, 2048, 264, 9, SUP_POW2PS}, + { "at45db041d", 0x1f24000000, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "AT45DB081B", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, - { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, + { "AT45DB081B", 0x1f25000000, 4096, 264, 9, SUP_POW2PS}, + { "at45db081d", 0x1f25000000, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, - { "AT45DB161x", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, - { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, + { "AT45DB161x", 0x1f26000000, 4096, 528, 10, SUP_POW2PS}, + { "at45db161d", 0x1f26000000, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, - { "AT45DB321x", 0x1f2700, 8192, 528, 10, 0}, /* rev C */ + { "AT45DB321x", 0x1f27000000, 8192, 528, 10, 0}, /* rev C */ - { "AT45DB321x", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, - { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, + { "AT45DB321x", 0x1f27010000, 8192, 528, 10, SUP_POW2PS}, + { "at45db321d", 0x1f27010000, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, - { "AT45DB642x", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, - { "at45db642d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, + { "AT45DB642x", 0x1f28000000, 8192, 1056, 11, SUP_POW2PS}, + { "at45db642d", 0x1f28000000, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, }; -static struct flash_info *jedec_probe(struct spi_device *spi) +static struct flash_info *jedec_lookup(struct spi_device *spi, u64 jedec) { - int ret; - u8 code = OP_READ_ID; - u8 id[3]; - u32 jedec; - struct flash_info *info; int status; - - /* - * JEDEC also defines an optional "extended device information" - * string for after vendor-specific data, after the three bytes - * we use here. Supporting some chips might require using it. - * - * If the vendor ID isn't Atmel's (0x1f), assume this call failed. - * That's not an error; only rev C and newer chips handle it, and - * only Atmel sells these chips. - */ - ret = spi_write_then_read(spi, &code, 1, id, 3); - if (ret < 0) { - dev_dbg(&spi->dev, "error %d reading JEDEC ID\n", ret); - return ERR_PTR(ret); - } - - if (id[0] != CFI_MFR_ATMEL) - return NULL; - - jedec = id[0]; - jedec = jedec << 8; - jedec |= id[1]; - jedec = jedec << 8; - jedec |= id[2]; + struct flash_info *info; for (info = dataflash_data; info < dataflash_data + ARRAY_SIZE(dataflash_data); @@ -793,12 +765,61 @@ static struct flash_info *jedec_probe(struct spi_device *spi) } } + return NULL; +} + +static struct flash_info *jedec_probe(struct spi_device *spi) +{ + int ret; + u8 code = OP_READ_ID; + u64 jedec; + u8 id[sizeof(jedec)] = {0}; + const unsigned int id_size = 5; + const unsigned int first_byte = sizeof(id) - id_size; + struct flash_info *info; + + /* + * JEDEC also defines an optional "extended device information" + * string for after vendor-specific data, after the three bytes + * we use here. Supporting some chips might require using it. + * + * If the vendor ID isn't Atmel's (0x1f), assume this call failed. + * That's not an error; only rev C and newer chips handle it, and + * only Atmel sells these chips. + */ + ret = spi_write_then_read(spi, &code, 1, &id[first_byte], id_size); + if (ret < 0) { + pr_debug("%s: error %d reading JEDEC ID\n", + dev_name(&spi->dev), ret); + return ERR_PTR(ret); + } + + if (id[first_byte] != CFI_MFR_ATMEL) + return NULL; + + jedec = be64_to_cpup((__be64 *)id); + + info = jedec_lookup(spi, jedec); + if (info) + return info; + + /* + * Clear extended id bits (bits 0 through 15) and try to find + * a match again in case our chip does not support returning + * extended ID information and we got invalid bits instead + */ + jedec &= GENMASK_ULL(63, 16); + + info = jedec_lookup(spi, jedec); + if (info) + return info; + /* * Treat other chips as errors ... we won't know the right page * size (it might be binary) even when we can tell which density * class is involved (legacy chip id scheme). */ - dev_warn(&spi->dev, "JEDEC id %06x not handled\n", jedec); + dev_warn(&spi->dev, "JEDEC id %010llx not handled\n", jedec); return ERR_PTR(-ENODEV); } -- 2.9.3
| |