lkml.org 
[lkml]   [2017]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/6] platform/x86: fujitsu-laptop: do not log LED registration failures
On Tue, Apr 18, 2017 at 10:10:01AM +0200, Michał Kępień wrote:
> Jonathan, I hope this response to Darren's message also addresses your
> concerns. Feel free to let me know if it does not.
>
> > On Fri, Apr 07, 2017 at 03:07:12PM +0200, Michał Kępień wrote:
> > > If acpi_fujitsu_laptop_leds_register() returns an error, the latter will
> > > become the return value of acpi_fujitsu_laptop_add(), which in turn will
> > > be reported by driver core. Simplify code by replacing pr_err() calls
> > > with return statements. Return 0 instead of result when no errors occur
> > > in order to make the code easier to read.
> >
> > Hi Michał,
> >
> > Jonathan's comment regarding the information loss of removing the pr_err
> > statements seems valid to me. Based on the outer if block, I take it each
> > registration only fails in true error scenarios and not because some laptop
> > might have one but not another LED in the list.
>
> Correct.
>
> > If so, then the pr_err messages
> > would only appear when there was a legitimate problem. I think they're worth
>
> I am not hell-bent on removing these pr_err() calls, but allow me to
> briefly walk you through my thought process.
>
> devm_led_classdev_register() is basically a managed wrapper for
> led_classdev_register(), so let's see under what circumstances the
> latter may fail. While it does quite a bit, its return value can only
> be different than zero for one of two reasons:
>
> - there is already a LED with the same name present in the system, so
> the kernel automatically renames the one we are registering and the
> length of the generated name exceeds LED_MAX_NAME_SIZE,
>
> - device_create_with_groups() fails, either because we are out of
> memory or the device hierarchy is screwed up.
>
> The first case will never happen, given that the longest LED name that
> fujitsu-laptop tries to register is 18 bytes long, the counter used for
> auto-incrementation is an unsigned int and LED_MAX_NAME_SIZE is 64.
>
> In the second case, we are likely to be notified by driver core about
> the exact nature of the failure, but more importantly, logging which LED
> "caused" the failure makes us none the wiser. Actions taken by the
> kernel in response to each of the devm_led_classdev_register() calls are
> virtually identical and if any of these fails, we are more than likely
> to have problems way more severe than non-functioning LEDs.
>
> Have I missed anything or perhaps assumed something I should have not?
>
> > This seems to introduce a behavior change as well. Previously only the last
> > LED registered would determine the result - which is wrong of course and I
> > believe you noted a related bug in an early patch. Previously, however, if
> > LOGOLAMP_POWERON failed, for example, the KEYBOARD_LAMPS would still be attempted.
> >
> > So the question really comes down to this: Is there a legitimate situation in
> > which one LEDs registration fails and another succeeds? If so, then this would
> > constitute a regression for such systems.
>
> The behavior change you mentioned is intentional. As pointed out above,
> if any devm_led_classdev_register() call fails, it means we have reached
> some inconsistent state which is really unlikely to be improved by
> further attempts to register even more devices.
>
> What do you guys think?

Excellent rationale, I withdraw the concern.

Jonathan?

--
Darren Hart
VMware Open Source Technology Center

\
 
 \ /
  Last update: 2017-04-18 18:02    [W:0.613 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site