lkml.org 
[lkml]   [2017]   [Apr]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] [media] uvcvideo: Kill video URBs on disconnect
Date
When an in-use webcam is disconnected, I noticed the following
messages:

uvcvideo: Failed to resubmit video URB (-19).

-19 is -ENODEV, which does make sense given that the device has
disappeared.

We could put a case for -ENODEV like we have with -ENOENT, -ECONNRESET
and -ESHUTDOWN, but the usb_unlink_urb() API documentation says that
'The disconnect function should synchronize with a driver's I/O
routines to insure that all URB-related activity has completed before
it returns.' So we should make an effort to proactively kill URBs in
the disconnect path instead.

Call uvc_enable_video() (specifying 0 to disable) in the disconnect
path, which kills and frees URBs.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>

---

Before this patch, yavta -c hangs when a camera is disconnected, but
with this patch it exits immediately after the camera is
disconnected. I'm not sure if this is acceptable - Laurent?

---
drivers/media/usb/uvc/uvc_driver.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 2390592f78e0..647e3d8a1256 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -1877,6 +1877,8 @@ static void uvc_unregister_video(struct uvc_device *dev)
if (!video_is_registered(&stream->vdev))
continue;

+ uvc_video_enable(stream, 0);
+
video_unregister_device(&stream->vdev);

uvc_debugfs_cleanup_stream(stream);
--
2.9.3
\
 
 \ /
  Last update: 2017-04-17 10:54    [W:0.084 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site