lkml.org 
[lkml]   [2017]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/8] ARM: dts: imx7s: Add node for GPC
On Thu, Apr 13, 2017 at 4:03 PM, Tyler Baker <tyler.baker@linaro.org> wrote:

> I've been testing your GPC/PCIe patch sets against v4.11-rc5 on my
> imx7d-cl-som-imx7, but hit a bit of a wall. When gpc is set as the
> interrupt-parent for the soc, the kernel seems to hang and not produce
> any output on the serial port[0]. I tried to enable earlyprintk, but
> no luck getting a trace. Reversing this change, gets the board
> booting[1], but obviously isn't using the gpc which is needed for PCIe
> support as I understand it. I assume you've tested these changes on a
> imx7d-sdb and are not seeing a similar issue? You can find the patches
> I've picked on top of v4.11-rc5 here[2], any idea what might be the
> issue?

Thanks for the report.

It seems this series depends on the drivers/soc/imx/gpcv2.c patches
that landed into linux-next.

In this case, it would be better to re-send this series after
4.12-rc11 is out to avoid the breakage.

\
 
 \ /
  Last update: 2017-04-13 21:19    [W:0.215 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site