lkml.org 
[lkml]   [2017]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 2/5] virtio-balloon: VIRTIO_BALLOON_F_BALLOON_CHUNKS
On Thu, Apr 13, 2017 at 05:35:05PM +0800, Wei Wang wrote:
> Add a new feature, VIRTIO_BALLOON_F_BALLOON_CHUNKS, which enables

Let's find a better name here.
VIRTIO_BALLOON_F_PAGE_CHUNK


> the transfer of the ballooned (i.e. inflated/deflated) pages in
> chunks to the host.
>
> The implementation of the previous virtio-balloon is not very
> efficient, because the ballooned pages are transferred to the
> host one by one. Here is the breakdown of the time in percentage
> spent on each step of the balloon inflating process (inflating
> 7GB of an 8GB idle guest).
>
> 1) allocating pages (6.5%)
> 2) sending PFNs to host (68.3%)
> 3) address translation (6.1%)
> 4) madvise (19%)
>
> It takes about 4126ms for the inflating process to complete.
> The above profiling shows that the bottlenecks are stage 2)
> and stage 4).
>
> This patch optimizes step 2) by transferring pages to the host in
> chunks. A chunk consists of guest physically continuous pages, and
> it is offered to the host via a base PFN (i.e. the start PFN of
> those physically continuous pages) and the size (i.e. the total
> number of the pages). A chunk is formated as below:

formatted

> --------------------------------------------------------
> | Base (52 bit) | Rsvd (12 bit) |
> --------------------------------------------------------
> --------------------------------------------------------
> | Size (52 bit) | Rsvd (12 bit) |
> --------------------------------------------------------
>
> By doing so, step 4) can also be optimized by doing address
> translation and madvise() in chunks rather than page by page.
>
> With this new feature, the above ballooning process takes ~590ms
> resulting in an improvement of ~85%.
>
> TODO: optimize stage 1) by allocating/freeing a chunk of pages
> instead of a single page each time.
>
> Signed-off-by: Wei Wang <wei.w.wang@intel.com>
> Signed-off-by: Liang Li <liang.z.li@intel.com>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>

So we don't need the bitmap to talk to host, it is just
a data structure we chose to maintain lists of pages, right?
OK as far as it goes but you need much better isolation for it.
Build a data structure with APIs such as _init, _cleanup, _add, _clear,
_find_first, _find_next.
Completely unrelated to pages, it just maintains bits.
Then use it here.


> ---
> drivers/virtio/virtio_balloon.c | 384 +++++++++++++++++++++++++++++++++---
> include/uapi/linux/virtio_balloon.h | 13 ++
> 2 files changed, 374 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
> index f59cb4f..5e2e7cc 100644
> --- a/drivers/virtio/virtio_balloon.c
> +++ b/drivers/virtio/virtio_balloon.c
> @@ -42,6 +42,10 @@
> #define OOM_VBALLOON_DEFAULT_PAGES 256
> #define VIRTBALLOON_OOM_NOTIFY_PRIORITY 80
>
> +#define PAGE_BMAP_SIZE (8 * PAGE_SIZE)
> +#define PFNS_PER_PAGE_BMAP (PAGE_BMAP_SIZE * BITS_PER_BYTE)
> +#define PAGE_BMAP_COUNT_MAX 32
> +

Please prefix with VIRTIO_BALLOON_ and add comments.

> static int oom_pages = OOM_VBALLOON_DEFAULT_PAGES;
> module_param(oom_pages, int, S_IRUSR | S_IWUSR);
> MODULE_PARM_DESC(oom_pages, "pages to free on OOM");
> @@ -50,6 +54,10 @@ MODULE_PARM_DESC(oom_pages, "pages to free on OOM");
> static struct vfsmount *balloon_mnt;
> #endif
>
> +/* Types of pages to chunk */
> +#define PAGE_CHUNK_TYPE_BALLOON 0
> +

Doesn't look like you are ever adding more types in this
patchset. Pls keep code simple, generalize it later.

> +#define MAX_PAGE_CHUNKS 4096

This is an order-4 allocation. I'd make it 4095 and then it's
an order-3 one.

> struct virtio_balloon {
> struct virtio_device *vdev;
> struct virtqueue *inflate_vq, *deflate_vq, *stats_vq;
> @@ -78,6 +86,32 @@ struct virtio_balloon {
> /* Synchronize access/update to this struct virtio_balloon elements */
> struct mutex balloon_lock;
>
> + /*
> + * Buffer for PAGE_CHUNK_TYPE_BALLOON:
> + * virtio_balloon_page_chunk_hdr +
> + * virtio_balloon_page_chunk * MAX_PAGE_CHUNKS
> + */
> + struct virtio_balloon_page_chunk_hdr *balloon_page_chunk_hdr;
> + struct virtio_balloon_page_chunk *balloon_page_chunk;
> +
> + /* Bitmap used to record pages */
> + unsigned long *page_bmap[PAGE_BMAP_COUNT_MAX];
> + /* Number of the allocated page_bmap */
> + unsigned int page_bmaps;
> +
> + /*
> + * The allocated page_bmap size may be smaller than the pfn range of
> + * the ballooned pages. In this case, we need to use the page_bmap
> + * multiple times to cover the entire pfn range. It's like using a
> + * short ruler several times to finish measuring a long object.
> + * The start location of the ruler in the next measurement is the end
> + * location of the ruler in the previous measurement.
> + *
> + * pfn_max & pfn_min: forms the pfn range of the ballooned pages
> + * pfn_start & pfn_stop: records the start and stop pfn in each cover

cover? what does this mean?

looks like you only use these to pass data to tell_host.
so pass these as parameters and you won't need to keep
them in this structure.

And then you can move this comment to set_page_bmap where
it belongs.

> + */
> + unsigned long pfn_min, pfn_max, pfn_start, pfn_stop;
> +
> /* The array of pfns we tell the Host about. */
> unsigned int num_pfns;
> __virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
> @@ -110,20 +144,201 @@ static void balloon_ack(struct virtqueue *vq)
> wake_up(&vb->acked);
> }
>
> -static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
> +static inline void init_page_bmap_range(struct virtio_balloon *vb)
> +{
> + vb->pfn_min = ULONG_MAX;
> + vb->pfn_max = 0;
> +}
> +
> +static inline void update_page_bmap_range(struct virtio_balloon *vb,
> + struct page *page)
> +{
> + unsigned long balloon_pfn = page_to_balloon_pfn(page);
> +
> + vb->pfn_min = min(balloon_pfn, vb->pfn_min);
> + vb->pfn_max = max(balloon_pfn, vb->pfn_max);
> +}
> +
> +/* The page_bmap size is extended by adding more number of page_bmap */

did you mean

Allocate more bitmaps to cover the given number of pfns
and add them to page_bmap

?

This isn't what this function does.
It blindly assumes 1 bitmap is allocated
and allocates more, up to PAGE_BMAP_COUNT_MAX.

> +static void extend_page_bmap_size(struct virtio_balloon *vb,
> + unsigned long pfns)
> +{
> + int i, bmaps;
> + unsigned long bmap_len;
> +
> + bmap_len = ALIGN(pfns, BITS_PER_LONG) / BITS_PER_BYTE;
> + bmap_len = ALIGN(bmap_len, PAGE_BMAP_SIZE);

Align? PAGE_BMAP_SIZE doesn't even have to be a power of 2 ...

> + bmaps = min((int)(bmap_len / PAGE_BMAP_SIZE),
> + PAGE_BMAP_COUNT_MAX);

I got lost here.

Please use things like ARRAY_SIZE instead of macros.

> +
> + for (i = 1; i < bmaps; i++) {
> + vb->page_bmap[i] = kmalloc(PAGE_BMAP_SIZE, GFP_KERNEL);
> + if (vb->page_bmap[i])
> + vb->page_bmaps++;
> + else
> + break;
> + }
> +}
> +
> +static void free_extended_page_bmap(struct virtio_balloon *vb)
> +{
> + int i, bmaps = vb->page_bmaps;
> +
> + for (i = 1; i < bmaps; i++) {
> + kfree(vb->page_bmap[i]);
> + vb->page_bmap[i] = NULL;
> + vb->page_bmaps--;
> + }
> +}
> +

What's the magic number 1 here?
Maybe you want to document what is going on.
Here's a guess:

We keep a single bmap around at all times.
If memory does not fit there, we allocate up to
PAGE_BMAP_COUNT_MAX of chunks.


> +static void free_page_bmap(struct virtio_balloon *vb)
> +{
> + int i;
> +
> + for (i = 0; i < vb->page_bmaps; i++)
> + kfree(vb->page_bmap[i]);
> +}
> +
> +static void clear_page_bmap(struct virtio_balloon *vb)
> +{
> + int i;
> +
> + for (i = 0; i < vb->page_bmaps; i++)
> + memset(vb->page_bmap[i], 0, PAGE_BMAP_SIZE);
> +}
> +
> +static void send_page_chunks(struct virtio_balloon *vb, struct virtqueue *vq,
> + int type, bool busy_wait)

busy_wait seems unused. pls drop.

> {
> struct scatterlist sg;
> + struct virtio_balloon_page_chunk_hdr *hdr;
> + void *buf;
> unsigned int len;
>
> - sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
> + switch (type) {
> + case PAGE_CHUNK_TYPE_BALLOON:
> + hdr = vb->balloon_page_chunk_hdr;
> + len = 0;
> + break;
> + default:
> + dev_warn(&vb->vdev->dev, "%s: chunk %d of unknown pages\n",
> + __func__, type);
> + return;
> + }
>
> - /* We should always be able to add one buffer to an empty queue. */
> - virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
> - virtqueue_kick(vq);
> + buf = (void *)hdr - len;

Moving back to before the header? How can this make sense?
It works fine since len is 0, so just buf = hdr.

> + len += sizeof(struct virtio_balloon_page_chunk_hdr);
> + len += hdr->chunks * sizeof(struct virtio_balloon_page_chunk);
> + sg_init_table(&sg, 1);
> + sg_set_buf(&sg, buf, len);
> + if (!virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL)) {
> + virtqueue_kick(vq);
> + if (busy_wait)
> + while (!virtqueue_get_buf(vq, &len) &&
> + !virtqueue_is_broken(vq))
> + cpu_relax();
> + else
> + wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> + hdr->chunks = 0;

Why zero it here after device used it? Better to zero before use.

> + }
> +}
> +
> +static void add_one_chunk(struct virtio_balloon *vb, struct virtqueue *vq,
> + int type, u64 base, u64 size)

what are the units here? Looks like it's in 4kbyte units?

> +{
> + struct virtio_balloon_page_chunk_hdr *hdr;
> + struct virtio_balloon_page_chunk *chunk;
> +
> + switch (type) {
> + case PAGE_CHUNK_TYPE_BALLOON:
> + hdr = vb->balloon_page_chunk_hdr;
> + chunk = vb->balloon_page_chunk;
> + break;
> + default:
> + dev_warn(&vb->vdev->dev, "%s: chunk %d of unknown pages\n",
> + __func__, type);
> + return;
> + }
> + chunk = chunk + hdr->chunks;
> + chunk->base = cpu_to_le64(base << VIRTIO_BALLOON_CHUNK_BASE_SHIFT);
> + chunk->size = cpu_to_le64(size << VIRTIO_BALLOON_CHUNK_SIZE_SHIFT);
> + hdr->chunks++;

Isn't this LE? You should keep it somewhere else.

> + if (hdr->chunks == MAX_PAGE_CHUNKS)
> + send_page_chunks(vb, vq, type, false);
and zero chunks here?
> +}
> +
> +static void chunking_pages_from_bmap(struct virtio_balloon *vb,

Does this mean "convert_bmap_to_chunks"?

> + struct virtqueue *vq,
> + unsigned long pfn_start,
> + unsigned long *bmap,
> + unsigned long len)
> +{
> + unsigned long pos = 0, end = len * BITS_PER_BYTE;
> +
> + while (pos < end) {
> + unsigned long one = find_next_bit(bmap, end, pos);
> +
> + if (one < end) {
> + unsigned long chunk_size, zero;
> +
> + zero = find_next_zero_bit(bmap, end, one + 1);


zero and one are unhelpful names unless they equal 0 and 1.
current/next?


> + if (zero >= end)
> + chunk_size = end - one;
> + else
> + chunk_size = zero - one;
> +
> + if (chunk_size)
> + add_one_chunk(vb, vq, PAGE_CHUNK_TYPE_BALLOON,
> + pfn_start + one, chunk_size);

Still not so what does a bit refer to? page or 4kbytes?
I think it should be a page.

> + pos = one + chunk_size;
> + } else
> + break;
> + }
> +}
> +



> +static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
> +{
> + if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_BALLOON_CHUNKS)) {
> + int pfns, page_bmaps, i;
> + unsigned long pfn_start, pfns_len;
> +
> + pfn_start = vb->pfn_start;
> + pfns = vb->pfn_stop - pfn_start + 1;
> + pfns = roundup(roundup(pfns, BITS_PER_LONG),
> + PFNS_PER_PAGE_BMAP);
> + page_bmaps = pfns / PFNS_PER_PAGE_BMAP;
> + pfns_len = pfns / BITS_PER_BYTE;
> +
> + for (i = 0; i < page_bmaps; i++) {
> + unsigned int bmap_len = PAGE_BMAP_SIZE;
> +
> + /* The last one takes the leftover only */

I don't understand what does this mean.

> + if (i + 1 == page_bmaps)
> + bmap_len = pfns_len - PAGE_BMAP_SIZE * i;
> +
> + chunking_pages_from_bmap(vb, vq, pfn_start +
> + i * PFNS_PER_PAGE_BMAP,
> + vb->page_bmap[i], bmap_len);
> + }
> + if (vb->balloon_page_chunk_hdr->chunks > 0)
> + send_page_chunks(vb, vq, PAGE_CHUNK_TYPE_BALLOON,
> + false);
> + } else {
> + struct scatterlist sg;
> + unsigned int len;
>
> - /* When host has read buffer, this completes via balloon_ack */
> - wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> + sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
>
> + /*
> + * We should always be able to add one buffer to an empty
> + * queue.
> + */
> + virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
> + virtqueue_kick(vq);
> +
> + /* When host has read buffer, this completes via balloon_ack */
> + wait_event(vb->acked, virtqueue_get_buf(vq, &len));
> + }
> }
>
> static void set_page_pfns(struct virtio_balloon *vb,
> @@ -131,20 +346,73 @@ static void set_page_pfns(struct virtio_balloon *vb,
> {
> unsigned int i;
>
> - /* Set balloon pfns pointing at this page.
> - * Note that the first pfn points at start of the page. */
> + /*
> + * Set balloon pfns pointing at this page.
> + * Note that the first pfn points at start of the page.
> + */
> for (i = 0; i < VIRTIO_BALLOON_PAGES_PER_PAGE; i++)
> pfns[i] = cpu_to_virtio32(vb->vdev,
> page_to_balloon_pfn(page) + i);
> }
>

Nice cleanup but pls split this out. This patch is big enough as it is.

> +static void set_page_bmap(struct virtio_balloon *vb,
> + struct list_head *pages, struct virtqueue *vq)
> +{
> + unsigned long pfn_start, pfn_stop;
> + struct page *page;
> + bool found;
> +
> + vb->pfn_min = rounddown(vb->pfn_min, BITS_PER_LONG);
> + vb->pfn_max = roundup(vb->pfn_max, BITS_PER_LONG);
> +
> + extend_page_bmap_size(vb, vb->pfn_max - vb->pfn_min + 1);

This might not do anything in particular might not cover the
given pfn range. Do we care? Why not?

> + pfn_start = vb->pfn_min;
> +
> + while (pfn_start < vb->pfn_max) {
> + pfn_stop = pfn_start + PFNS_PER_PAGE_BMAP * vb->page_bmaps;
> + pfn_stop = pfn_stop < vb->pfn_max ? pfn_stop : vb->pfn_max;
> +
> + vb->pfn_start = pfn_start;
> + clear_page_bmap(vb);
> + found = false;
> +
> + list_for_each_entry(page, pages, lru) {
> + unsigned long bmap_idx, bmap_pos, balloon_pfn;
> +
> + balloon_pfn = page_to_balloon_pfn(page);
> + if (balloon_pfn < pfn_start || balloon_pfn > pfn_stop)
> + continue;
> + bmap_idx = (balloon_pfn - pfn_start) /
> + PFNS_PER_PAGE_BMAP;
> + bmap_pos = (balloon_pfn - pfn_start) %
> + PFNS_PER_PAGE_BMAP;
> + set_bit(bmap_pos, vb->page_bmap[bmap_idx]);

Looks like this will crash if bmap_idx is out of range or
if page_bmap allocation failed.

> +
> + found = true;
> + }
> + if (found) {
> + vb->pfn_stop = pfn_stop;
> + tell_host(vb, vq);
> + }
> + pfn_start = pfn_stop;
> + }
> + free_extended_page_bmap(vb);
> +}
> +
> static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
> {
> struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
> unsigned num_allocated_pages;
> + bool chunking = virtio_has_feature(vb->vdev,
> + VIRTIO_BALLOON_F_BALLOON_CHUNKS);
>
> /* We can only do one array worth at a time. */
> - num = min(num, ARRAY_SIZE(vb->pfns));
> + if (chunking) {
> + init_page_bmap_range(vb);
> + } else {
> + /* We can only do one array worth at a time. */
> + num = min(num, ARRAY_SIZE(vb->pfns));
> + }
>
> mutex_lock(&vb->balloon_lock);
> for (vb->num_pfns = 0; vb->num_pfns < num;
> @@ -159,7 +427,10 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
> msleep(200);
> break;
> }
> - set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> + if (chunking)
> + update_page_bmap_range(vb, page);
> + else
> + set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
> if (!virtio_has_feature(vb->vdev,
> VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
> @@ -168,8 +439,13 @@ static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
>
> num_allocated_pages = vb->num_pfns;
> /* Did we get any? */
> - if (vb->num_pfns != 0)
> - tell_host(vb, vb->inflate_vq);
> + if (vb->num_pfns != 0) {
> + if (chunking)
> + set_page_bmap(vb, &vb_dev_info->pages,
> + vb->inflate_vq);
> + else
> + tell_host(vb, vb->inflate_vq);
> + }
> mutex_unlock(&vb->balloon_lock);
>
> return num_allocated_pages;
> @@ -195,6 +471,13 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
> struct page *page;
> struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
> LIST_HEAD(pages);
> + bool chunking = virtio_has_feature(vb->vdev,
> + VIRTIO_BALLOON_F_BALLOON_CHUNKS);
> + if (chunking)
> + init_page_bmap_range(vb);
> + else
> + /* We can only do one array worth at a time. */
> + num = min(num, ARRAY_SIZE(vb->pfns));
>
> /* We can only do one array worth at a time. */
> num = min(num, ARRAY_SIZE(vb->pfns));
> @@ -208,6 +491,10 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
> if (!page)
> break;
> set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> + if (chunking)
> + update_page_bmap_range(vb, page);
> + else
> + set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
> list_add(&page->lru, &pages);
> vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
> }
> @@ -218,8 +505,12 @@ static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
> * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
> * is true, we *have* to do it in this order
> */
> - if (vb->num_pfns != 0)
> - tell_host(vb, vb->deflate_vq);
> + if (vb->num_pfns != 0) {
> + if (chunking)
> + set_page_bmap(vb, &pages, vb->deflate_vq);
> + else
> + tell_host(vb, vb->deflate_vq);
> + }
> release_pages_balloon(vb, &pages);
> mutex_unlock(&vb->balloon_lock);
> return num_freed_pages;
> @@ -431,6 +722,13 @@ static int init_vqs(struct virtio_balloon *vb)
> }
>
> #ifdef CONFIG_BALLOON_COMPACTION
> +
> +static void tell_host_one_page(struct virtio_balloon *vb,
> + struct virtqueue *vq, struct page *page)
> +{
> + add_one_chunk(vb, vq, PAGE_CHUNK_TYPE_BALLOON, page_to_pfn(page), 1);

This passes 4kbytes to host which seems wrong - I think you want a full page.

> +}
> +
> /*
> * virtballoon_migratepage - perform the balloon page migration on behalf of
> * a compation thread. (called under page lock)
> @@ -454,6 +752,8 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
> {
> struct virtio_balloon *vb = container_of(vb_dev_info,
> struct virtio_balloon, vb_dev_info);
> + bool chunking = virtio_has_feature(vb->vdev,
> + VIRTIO_BALLOON_F_BALLOON_CHUNKS);
> unsigned long flags;
>
> /*
> @@ -475,16 +775,22 @@ static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
> vb_dev_info->isolated_pages--;
> __count_vm_event(BALLOON_MIGRATE);
> spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
> - vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> - set_page_pfns(vb, vb->pfns, newpage);
> - tell_host(vb, vb->inflate_vq);
> -
> + if (chunking) {
> + tell_host_one_page(vb, vb->inflate_vq, newpage);
> + } else {
> + vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> + set_page_pfns(vb, vb->pfns, newpage);
> + tell_host(vb, vb->inflate_vq);
> + }
> /* balloon's page migration 2nd step -- deflate "page" */
> balloon_page_delete(page);
> - vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> - set_page_pfns(vb, vb->pfns, page);
> - tell_host(vb, vb->deflate_vq);
> -
> + if (chunking) {
> + tell_host_one_page(vb, vb->deflate_vq, page);
> + } else {
> + vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
> + set_page_pfns(vb, vb->pfns, page);
> + tell_host(vb, vb->deflate_vq);
> + }
> mutex_unlock(&vb->balloon_lock);
>
> put_page(page); /* balloon reference */
> @@ -511,6 +817,32 @@ static struct file_system_type balloon_fs = {
>
> #endif /* CONFIG_BALLOON_COMPACTION */
>
> +static void balloon_page_chunk_init(struct virtio_balloon *vb)
> +{
> + void *buf;
> +
> + /*
> + * By default, we allocate page_bmap[0] only. More page_bmap will be
> + * allocated on demand.
> + */
> + vb->page_bmap[0] = kmalloc(PAGE_BMAP_SIZE, GFP_KERNEL);
> + buf = kmalloc(sizeof(struct virtio_balloon_page_chunk_hdr) +
> + sizeof(struct virtio_balloon_page_chunk) *
> + MAX_PAGE_CHUNKS, GFP_KERNEL);
> + if (!vb->page_bmap[0] || !buf) {
> + __virtio_clear_bit(vb->vdev, VIRTIO_BALLOON_F_BALLOON_CHUNKS);

this doesn't work as expected as features has been OK'd by then.
You want something like
validate_features that I posted. See
"virtio: allow drivers to validate features".

> + kfree(vb->page_bmap[0]);

Looks like this will double free. you want to zero them I think.

> + kfree(vb->balloon_page_chunk_hdr);
> + dev_warn(&vb->vdev->dev, "%s: failed\n", __func__);
> + } else {
> + vb->page_bmaps = 1;
> + vb->balloon_page_chunk_hdr = buf;
> + vb->balloon_page_chunk_hdr->chunks = 0;
> + vb->balloon_page_chunk = buf +
> + sizeof(struct virtio_balloon_page_chunk_hdr);
> + }
> +}
> +
> static int virtballoon_probe(struct virtio_device *vdev)
> {
> struct virtio_balloon *vb;
> @@ -533,6 +865,10 @@ static int virtballoon_probe(struct virtio_device *vdev)
> spin_lock_init(&vb->stop_update_lock);
> vb->stop_update = false;
> vb->num_pages = 0;
> +
> + if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_BALLOON_CHUNKS))
> + balloon_page_chunk_init(vb);
> +
> mutex_init(&vb->balloon_lock);
> init_waitqueue_head(&vb->acked);
> vb->vdev = vdev;
> @@ -609,6 +945,7 @@ static void virtballoon_remove(struct virtio_device *vdev)
> cancel_work_sync(&vb->update_balloon_stats_work);
>
> remove_common(vb);
> + free_page_bmap(vb);
> if (vb->vb_dev_info.inode)
> iput(vb->vb_dev_info.inode);
> kfree(vb);
> @@ -649,6 +986,7 @@ static unsigned int features[] = {
> VIRTIO_BALLOON_F_MUST_TELL_HOST,
> VIRTIO_BALLOON_F_STATS_VQ,
> VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
> + VIRTIO_BALLOON_F_BALLOON_CHUNKS,
> };
>
> static struct virtio_driver virtio_balloon_driver = {
> diff --git a/include/uapi/linux/virtio_balloon.h b/include/uapi/linux/virtio_balloon.h
> index 343d7dd..be317b7 100644
> --- a/include/uapi/linux/virtio_balloon.h
> +++ b/include/uapi/linux/virtio_balloon.h
> @@ -34,6 +34,7 @@
> #define VIRTIO_BALLOON_F_MUST_TELL_HOST 0 /* Tell before reclaiming pages */
> #define VIRTIO_BALLOON_F_STATS_VQ 1 /* Memory Stats virtqueue */
> #define VIRTIO_BALLOON_F_DEFLATE_ON_OOM 2 /* Deflate balloon on OOM */
> +#define VIRTIO_BALLOON_F_BALLOON_CHUNKS 3 /* Inflate/Deflate pages in chunks */
>
> /* Size of a PFN in the balloon interface. */
> #define VIRTIO_BALLOON_PFN_SHIFT 12
> @@ -82,4 +83,16 @@ struct virtio_balloon_stat {
> __virtio64 val;
> } __attribute__((packed));
>
> +struct virtio_balloon_page_chunk_hdr {
> + /* Number of chunks in the payload */
> + __le32 chunks;

You want to make this __le64 to align everything to 64 bit.

> +};
> +
> +#define VIRTIO_BALLOON_CHUNK_BASE_SHIFT 12
> +#define VIRTIO_BALLOON_CHUNK_SIZE_SHIFT 12
> +struct virtio_balloon_page_chunk {

so rename this virtio_balloon_page_chunk_entry

> + __le64 base;
> + __le64 size;
> +};
> +

And then:

struct virtio_balloon_page_chunk {
struct virtio_balloon_page_chunk_hdr hdr;
struct virtio_balloon_page_chunk_entry entries[];
};



> #endif /* _LINUX_VIRTIO_BALLOON_H */
> --
> 2.7.4

\
 
 \ /
  Last update: 2017-04-13 18:35    [W:0.209 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site