lkml.org 
[lkml]   [2017]   [Apr]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V4 2/9] PM / Domains: Use OPP tables for power-domains
Date


On 13/04/17 07:03, Viresh Kumar wrote:
> On 12-04-17, 17:58, Sudeep Holla wrote:
>>
>>
>> On 20/03/17 09:32, Viresh Kumar wrote:
>>> The OPP table bindings contains all the necessary fields to support
>>> power-domains now. Update the power-domain bindings to allow
>>> "operating-points-v2" to be present within the power-domain node.
>>>
>>> Also allow consumer devices, that don't use OPP tables, to specify the
>>> parent power-domain's performance level using the
>>> "domain-performance-state" property.
>>>
>>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>> ---
>>> .../devicetree/bindings/power/power_domain.txt | 42 ++++++++++++++++++++++
>>> 1 file changed, 42 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
>>> index 723e1ad937da..5db112fa5d7c 100644
>>> --- a/Documentation/devicetree/bindings/power/power_domain.txt
>>> +++ b/Documentation/devicetree/bindings/power/power_domain.txt
>>> @@ -38,6 +38,9 @@ phandle arguments (so called PM domain specifiers) of length specified by the
>>> domain's idle states. In the absence of this property, the domain would be
>>> considered as capable of being powered-on or powered-off.
>>>
>>> +- operating-points-v2 : This describes the performance states of a PM domain.
>>> + Refer to ../opp/opp.txt for more information.
>>> +
>>> Example:
>>>
>>> power: power-controller@12340000 {
>>> @@ -118,4 +121,43 @@ The node above defines a typical PM domain consumer device, which is located
>>> inside a PM domain with index 0 of a power controller represented by a node
>>> with the label "power".
>>>
>>> +Optional properties:
>>> +- domain-performance-state: A positive integer value representing the minimum
>>> + power-domain performance level required by the consumer device. The integer
>>> + value '0' represents the lowest performance level and the higher values
>>> + represent higher performance levels. The value of "domain-performance-state"
>>> + field should match the "domain-performance-state" field of one of the OPP
>>> + nodes in the parent power-domain's OPP table.
>>> +
>>> +
>>> +
>>> +Example:
>>> +
>>> + domain_opp_table: opp_table {
>>> + compatible = "operating-points-v2";
>>> +
>>> + opp@1 {
>>> + domain-performance-state = <1>;
>>> + opp-microvolt = <975000 970000 985000>;
>>> + };
>>> + opp@2 {
>>> + domain-performance-state = <2>;
>>> + opp-microvolt = <1075000 1000000 1085000>;
>>> + };
>>> + };
>>> +
>>> + parent: power-controller@12340000 {
>>> + compatible = "foo,power-controller";
>>> + reg = <0x12340000 0x1000>;
>>> + #power-domain-cells = <0>;
>>> + operating-points-v2 = <&domain_opp_table>;
>>
>> As mentioned in the other email, it would be good to consider
>> scalability with multiple power domains in a PM domain provider.
>> i.e case of #power-domain-cells = <1> or more
>
> Yeah, but that isn't supported for devices today. So no point
> considering that today.
>

Do you mean we don't support power controllers with multiple power
domains ? If yes, we do support #power-domain-cells=<1 or more> clearly
from the binding and this change simple doesn't scale with such power
controllers/power-domain providers.

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2017-04-13 15:46    [W:0.454 / U:0.440 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site