lkml.org 
[lkml]   [2017]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] [media] imx: csi: retain current field order and colorimetry setting as default
Date


On 04/06/2017 08:25 AM, Philipp Zabel wrote:
> On Thu, 2017-04-06 at 16:10 +0100, Russell King - ARM Linux wrote:
>> On Thu, Apr 06, 2017 at 05:01:52PM +0200, Philipp Zabel wrote:
>>> On Thu, 2017-04-06 at 15:05 +0100, Russell King - ARM Linux wrote:
>>>> On Thu, Apr 06, 2017 at 03:55:29PM +0200, Philipp Zabel wrote:
>>>>> +
>>>>> + /* Retain current field setting as default */
>>>>> + if (sdformat->format.field == V4L2_FIELD_ANY)
>>>>> + sdformat->format.field = fmt->field;
>>>>> +
>>>>> + /* Retain current colorspace setting as default */
>>>>> + if (sdformat->format.colorspace == V4L2_COLORSPACE_DEFAULT) {
>>>>> + sdformat->format.colorspace = fmt->colorspace;
>>>>> + if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT)
>>>>> + sdformat->format.xfer_func = fmt->xfer_func;
>>>>> + if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
>>>>> + sdformat->format.ycbcr_enc = fmt->ycbcr_enc;
>>>>> + if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT)
>>>>> + sdformat->format.quantization = fmt->quantization;
>>>>> + } else {
>>>>> + if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT) {
>>>>> + sdformat->format.xfer_func =
>>>>> + V4L2_MAP_XFER_FUNC_DEFAULT(
>>>>> + sdformat->format.colorspace);
>>>>> + }
>>>>> + if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) {
>>>>> + sdformat->format.ycbcr_enc =
>>>>> + V4L2_MAP_YCBCR_ENC_DEFAULT(
>>>>> + sdformat->format.colorspace);
>>>>> + }
>>>>> + if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT) {
>>>>> + sdformat->format.quantization =
>>>>> + V4L2_MAP_QUANTIZATION_DEFAULT(
>>>>> + cc->cs != IPUV3_COLORSPACE_YUV,
>>>>> + sdformat->format.colorspace,
>>>>> + sdformat->format.ycbcr_enc);
>>>>> + }
>>>>> + }
>>>>
>>>> Would it make sense for this to be a helper function?
>>>
>>> Quite possible, the next subdev that has to set frame_interval on both
>>> pads manually because its upstream source pad doesn't suport
>>> frame_interval might want to do the same.
>>
>> Hmm. I'm not sure I agree with this approach. If a subdev hardware
>> does not support any modification of the colourspace or field, then
>> it should not be modifyable at the source pad - it should retain the
>> propagated settings from the sink pad.
>
> This new code is only relevant for the CSI_SINK_PAD.
>
>> I thought I had already sent a patch doing exactly that.
>
> Yes. Right above the modification there is a call to csi_try_fmt which
> will already fix up sdformat->format for the source pads. So for the
> CSI_SRC_PAD_DIRECT and CSI_SRC_PAD_IDMAC this should amount to a no-op.
>
> If might be better to move this into a separate function and only call
> it if sdformat->pad == CSI_SINK_PAD.

I've done this, I will follow with the new patch. Philipp, let me know
if this looks ok to you and I will add your sign-off.

Steve


\
 
 \ /
  Last update: 2017-04-13 02:34    [W:0.215 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site