lkml.org 
[lkml]   [2017]   [Apr]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] serial: enable serdev support
Date
Enable serdev support by using the new device-registration helpers.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/tty/serial/serial_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3fe56894974a..9f5eb0ced359 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2785,7 +2785,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this port's parameters.
*/
- tty_dev = tty_port_register_device_attr(port, drv->tty_driver,
+ tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
uport->line, uport->dev, port, uport->tty_groups);
if (likely(!IS_ERR(tty_dev))) {
device_set_wakeup_capable(tty_dev, 1);
@@ -2848,7 +2848,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
/*
* Remove the devices from the tty layer
*/
- tty_unregister_device(drv->tty_driver, uport->line);
+ tty_port_unregister_device(port, drv->tty_driver, uport->line);

tty = tty_port_tty_get(port);
if (tty) {
--
2.12.2
\
 
 \ /
  Last update: 2017-04-11 19:08    [W:0.174 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site