lkml.org 
[lkml]   [2017]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [patch v2] mm, vmstat: print non-populated zones in zoneinfo
On Fri 03-03-17 14:53:07, David Rientjes wrote:
> Initscripts can use the information (protection levels) from
> /proc/zoneinfo to configure vm.lowmem_reserve_ratio at boot.
>
> vm.lowmem_reserve_ratio is an array of ratios for each configured zone on
> the system. If a zone is not populated on an arch, /proc/zoneinfo
> suppresses its output.
>
> This results in there not being a 1:1 mapping between the set of zones
> emitted by /proc/zoneinfo and the zones configured by
> vm.lowmem_reserve_ratio.
>
> This patch shows statistics for non-populated zones in /proc/zoneinfo.
> The zones exist and hold a spot in the vm.lowmem_reserve_ratio array.
> Without this patch, it is not possible to determine which index in the
> array controls which zone if one or more zones on the system are not
> populated.
>
> Remaining users of walk_zones_in_node() are unchanged. Files such as
> /proc/pagetypeinfo require certain zone data to be initialized properly
> for display, which is not done for unpopulated zones.

Does it really make sense to print any counters of that zone though?
Your follow up patch just suggests that we don't want some but what
about others?

I can see how skipping empty zones completely can be clumsy but wouldn't
it be sufficient to just provide

Node $NUM, zone $NAME
(unpopulated)

instead?

>
> Signed-off-by: David Rientjes <rientjes@google.com>
> ---
> v2: - s/bool populated/b assert_populated/ per Anshuman
> - add comment to zoneinfo_show() to describe why we care
>
> mm/vmstat.c | 27 +++++++++++++++++----------
> 1 file changed, 17 insertions(+), 10 deletions(-)
>
> diff --git a/mm/vmstat.c b/mm/vmstat.c
> --- a/mm/vmstat.c
> +++ b/mm/vmstat.c
> @@ -1121,8 +1121,12 @@ static void frag_stop(struct seq_file *m, void *arg)
> {
> }
>
> -/* Walk all the zones in a node and print using a callback */
> +/*
> + * Walk zones in a node and print using a callback.
> + * If @assert_populated is true, only use callback for zones that are populated.
> + */
> static void walk_zones_in_node(struct seq_file *m, pg_data_t *pgdat,
> + bool assert_populated,
> void (*print)(struct seq_file *m, pg_data_t *, struct zone *))
> {
> struct zone *zone;
> @@ -1130,7 +1134,7 @@ static void walk_zones_in_node(struct seq_file *m, pg_data_t *pgdat,
> unsigned long flags;
>
> for (zone = node_zones; zone - node_zones < MAX_NR_ZONES; ++zone) {
> - if (!populated_zone(zone))
> + if (assert_populated && !populated_zone(zone))
> continue;
>
> spin_lock_irqsave(&zone->lock, flags);
> @@ -1158,7 +1162,7 @@ static void frag_show_print(struct seq_file *m, pg_data_t *pgdat,
> static int frag_show(struct seq_file *m, void *arg)
> {
> pg_data_t *pgdat = (pg_data_t *)arg;
> - walk_zones_in_node(m, pgdat, frag_show_print);
> + walk_zones_in_node(m, pgdat, true, frag_show_print);
> return 0;
> }
>
> @@ -1199,7 +1203,7 @@ static int pagetypeinfo_showfree(struct seq_file *m, void *arg)
> seq_printf(m, "%6d ", order);
> seq_putc(m, '\n');
>
> - walk_zones_in_node(m, pgdat, pagetypeinfo_showfree_print);
> + walk_zones_in_node(m, pgdat, true, pagetypeinfo_showfree_print);
>
> return 0;
> }
> @@ -1251,7 +1255,7 @@ static int pagetypeinfo_showblockcount(struct seq_file *m, void *arg)
> for (mtype = 0; mtype < MIGRATE_TYPES; mtype++)
> seq_printf(m, "%12s ", migratetype_names[mtype]);
> seq_putc(m, '\n');
> - walk_zones_in_node(m, pgdat, pagetypeinfo_showblockcount_print);
> + walk_zones_in_node(m, pgdat, true, pagetypeinfo_showblockcount_print);
>
> return 0;
> }
> @@ -1277,7 +1281,7 @@ static void pagetypeinfo_showmixedcount(struct seq_file *m, pg_data_t *pgdat)
> seq_printf(m, "%12s ", migratetype_names[mtype]);
> seq_putc(m, '\n');
>
> - walk_zones_in_node(m, pgdat, pagetypeinfo_showmixedcount_print);
> + walk_zones_in_node(m, pgdat, true, pagetypeinfo_showmixedcount_print);
> #endif /* CONFIG_PAGE_OWNER */
> }
>
> @@ -1429,12 +1433,15 @@ static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
> }
>
> /*
> - * Output information about zones in @pgdat.
> + * Output information about zones in @pgdat. All zones are printed regardless
> + * of whether they are populated or not: lowmem_reserve_ratio operates on the
> + * set of all zones and userspace would not be aware of such zones if they are
> + * suppressed here (zoneinfo displays the effect of lowmem_reserve_ratio).
> */
> static int zoneinfo_show(struct seq_file *m, void *arg)
> {
> pg_data_t *pgdat = (pg_data_t *)arg;
> - walk_zones_in_node(m, pgdat, zoneinfo_show_print);
> + walk_zones_in_node(m, pgdat, false, zoneinfo_show_print);
> return 0;
> }
>
> @@ -1853,7 +1860,7 @@ static int unusable_show(struct seq_file *m, void *arg)
> if (!node_state(pgdat->node_id, N_MEMORY))
> return 0;
>
> - walk_zones_in_node(m, pgdat, unusable_show_print);
> + walk_zones_in_node(m, pgdat, true, unusable_show_print);
>
> return 0;
> }
> @@ -1905,7 +1912,7 @@ static int extfrag_show(struct seq_file *m, void *arg)
> {
> pg_data_t *pgdat = (pg_data_t *)arg;
>
> - walk_zones_in_node(m, pgdat, extfrag_show_print);
> + walk_zones_in_node(m, pgdat, true, extfrag_show_print);
>
> return 0;
> }
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

--
Michal Hocko
SUSE Labs

\
 
 \ /
  Last update: 2017-03-08 15:54    [W:3.078 / U:1.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site