lkml.org 
[lkml]   [2017]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/7] arm: dts: bcm283x: switch from &sdhci to &sdhost
Date
sdcard access with the sdhost controller is faster.

Read access (dd with 64k blocks on rpi2):
CONFIG_MMC_SDHCI_IPROC: 11-12 MB/s
CONFIG_MMC_BCM2835: 19-20 MB/s

Differences on write access are pretty much in the noise.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
---
arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 8b95832..e36c392 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -65,13 +65,13 @@
&sdhci {
pinctrl-names = "default";
pinctrl-0 = <&emmc_gpio48>;
- status = "okay";
bus-width = <4>;
};

&sdhost {
pinctrl-names = "default";
pinctrl-0 = <&sdhost_gpio48>;
+ status = "okay";
bus-width = <4>;
};

--
1.8.3.1
\
 
 \ /
  Last update: 2017-03-08 10:23    [W:0.321 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site