lkml.org 
[lkml]   [2017]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dmaengine: rcar-dmac: enable descriptor mode on 40bit
Date

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

SYS-DMAC can use 40bit address transfer, and it supports Descriptor
Mode too. Current SYS-DMAC driver disables Descriptor Mode if it was
40bit address today. But it can use Descriptor Mode with 40bit if
transfer Source/Destination address are located in same 4GiB region
in the 40 bit address space.
This patch enables it if all condition was clear

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
drivers/dma/sh/rcar-dmac.c | 65 +++++++++++++++++++++++++---------------------
1 file changed, 36 insertions(+), 29 deletions(-)

diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
index 48b22d5..2ebd2be 100644
--- a/drivers/dma/sh/rcar-dmac.c
+++ b/drivers/dma/sh/rcar-dmac.c
@@ -344,13 +344,19 @@ static void rcar_dmac_chan_start_xfer(struct rcar_dmac_chan *chan)
rcar_dmac_chan_write(chan, RCAR_DMARS, chan->mid_rid);

if (desc->hwdescs.use) {
- struct rcar_dmac_xfer_chunk *chunk;
+ struct rcar_dmac_xfer_chunk *chunk =
+ list_first_entry(&desc->chunks,
+ struct rcar_dmac_xfer_chunk, node);

dev_dbg(chan->chan.device->dev,
"chan%u: queue desc %p: %u@%pad\n",
chan->index, desc, desc->nchunks, &desc->hwdescs.dma);

#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ rcar_dmac_chan_write(chan, RCAR_DMAFIXSAR,
+ chunk->src_addr >> 32);
+ rcar_dmac_chan_write(chan, RCAR_DMAFIXDAR,
+ chunk->dst_addr >> 32);
rcar_dmac_chan_write(chan, RCAR_DMAFIXDPBASE,
desc->hwdescs.dma >> 32);
#endif
@@ -368,8 +374,6 @@ static void rcar_dmac_chan_start_xfer(struct rcar_dmac_chan *chan)
* should. Initialize it manually with the destination address
* of the first chunk.
*/
- chunk = list_first_entry(&desc->chunks,
- struct rcar_dmac_xfer_chunk, node);
rcar_dmac_chan_write(chan, RCAR_DMADAR,
chunk->dst_addr & 0xffffffff);

@@ -855,8 +859,12 @@ static void rcar_dmac_chan_configure_desc(struct rcar_dmac_chan *chan,
unsigned int nchunks = 0;
unsigned int max_chunk_size;
unsigned int full_size = 0;
- bool highmem = false;
+ bool cross_boundary = false;
unsigned int i;
+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ u32 high_src_addr = 0;
+ u32 high_dst_addr = 0;
+#endif

desc = rcar_dmac_desc_get(chan);
if (!desc)
@@ -885,25 +893,6 @@ static void rcar_dmac_chan_configure_desc(struct rcar_dmac_chan *chan,
while (len) {
unsigned int size = min(len, max_chunk_size);

-#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
- /*
- * Prevent individual transfers from crossing 4GB
- * boundaries.
- */
- if (dev_addr >> 32 != (dev_addr + size - 1) >> 32)
- size = ALIGN(dev_addr, 1ULL << 32) - dev_addr;
- if (mem_addr >> 32 != (mem_addr + size - 1) >> 32)
- size = ALIGN(mem_addr, 1ULL << 32) - mem_addr;
-
- /*
- * Check if either of the source or destination address
- * can't be expressed in 32 bits. If so we can't use
- * hardware descriptor lists.
- */
- if (dev_addr >> 32 || mem_addr >> 32)
- highmem = true;
-#endif
-
chunk = rcar_dmac_xfer_chunk_get(chan);
if (!chunk) {
rcar_dmac_desc_put(chan, desc);
@@ -918,6 +907,26 @@ static void rcar_dmac_chan_configure_desc(struct rcar_dmac_chan *chan,
chunk->dst_addr = dev_addr;
}

+#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
+ if (i == 0) {
+ high_src_addr = chunk->src_addr >> 32;
+ high_dst_addr = chunk->dst_addr >> 32;
+ }
+
+ /*
+ * Prevent individual transfers from crossing 4GB
+ * boundaries.
+ */
+ if (dev_addr >> 32 != (dev_addr + size - 1) >> 32)
+ size = ALIGN(dev_addr, 1ULL << 32) - dev_addr;
+ if (mem_addr >> 32 != (mem_addr + size - 1) >> 32)
+ size = ALIGN(mem_addr, 1ULL << 32) - mem_addr;
+
+ if ((chunk->src_addr >> 32 != high_src_addr) ||
+ (chunk->dst_addr >> 32 != high_dst_addr))
+ cross_boundary = true;
+#endif
+
chunk->size = size;

dev_dbg(chan->chan.device->dev,
@@ -943,13 +952,11 @@ static void rcar_dmac_chan_configure_desc(struct rcar_dmac_chan *chan,
* Use hardware descriptor lists if possible when more than one chunk
* needs to be transferred (otherwise they don't make much sense).
*
- * The highmem check currently covers the whole transfer. As an
- * optimization we could use descriptor lists for consecutive lowmem
- * chunks and direct manual mode for highmem chunks. Whether the
- * performance improvement would be significant enough compared to the
- * additional complexity remains to be investigated.
+ * Source/Destination address should be located in same 4GiB region
+ * in the 40bit address space when it uses Hardware descriptor,
+ * and cross_boundary is checking it.
*/
- desc->hwdescs.use = !highmem && nchunks > 1;
+ desc->hwdescs.use = !cross_boundary && nchunks > 1;
if (desc->hwdescs.use) {
if (rcar_dmac_fill_hwdesc(chan, desc) < 0)
desc->hwdescs.use = false;
--
1.9.1
\
 
 \ /
  Last update: 2017-03-07 02:12    [W:0.095 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site