lkml.org 
[lkml]   [2017]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] mfd: wm831x: Add device tree binding document
Date
Add a device tree binding document for the wm831x series of PMICs.
Currently only support for the registering the device and the GPIOs are
actually implemented in the driver.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

Changes since v2:
- Flesh the binding some more with some additional features of the device,
although these are not yet implemented in the code.

Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt

diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt
new file mode 100644
index 0000000..680ac18
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/wm831x.txt
@@ -0,0 +1,81 @@
+Cirrus Logic/Wolfson Microelectronics wm831x PMICs
+
+System PMICs with a wide range of additional features.
+
+Required properties:
+
+ - compatible : One of the following chip-specific strings:
+ "wlf,wm8310"
+ "wlf,wm8311"
+ "wlf,wm8312"
+ "wlf,wm8320"
+ "wlf,wm8321"
+ "wlf,wm8325"
+ "wlf,wm8326"
+
+ - reg : I2C slave address when connected using I2C, chip select number
+ when using SPI.
+
+ - gpio-controller : Indicates this device is a GPIO controller.
+ - #gpio-cells : Must be 2. The first cell is the pin number and the
+ second cell is used to specify optional parameters (currently unused).
+
+ - interrupts : The interrupt line the /IRQ signal for the device is
+ connected to.
+ - interrupt-parent : The parent interrupt controller.
+
+ - interrupt-controller : wm831x devices contain interrupt controllers and
+ may provide interrupt services to other devices.
+ - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the
+ second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Optional sub-nodes:
+ - regulators : Contains sub-nodes for each of the regulators supplied by
+ the device. The regulators are bound using their names listed below:
+
+ dcdc1 : DCDC1
+ dcdc2 : DCDC2
+ dcdc3 : DCDC3
+ dcdc4 : DCDC3
+ isink1 : ISINK1
+ isink2 : ISINK2
+ ldo1 : LDO1
+ ldo2 : LDO2
+ ldo3 : LDO3
+ ldo4 : LDO4
+ ldo5 : LDO5
+ ldo7 : LDO7
+ ldo11 : LDO11
+
+ The bindings details of each regulator can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+wm8310: pmic@36 {
+ compatible = "wlf,wm8310";
+ reg = <0x36>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupts = <347>;
+ interrupt-parent = <&gic>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ dcdc1: dcdc1 {
+ regulator-name = "DCDC1";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ ldo1: ldo1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1700000>;
+ };
+ };
+};
diff --git a/MAINTAINERS b/MAINTAINERS
index 2d8ca28..48fdc82 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13363,6 +13363,7 @@ F: Documentation/hwmon/wm83??
F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt
F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
F: Documentation/devicetree/bindings/mfd/arizona.txt
+F: Documentation/devicetree/bindings/mfd/wm831x.txt
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
--
2.1.4
\
 
 \ /
  Last update: 2017-03-06 17:47    [W:0.123 / U:0.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site