lkml.org 
[lkml]   [2017]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [bdi_unregister] 165a5e22fa INFO: task swapper:1 blocked for more than 120 seconds.
On Mon 06-03-17 06:35:21, James Bottomley wrote:
> On Mon, 2017-03-06 at 13:01 +0100, Jan Kara wrote:
> > On Mon 06-03-17 11:27:33, Jan Kara wrote:
> > > Hi,
> > >
> > > On Sun 05-03-17 10:21:11, Wu Fengguang wrote:
> > > > FYI next-20170303 is good while mainline is bad with this error.
> > > > The attached reproduce-* may help reproduce the issue.
> > >
> > > Thanks for report! So from the stacktrace we are in the path
> > > testing removal of a device immediately after it has been probed
> > > and for some reason bdi_unregister() hangs - likely waiting for
> > > cgroup-writeback references to drop. Given how early this happens
> > > my guess is we fail to initialize something but for now I don't see
> > > how my patch could make a difference. I'm trying to reproduce this
> > > to be able to debug more...
> >
> > OK, so after some debugging I think this is yet another problem in
> > SCSI initialization / destruction code which my patch only makes
> > visible (added relevant maintainers).
> >
> > I can reproduce the problem reliably with enabling:
> >
> > CONFIG_DEBUG_TEST_DRIVER_REMOVE=y
> > CONFIG_SCSI_DEBUG=m
> > CONFIG_BLK_CGROUP=y
> > CONFIG_MEMCG=y
> > (and thus CONFIG_CGROUP_WRITEBACK=y)
> >
> > then 'modprobe scsi_debug' is all it takes to reproduce hang.
> > Relevant kernel messages with some of my debugging added (attached is
> > a patch that adds those debug messages):
>
> This looks to be precisely the same problem Dan Williams was debugging
> for us.
>
> > [ 58.721765] scsi host0: scsi_debug: version 1.86 [20160430]
> > [ 58.721765] dev_size_mb=8, opts=0x0, submit_queues=1,
> > statistics=0
> > [ 58.728946] CGWB init ffff88007fbb2000
> > [ 58.730095] Created sdev ffff880078e1a000
> > [ 58.731611] scsi 0:0:0:0: Direct-Access Linux scsi_debug
> > 0186 PQ : 0 ANSI: 7
> > [ 58.782246] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39
> > MB/8.00 MiB)
> > [ 58.789687] sd 0:0:0:0: [sda] Write Protect is off
> > [ 58.791140] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
> > [ 58.800879] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> > enabled, supports DPO and FUA
> > [ 58.893738] sd 0:0:0:0: [sda] Attached SCSI disk
> > [ 58.896808] Unreg1
> > [ 58.897960] Unreg2
> > [ 58.898637] Unreg3
> > [ 58.899100] CGWB ffff88007fbb2000 usage_cnt: 0
> > [ 58.900004] Unreg4
> > [ 58.904976] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>
> OK, can you put a WARN_ON trace in sd_shutdown and tell us where this
> is coming from. For the device to be reused after this we have to be
> calling sd_shutdown() without going into SDEV_DEL.

Sure. The call trace is:

[ 41.919244] ------------[ cut here ]------------
[ 41.919263] WARNING: CPU: 4 PID: 2335 at drivers/scsi/sd.c:3332 sd_shutdown+0x2f/0x100
[ 41.919268] Modules linked in: scsi_debug(+) netconsole loop btrfs raid6_pq zlib_deflate lzo_compress xor
[ 41.919319] CPU: 4 PID: 2335 Comm: modprobe Not tainted 4.11.0-rc1-xen+ #49
[ 41.919325] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 41.919331] Call Trace:
[ 41.919343] dump_stack+0x8e/0xf0
[ 41.919354] __warn+0x116/0x120
[ 41.919361] warn_slowpath_null+0x1d/0x20
[ 41.919368] sd_shutdown+0x2f/0x100
[ 41.919374] sd_remove+0x70/0xd0

*** Here is the unexpected step I guess...

[ 41.919383] driver_probe_device+0xe0/0x4c0
[ 41.919395] ? kobject_uevent_env+0x1bc/0x660
[ 41.919403] __device_attach_driver+0xfa/0x120
[ 41.919410] ? __driver_attach+0x110/0x110
[ 41.919417] bus_for_each_drv+0x68/0x90
[ 41.919424] __device_attach+0xb2/0x110
[ 41.919432] device_initial_probe+0x13/0x20
[ 41.919439] bus_probe_device+0xa8/0xc0
[ 41.919446] device_add+0x297/0x600
[ 41.919453] ? call_rcu_bh+0x20/0x20
[ 41.919463] ? mutex_unlock+0x12/0x20
[ 41.919473] scsi_sysfs_add_sdev+0x69/0x210
[ 41.919480] scsi_probe_and_add_lun+0xcfd/0xd10
[ 41.919489] ? find_next_zero_bit+0x10/0x20
[ 41.919496] __scsi_scan_target+0xd2/0x4c0
[ 41.919506] ? proc_register+0x41/0x130
[ 41.919512] ? proc_register+0x11c/0x130
[ 41.919520] ? trace_hardirqs_on+0xd/0x10
[ 41.919527] ? _raw_spin_unlock_irq+0x30/0x50
[ 41.919534] scsi_scan_channel+0x5f/0xa0
[ 41.919541] scsi_scan_host_selected+0xb9/0x120
[ 41.919549] do_scsi_scan_host+0x81/0x90
[ 41.919555] scsi_scan_host+0x17a/0x1b0
[ 41.919568] ? scsi_add_host_with_dma+0x302/0x310
[ 41.919593] sdebug_driver_probe+0x204/0x320 [scsi_debug]
[ 41.919601] ? driver_sysfs_add+0x90/0xb0
[ 41.919608] driver_probe_device+0xb3/0x4c0
[ 41.919615] ? kobject_uevent_env+0x1bc/0x660
[ 41.919623] __device_attach_driver+0xfa/0x120
[ 41.919630] ? __driver_attach+0x110/0x110
[ 41.919636] bus_for_each_drv+0x68/0x90
[ 41.919643] __device_attach+0xb2/0x110
[ 41.919651] device_initial_probe+0x13/0x20
[ 41.919658] bus_probe_device+0xa8/0xc0
[ 41.919664] device_add+0x297/0x600
[ 41.919671] ? dev_set_name+0x41/0x50
[ 41.919681] device_register+0x1e/0x30
[ 41.919696] sdebug_add_adapter+0xff/0x1d0 [scsi_debug]
[ 41.919703] ? kobject_uevent+0xb/0x10
[ 41.919709] ? 0xffffffffa0172000
[ 41.919723] scsi_debug_init+0x40e/0x1000 [scsi_debug]
[ 41.919730] ? 0xffffffffa0172000
[ 41.919739] do_one_initcall+0xbe/0x200

Honza

--
Jan Kara <jack@suse.com>
SUSE Labs, CR

\
 
 \ /
  Last update: 2017-03-06 16:26    [W:0.107 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site