lkml.org 
[lkml]   [2017]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 4/4] mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan
Date
Hi Ralph,

On lun., mars 27 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:

Here again the title should start with ARM: dts: armada-xp.

As for the other patch if there is no need for a v5 I will fix it while
appliig it.

Thanks,

Gregory

> From: Andrew Lunn <andrew@lunn.ch>
>
> The mvebu GPIO driver can also perform PWM on some pins. Use the pwm-fan
> driver to control the fan of the WRT1900AC, giving us finer grained control
> over its speed and hence noise.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> URL: https://patchwork.ozlabs.org/patch/427291/
> [Ralph Sennhauser: drop flags paramter from pwms, no longer used]
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>
> ---
> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> index 9efcf59..6d705f5 100644
> --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> @@ -308,13 +308,11 @@
> };
> };
>
> - gpio_fan {
> + pwm_fan {
> /* SUNON HA4010V4-0000-C99 */
> - compatible = "gpio-fan";
> - gpios = <&gpio0 24 0>;
>
> - gpio-fan,speed-map = <0 0
> - 4500 1>;
> + compatible = "pwm-fan";
> + pwms = <&gpio0 24 4000>;
> };
>
> dsa {
> --
> 2.10.2
>

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2017-03-30 18:03    [W:0.065 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site