lkml.org 
[lkml]   [2017]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/8] NFC: nfcmrvl: allow gpio 0 for reset signalling
Date
Allow gpio 0 to be used for reset signalling, and instead use negative
errnos to disable the reset functionality.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/nfc/nfcmrvl/main.c | 9 ++++-----
include/linux/platform_data/nfcmrvl.h | 2 +-
2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index a446590a71ca..838627fa82ee 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -123,12 +123,12 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,

memcpy(&priv->config, pdata, sizeof(*pdata));

- if (priv->config.reset_n_io) {
+ if (gpio_is_valid(priv->config.reset_n_io)) {
rc = gpio_request_one(priv->config.reset_n_io,
GPIOF_OUT_INIT_LOW,
"nfcmrvl_reset_n");
if (rc < 0) {
- priv->config.reset_n_io = 0;
+ priv->config.reset_n_io = -EINVAL;
nfc_err(dev, "failed to request reset_n io\n");
}
}
@@ -183,7 +183,7 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
error_free_dev:
nci_free_device(priv->ndev);
error_free_gpio:
- if (priv->config.reset_n_io)
+ if (gpio_is_valid(priv->config.reset_n_io))
gpio_free(priv->config.reset_n_io);
kfree(priv);
return ERR_PTR(rc);
@@ -199,7 +199,7 @@ void nfcmrvl_nci_unregister_dev(struct nfcmrvl_private *priv)

nfcmrvl_fw_dnld_deinit(priv);

- if (priv->config.reset_n_io)
+ if (gpio_is_valid(priv->config.reset_n_io))
gpio_free(priv->config.reset_n_io);

nci_unregister_device(ndev);
@@ -267,7 +267,6 @@ int nfcmrvl_parse_dt(struct device_node *node,
reset_n_io = of_get_named_gpio(node, "reset-n-io", 0);
if (reset_n_io < 0) {
pr_info("no reset-n-io config\n");
- reset_n_io = 0;
} else if (!gpio_is_valid(reset_n_io)) {
pr_err("invalid reset-n-io GPIO\n");
return reset_n_io;
diff --git a/include/linux/platform_data/nfcmrvl.h b/include/linux/platform_data/nfcmrvl.h
index a6f9d633f5be..9e75ac8d19be 100644
--- a/include/linux/platform_data/nfcmrvl.h
+++ b/include/linux/platform_data/nfcmrvl.h
@@ -23,7 +23,7 @@ struct nfcmrvl_platform_data {
*/

/* GPIO that is wired to RESET_N signal */
- unsigned int reset_n_io;
+ int reset_n_io;
/* Tell if transport is muxed in HCI one */
unsigned int hci_muxed;

--
2.12.2
\
 
 \ /
  Last update: 2017-03-30 12:23    [W:0.106 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site