Messages in this thread | | | Subject | Re: [PATCH 0/2] mtd: spi-nor: add stm32 qspi driver | From | Ludovic BARRE <> | Date | Thu, 30 Mar 2017 09:31:15 +0200 |
| |
hi Cyrille
I see your patch series
[PATCH v5 0/6] mtd: spi-nor: parse SFDP tables to setup (Q)SPI memories
No problem, I rebase my V2 onto your patch
BR Ludo
On 03/29/2017 06:51 PM, Cyrille Pitchen wrote: > Hi Ludovic, > > Le 27/03/2017 à 14:54, Ludovic Barre a écrit : >> From: Ludovic Barre <ludovic.barre@st.com> >> >> This patch set adds a SPI-NOR driver for stm32 QSPI controller. >> It is a specialized SPI interface for serial Flash devices. >> It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories. >> >> It can operate in any of the following modes: >> -indirect mode: all the operations are performed using the quadspi >> registers >> -read memory-mapped mode: the external Flash memory is mapped to the >> microcontroller address space and is seen by the system as if it was >> an internal memory >> >> Ludovic Barre (2): >> dt-bindings: Document the STM32 QSPI bindings >> mtd: spi-nor: add driver for STM32 quad spi flash controller >> >> .../devicetree/bindings/mtd/stm32-quadspi.txt | 45 ++ >> drivers/mtd/spi-nor/Kconfig | 7 + >> drivers/mtd/spi-nor/Makefile | 1 + >> drivers/mtd/spi-nor/stm32-quadspi.c | 679 +++++++++++++++++++++ >> 4 files changed, 732 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt >> create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c >> > Just a small word to warn you that I'm likely to ask you to rebase this > series onto the patch "mtd: spi-nor: introduce more SPI protocols and > the Dual Transfer Mode". Indeed, I need to synchronize with Marek first > but I plan to merge this patch within few days. > > > Best regards, > > Cyrille
| |