lkml.org 
[lkml]   [2017]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/4] tty/serial: sh-sci: remove uneeded IS_ERR_OR_NULL calls
Hi Richard,

On Fri, Mar 3, 2017 at 3:22 PM, Richard Genoud <richard.genoud@gmail.com> wrote:
> Since commit 1d267ea6539f ("serial: mctrl-gpio: simplify init routine"),
> the mctrl_gpio_to_gpiod() function can't return an error anymore.
> So, just testing for a NULL pointer is ok.

If CONFIG_GPIOLIB=n, mctrl_gpio_to_gpiod() always returns ERR_PTR(-ENOSYS).
That case should be handled correctly, too.

Perhaps mctrl_gpio_to_gpiod() should always return NULL if !CONFIG_GPIOLIB?

This may apply to the other 2 patches, too:
[PATCH 2/4] tty/serial: atmel: remove uneeded IS_ERR_OR_NULL calls
[PATCH 3/4] tty/serial: mxs-auart: remove uneeded IS_ERR_OR_NULL calls

> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
> ---
> drivers/tty/serial/sh-sci.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
> index 9a47cc4f16a2..36fde6f24040 100644
> --- a/drivers/tty/serial/sh-sci.c
> +++ b/drivers/tty/serial/sh-sci.c
> @@ -1934,12 +1934,12 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
> if (s->autorts) {
> if (sci_get_cts(port))
> mctrl |= TIOCM_CTS;
> - } else if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS))) {
> + } else if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_CTS)) {
> mctrl |= TIOCM_CTS;
> }
> - if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR)))
> + if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DSR))
> mctrl |= TIOCM_DSR;
> - if (IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD)))
> + if (!mctrl_gpio_to_gpiod(gpios, UART_GPIO_DCD))
> mctrl |= TIOCM_CAR;
>
> return mctrl;
> @@ -3072,10 +3072,8 @@ static int sci_probe_single(struct platform_device *dev,
> return PTR_ERR(sciport->gpios);
>
> if (sciport->has_rtscts) {
> - if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(sciport->gpios,
> - UART_GPIO_CTS)) ||
> - !IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(sciport->gpios,
> - UART_GPIO_RTS))) {
> + if (mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_CTS) ||
> + mctrl_gpio_to_gpiod(sciport->gpios, UART_GPIO_RTS)) {
> dev_err(&dev->dev, "Conflicting RTS/CTS config\n");
> return -EINVAL;
> }

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2017-03-03 19:59    [W:0.087 / U:1.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site