Messages in this thread | | | Subject | Re: [PATCH 0/2] mtd: spi-nor: add stm32 qspi driver | From | Cyrille Pitchen <> | Date | Wed, 29 Mar 2017 18:51:05 +0200 |
| |
Hi Ludovic,
Le 27/03/2017 à 14:54, Ludovic Barre a écrit : > From: Ludovic Barre <ludovic.barre@st.com> > > This patch set adds a SPI-NOR driver for stm32 QSPI controller. > It is a specialized SPI interface for serial Flash devices. > It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories. > > It can operate in any of the following modes: > -indirect mode: all the operations are performed using the quadspi > registers > -read memory-mapped mode: the external Flash memory is mapped to the > microcontroller address space and is seen by the system as if it was > an internal memory > > Ludovic Barre (2): > dt-bindings: Document the STM32 QSPI bindings > mtd: spi-nor: add driver for STM32 quad spi flash controller > > .../devicetree/bindings/mtd/stm32-quadspi.txt | 45 ++ > drivers/mtd/spi-nor/Kconfig | 7 + > drivers/mtd/spi-nor/Makefile | 1 + > drivers/mtd/spi-nor/stm32-quadspi.c | 679 +++++++++++++++++++++ > 4 files changed, 732 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt > create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c >
Just a small word to warn you that I'm likely to ask you to rebase this series onto the patch "mtd: spi-nor: introduce more SPI protocols and the Dual Transfer Mode". Indeed, I need to synchronize with Marek first but I plan to merge this patch within few days.
Best regards,
Cyrille
| |