lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] fault-inject: support systematic fault injection
Date
Add /proc/self/task/<current-tid>/fail-nth file that allows failing
0-th, 1-st, 2-nd and so on calls systematically.
Excerpt from the added documentation:

===
Write to this file of integer N makes N-th call in the current task fail
(N is 0-based). Read from this file returns a single char 'Y' or 'N'
that says if the fault setup with a previous write to this file was
injected or not, and disables the fault if it wasn't yet injected.
Note that this file enables all types of faults (slab, futex, etc).
This setting takes precedence over all other generic settings like
probability, interval, times, etc. But per-capability settings
(e.g. fail_futex/ignore-private) take precedence over it.
This feature is intended for systematic testing of faults in a single
system call. See an example below.
===

Why adding new setting:
1. Existing settings are global rather than per-task.
So parallel testing is not possible.
2. attr->interval is close but it depends on attr->count
which is non reset to 0, so interval does not work as expected.
3. Trying to model this with existing settings requires manipulations
of all of probability, interval, times, space, task-filter and
unexposed count and per-task make-it-fail files.
4. Existing settings are per-failure-type, and the set of failure
types is potentially expanding.
5. make-it-fail can't be changed by unprivileged user and aggressive
stress testing better be done from an unprivileged user.
Similarly, this would require opening the debugfs files to the
unprivileged user, as he would need to reopen at least times file
(not possible to pre-open before dropping privs).

The proposed interface solves all of the above (see the example).

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org

---
We want to integrate this into syzkaller fuzzer.
A prototype has found 10 bugs in kernel in first day of usage:
https://groups.google.com/forum/#!searchin/syzkaller/%22FAULT_INJECTION%22%7Csort:relevance

Changes since v1:
- change file name from /sys/kernel/debug/fail_once
to /proc/self/task/<current-tid>/fail-nth as per
Akinobu suggestion

---
Documentation/fault-injection/fault-injection.txt | 78 +++++++++++++++++++++++
fs/proc/base.c | 52 +++++++++++++++
include/linux/sched.h | 1 +
kernel/fork.c | 4 ++
lib/fault-inject.c | 7 ++
5 files changed, 142 insertions(+)

diff --git a/Documentation/fault-injection/fault-injection.txt b/Documentation/fault-injection/fault-injection.txt
index 415484f3d59a..192d8cbcc5f9 100644
--- a/Documentation/fault-injection/fault-injection.txt
+++ b/Documentation/fault-injection/fault-injection.txt
@@ -134,6 +134,22 @@ use the boot option:
fail_futex=
mmc_core.fail_request=<interval>,<probability>,<space>,<times>

+o proc entries
+
+- /proc/self/task/<current-tid>/fail-nth:
+
+ Write to this file of integer N makes N-th call in the current task fail
+ (N is 0-based). Read from this file returns a single char 'Y' or 'N'
+ that says if the fault setup with a previous write to this file was
+ injected or not, and disables the fault if it wasn't yet injected.
+ Note that this file enables all types of faults (slab, futex, etc).
+ This setting takes precedence over all other generic debugfs settings
+ like probability, interval, times, etc. But per-capability settings
+ (e.g. fail_futex/ignore-private) take precedence over it.
+
+ This feature is intended for systematic testing of faults in a single
+ system call. See an example below.
+
How to add new fault injection capability
-----------------------------------------

@@ -278,3 +294,65 @@ allocation failure.
# env FAILCMD_TYPE=fail_page_alloc \
./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
+
+Systematic faults using fail-nth
+---------------------------------
+
+The following code systematically faults 0-th, 1-st, 2-nd and so on
+capabilities in the socketpair() system call.
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/syscall.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <errno.h>
+
+int main()
+{
+ int i, err, res, fail_nth, fds[2];
+ char buf[128];
+
+ system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait");
+ sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid));
+ fail_nth = open(buf, O_RDWR);
+ for (i = 0;; i++) {
+ sprintf(buf, "%d", i);
+ write(fail_nth, buf, strlen(buf));
+ res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds);
+ err = errno;
+ read(fail_nth, buf, 1);
+ if (res == 0) {
+ close(fds[0]);
+ close(fds[1]);
+ }
+ printf("%d-th fault %c: res=%d/%d\n", i, buf[0], res, err);
+ if (buf[0] != 'Y')
+ break;
+ }
+ return 0;
+}
+
+An example output:
+
+0-th fault Y: res=-1/23
+1-th fault Y: res=-1/23
+2-th fault Y: res=-1/23
+3-th fault Y: res=-1/12
+4-th fault Y: res=-1/12
+5-th fault Y: res=-1/23
+6-th fault Y: res=-1/23
+7-th fault Y: res=-1/23
+8-th fault Y: res=-1/12
+9-th fault Y: res=-1/12
+10-th fault Y: res=-1/12
+11-th fault Y: res=-1/12
+12-th fault Y: res=-1/12
+13-th fault Y: res=-1/12
+14-th fault Y: res=-1/12
+15-th fault Y: res=-1/12
+16-th fault N: res=0/12
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 6e8655845830..66001172249b 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1353,6 +1353,53 @@ static const struct file_operations proc_fault_inject_operations = {
.write = proc_fault_inject_write,
.llseek = generic_file_llseek,
};
+
+static ssize_t proc_fail_nth_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ int err, n;
+
+ task = get_proc_task(file_inode(file));
+ if (!task)
+ return -ESRCH;
+ put_task_struct(task);
+ if (task != current)
+ return -EPERM;
+ err = kstrtoint_from_user(buf, count, 10, &n);
+ if (err)
+ return err;
+ if (n < 0 || n == INT_MAX)
+ return -EINVAL;
+ current->fail_nth = n + 1;
+ return len;
+}
+
+static ssize_t proc_fail_nth_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ struct task_struct *task;
+ int err;
+
+ task = get_proc_task(file_inode(file));
+ if (!task)
+ return -ESRCH;
+ put_task_struct(task);
+ if (task != current)
+ return -EPERM;
+ if (count < 1)
+ return -EINVAL;
+ err = put_user((char)(current->fail_nth ? 'N' : 'Y'), buf);
+ if (err)
+ return err;
+ current->fail_nth = 0;
+ return 1;
+}
+
+static const struct file_operations proc_fail_nth_operations = {
+ .read = proc_fail_nth_read,
+ .write = proc_fail_nth_write,
+};
#endif


@@ -3296,6 +3343,11 @@ static const struct pid_entry tid_base_stuff[] = {
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, proc_fault_inject_operations),
+ /*
+ * Operations on the file check that the task is current,
+ * so we create it with 0666 to support testing under unprivileged user.
+ */
+ REG("fail-nth", 0666, proc_fail_nth_operations),
#endif
#ifdef CONFIG_TASK_IO_ACCOUNTING
ONE("io", S_IRUSR, proc_tid_io_accounting),
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 543e0ea82684..7b50221fea51 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1897,6 +1897,7 @@ struct task_struct {
#endif
#ifdef CONFIG_FAULT_INJECTION
int make_it_fail;
+ int fail_nth;
#endif
/*
* when (nr_dirtied >= nr_dirtied_pause), it's time to call
diff --git a/kernel/fork.c b/kernel/fork.c
index 61284d8122fa..869c97a0a930 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -545,6 +545,10 @@ static struct task_struct *dup_task_struct(struct task_struct *orig, int node)

kcov_task_init(tsk);

+#ifdef CONFIG_FAULT_INJECTION
+ tsk->fail_nth = 0;
+#endif
+
return tsk;

free_stack:
diff --git a/lib/fault-inject.c b/lib/fault-inject.c
index 6a823a53e357..d6516ba64d33 100644
--- a/lib/fault-inject.c
+++ b/lib/fault-inject.c
@@ -107,6 +107,12 @@ static inline bool fail_stacktrace(struct fault_attr *attr)

bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ if (in_task() && current->fail_nth) {
+ if (--current->fail_nth == 0)
+ goto fail;
+ return false;
+ }
+
/* No need to check any other properties if the probability is 0 */
if (attr->probability == 0)
return false;
@@ -134,6 +140,7 @@ bool should_fail(struct fault_attr *attr, ssize_t size)
if (!fail_stacktrace(attr))
return false;

+fail:
fail_dump(attr);

if (atomic_read(&attr->times) != -1)
--
2.12.2.564.g063fe858b8-goog
\
 
 \ /
  Last update: 2017-03-28 15:04    [W:0.095 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site