lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/8] bus: brcmstb_gisb: Add ARM64 support
Date
From: Florian Fainelli <f.fainelli@gmail.com>

Hook to the ARM64 data abort exception #16: synchronous external
abort, which is how the GISB errors will be funneled back to the
ARM64 CPU in case of problems

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 15 ++++++++++++---
2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0a52da439abf..d2a5f1184022 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -57,7 +57,7 @@ config ARM_CCN

config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM || MIPS
+ depends on ARM || ARM64 || MIPS
default ARCH_BRCMSTB || BMIPS_GENERIC
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
diff --git a/drivers/bus/brcmstb_gisb.c b/drivers/bus/brcmstb_gisb.c
index edf79432f899..500b6bb5c739 100644
--- a/drivers/bus/brcmstb_gisb.c
+++ b/drivers/bus/brcmstb_gisb.c
@@ -30,6 +30,11 @@
#include <asm/signal.h>
#endif

+#ifdef CONFIG_ARM64
+#include <asm/signal.h>
+#include <asm/system_misc.h>
+#endif
+
#ifdef CONFIG_MIPS
#include <asm/traps.h>
#endif
@@ -225,7 +230,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
return 0;
}

-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
@@ -235,7 +240,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
brcmstb_gisb_arb_decode_addr(gdev, "bus error");

-#if !defined(CONFIG_ARM_LPAE)
+#if defined(CONFIG_ARM) && !defined(CONFIG_ARM_LPAE)
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
@@ -247,7 +252,7 @@ static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
/* Always report unhandled exception */
return 1;
}
-#endif
+#endif /* CONFIG_ARM || CONFIG_ARM64 */

#ifdef CONFIG_MIPS
static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
@@ -395,6 +400,10 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
"imprecise external abort");
#endif
#endif /* CONFIG_ARM */
+#ifdef CONFIG_ARM64
+ hook_fault_code(16, brcmstb_bus_error_handler, SIGBUS, 0,
+ "synchronous external abort");
+#endif
#ifdef CONFIG_MIPS
board_be_handler = brcmstb_bus_error_handler;
#endif
--
2.12.0
\
 
 \ /
  Last update: 2017-03-28 23:36    [W:0.102 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site