lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/8] bus: brcmstb_gisb: add support for GISBv7 arbiter
Date
This patch set contains changes to enable the GISB arbiter driver
on the latest ARM64 architecture Set-Top Box chips from Broadcom.

This driver relies on being able to hook the abort handlers of
the processor core that are triggered by bus error signals
generated by the GISB bus arbiter hardware found in BCM7XXX chips.
The first two patches are based on the arm64/for-next/core
branch to enable this functionality for the arm64 architecture.

The remaining patches correct some issues with the existing driver,
add the ARM64 architecture specific support to the driver, and
finally add the new register map for the GISBv7 hardware first
appearing in the BCM7278 device.

Changes since v1 at [1]:
- Removed code associated with hooking SError handling in favor
of a registered notifier (Thanks Mark!)
- Removed an unnecessary explicit cast (Thanks Gregory!)

[1] https://lkml.org/lkml/2017/3/24/413

Doug Berger (6):
arm64: mm: mark fault_info __ro_after_init
bus: brcmstb_gisb: Use register offsets with writes too
bus: brcmstb_gisb: Correct hooking of ARM aborts
bus: brcmstb_gisb: correct support for 64-bit address output
bus: brcmstb_gisb: add notifier handling
bus: brcmstb_gisb: update to support new revision

Florian Fainelli (2):
arm64: mm: Allow installation of memory abort handlers
bus: brcmstb_gisb: Add ARM64 support

.../devicetree/bindings/bus/brcm,gisb-arb.txt | 3 +-
arch/arm64/include/asm/system_misc.h | 3 +
arch/arm64/mm/fault.c | 17 +++-
drivers/bus/Kconfig | 2 +-
drivers/bus/brcmstb_gisb.c | 111 ++++++++++++++++-----
5 files changed, 106 insertions(+), 30 deletions(-)

--
2.12.0

\
 
 \ /
  Last update: 2017-03-28 23:36    [W:0.090 / U:1.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site