lkml.org 
[lkml]   [2017]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v4 3/8] phy: sun4i-usb: add PHYCTL offset for H3 SoC
On Fri, Mar 24, 2017 at 2:27 PM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
>
>
> 24.03.2017, 11:05, "Chen-Yu Tsai" <wens@csie.org>:
>> On Mon, Mar 20, 2017 at 12:19 AM, Icenowy Zheng <icenowy@aosc.xyz> wrote:
>>> The config structure of H3 in phy-sun4i-usb driver have the PHYCTL
>>> register offset missing.
>>>
>>> Add it. Because it's a SoC after A33, its PHYCTL offset should be 0x10.
>>
>> You are implying that all SoCs after A33 have PHYCTL at 0x10.
>>
>> This is not true. As the A83T, which was released after the A33, has
>> PHYCTL at the old offset.
>
> No, in Allwinner's BSP A83T is using also PHYCTL at 0x10.
>
> The code in linux-3.4/drivers/usb/sunxi_usb/include/sunxi_usb_bsp.c is
> ```
> #if defined (CONFIG_ARCH_SUN8IW5) || defined (CONFIG_ARCH_SUN8IW6) || defined (CONFIG_ARCH_SUN8IW9) || defined (CONFIG_ARCH_SUN8IW8) || defined (CONFIG_ARCH_SUN8IW7)
> #define USBPHYC_REG_o_PHYCTL 0x0410
> #else
> #define USBPHYC_REG_o_PHYCTL 0x0404
> #endif
> ```
>
> In linux-3.10/drivers/usb/sunxi_usb/include/sunxi_usb_bsp.c is
> ```
> #if defined (CONFIG_ARCH_SUN50I) || defined (CONFIG_ARCH_SUN8IW10) || defined (CONFIG_ARCH_SUN8IW11)
> #define USBPHYC_REG_o_PHYCTL 0x0410
> #else
> #define USBPHYC_REG_o_PHYCTL 0x0404
> #endif
> ```
>
> So sun50i* and sun50iw5~w11 all use PHYCTL at 0x10.
>

Seems you are right. However I think it's best to not assume or infer
anything. Who knows, Allwinner might re-release some old SoC under a
different under a different name again.

Just state the facts: H3 has its PHYCTL at 0x10.

ChenYu

>>
>> Just state that H3 has PHYCTL at 0x10.
>>
>> ChenYu
>>
>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>>> ---
>>> New patch in v4.
>>>
>>> drivers/phy/phy-sun4i-usb.c | 1 +
>>> 1 file changed, 1 insertion(+)
>>>
>>> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
>>> index 62b4d25448c6..a650f283f6ff 100644
>>> --- a/drivers/phy/phy-sun4i-usb.c
>>> +++ b/drivers/phy/phy-sun4i-usb.c
>>> @@ -821,6 +821,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
>>> .num_phys = 4,
>>> .type = sun8i_h3_phy,
>>> .disc_thresh = 3,
>>> + .phyctl_offset = REG_PHYCTL_A33,
>>> .dedicated_clocks = true,
>>> .enable_pmu_unk1 = true,
>>> };
>>> --
>>> 2.12.0
>>>
>>> --
>>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
>>> For more options, visit https://groups.google.com/d/optout.
>>
>> --
>> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

\
 
 \ /
  Last update: 2017-03-24 07:58    [W:0.037 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site