lkml.org 
[lkml]   [2017]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] i2c: tegra-bpmp: Enable Tegra BPMP I2C adapter
From
Date

On 20/03/17 14:05, Thierry Reding wrote:
> * PGP Signed by an unknown key
>
> On Wed, Mar 15, 2017 at 12:20:10PM +0000, Jon Hunter wrote:
>> Enable the Tegra BPMP I2C adapter by default if the Tegra BPMP itself
>> is enabled. This adapter is used as the I2C interface for the PMIC on
>> the Tegra186 Jetson-TX2 platform.
>>
>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
>> ---
>> drivers/i2c/busses/Kconfig | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
>> index 8adc0f1d7ad0..9e024ae8a067 100644
>> --- a/drivers/i2c/busses/Kconfig
>> +++ b/drivers/i2c/busses/Kconfig
>> @@ -933,6 +933,7 @@ config I2C_TEGRA
>> config I2C_TEGRA_BPMP
>> tristate "NVIDIA Tegra BPMP I2C controller"
>> depends on TEGRA_BPMP
>> + default y if TEGRA_BPMP
>
> I think "if TEGRA_BPMP" in the line above implies "depends on
> TEGRA_BPMP", so it's redundant. "default y" should be equivalent. That
> said, I'm not sure if we really want to always enable this. There could
> be boards with a BPMP that don't use the I2C controller.

Initially, I had thought about putting a select for this under the
ARCH_TEGRA_186_SOC in drivers/soc/tegra/Kconfig. We could always do that
in the future if it turns out the BPMP does not have i2c on newer chips.

Cheers
Jon

--
nvpublic

\
 
 \ /
  Last update: 2017-03-24 10:30    [W:0.059 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site