lkml.org 
[lkml]   [2017]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 7/8] gpio: acpi: Factor out acpi_gpio_to_gpiod_flags() helper
Date
The helper function acpi_gpio_to_gpiod_flags() will be used later to configure
pin properly whenever it's requested.

While here, introduce a checking error code returned by gpiod_configure_flags()
and bail out if it's not okay.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/gpio/gpiolib-acpi.c | 61 ++++++++++++++++++++++++++-------------------
1 file changed, 36 insertions(+), 25 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 61518273e360..d4de84670c5b 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -417,6 +417,31 @@ static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
return false;
}

+static enum gpiod_flags
+acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
+{
+ bool pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP;
+
+ switch (agpio->io_restriction) {
+ case ACPI_IO_RESTRICT_INPUT:
+ return GPIOD_IN;
+ case ACPI_IO_RESTRICT_OUTPUT:
+ /*
+ * ACPI GPIO resources don't contain an initial value for the
+ * GPIO. Therefore we deduce that value from the pull field
+ * instead. If the pin is pulled up we assume default to be
+ * high, otherwise low.
+ */
+ return pull_up ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
+ default:
+ /*
+ * Assume that the BIOS has configured the direction and pull
+ * accordingly.
+ */
+ return GPIOD_ASIS;
+ }
+}
+
struct acpi_gpio_lookup {
struct acpi_gpio_info info;
int index;
@@ -732,7 +757,6 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
struct acpi_resource *ares;
int pin_index = (int)address;
acpi_status status;
- bool pull_up;
int length;
int i;

@@ -747,7 +771,6 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
}

agpio = &ares->data.gpio;
- pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP;

if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
function == ACPI_WRITE)) {
@@ -798,35 +821,23 @@ acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
}

if (!found) {
- desc = gpiochip_request_own_desc(chip, pin,
- "ACPI:OpRegion");
+ enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
+ const char *label = "ACPI:OpRegion";
+ int err;
+
+ desc = gpiochip_request_own_desc(chip, pin, label);
if (IS_ERR(desc)) {
status = AE_ERROR;
mutex_unlock(&achip->conn_lock);
goto out;
}

- switch (agpio->io_restriction) {
- case ACPI_IO_RESTRICT_INPUT:
- gpiod_direction_input(desc);
- break;
- case ACPI_IO_RESTRICT_OUTPUT:
- /*
- * ACPI GPIO resources don't contain an
- * initial value for the GPIO. Therefore we
- * deduce that value from the pull field
- * instead. If the pin is pulled up we
- * assume default to be high, otherwise
- * low.
- */
- gpiod_direction_output(desc, pull_up);
- break;
- default:
- /*
- * Assume that the BIOS has configured the
- * direction and pull accordingly.
- */
- break;
+ err = gpiod_configure_flags(desc, label, 0, flags);
+ if (err < 0) {
+ status = AE_NOT_CONFIGURED;
+ gpiochip_free_own_desc(desc);
+ mutex_unlock(&achip->conn_lock);
+ goto out;
}

conn = kzalloc(sizeof(*conn), GFP_KERNEL);
--
2.11.0
\
 
 \ /
  Last update: 2017-03-23 20:48    [W:0.157 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site