lkml.org 
[lkml]   [2017]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 1/6] mtd: spi-nor: introduce more SPI protocols and the Dual Transfer Mode
From
Date
On 03/23/2017 12:33 AM, Cyrille Pitchen wrote:
> This patch changes the prototype of spi_nor_scan(): its 3rd parameter
> is replaced by a 'struct spi_nor_hwcaps' pointer, which tells the spi-nor
> framework about the actual hardware capabilities supported by the SPI
> controller and its driver.
>
> Besides, this patch also introduces a new 'struct spi_nor_flash_parameter'
> telling the spi-nor framework about the hardware capabilities supported by
> the SPI flash memory and the associated settings required to use those
> hardware caps.
>
> Currently the 'struct spi_nor_flash_parameter' is filled with legacy
> values but a later patch will allow to fill it dynamically by reading the
> JESD216 Serial Flash Discoverable Parameter (SFDP) tables from the SPI
> memory.
>
> With both structures, the spi-nor framework can now compute the best
> match between hardware caps supported by both the (Q)SPI memory and
> controller hence selecting the relevant SPI protocols and op codes for
> (Fast) Read, Page Program and Sector Erase operations.
>
> The 'struct spi_nor_flash_parameter' also provides the spi-nor framework
> with the number of dummy cycles to be used with each Fast Read commands
> and the erase block size associated to the erase block op codes.
>
> Finally the 'struct spi_nor_flash_parameter', through the optional
> .enable_quad_io() hook, tells the spi-nor framework how to set the Quad
> Enable (QE) bit of the QSPI memory to enable its Quad SPI features.

The Aspeed controller only supports Dual I/O and a helper similar
to the one for Quad I/O would be needed to setup the chip for
multiple I/O:

int (*dual_enable)(struct spi_nor *nor);

Is the approach correct ? or maybe rename the current 'quad_enable()'
to 'multiple_enable()' and add an extra parameter.

I have a bunch of patches queued for Dual I/O data support but I
think they will conflict with your patches. I will wait for this
one to be merged. Then, I can look at Dual I/O address + data
support.

Thanks,

C.


> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
> ---
> drivers/mtd/devices/m25p80.c | 16 +-
> drivers/mtd/spi-nor/aspeed-smc.c | 23 +-
> drivers/mtd/spi-nor/atmel-quadspi.c | 80 +++---
> drivers/mtd/spi-nor/cadence-quadspi.c | 18 +-
> drivers/mtd/spi-nor/fsl-quadspi.c | 8 +-
> drivers/mtd/spi-nor/hisi-sfc.c | 31 ++-
> drivers/mtd/spi-nor/intel-spi.c | 7 +-
> drivers/mtd/spi-nor/mtk-quadspi.c | 16 +-
> drivers/mtd/spi-nor/nxp-spifi.c | 22 +-
> drivers/mtd/spi-nor/spi-nor.c | 441 +++++++++++++++++++++++++++-------
> include/linux/mtd/spi-nor.h | 158 +++++++++++-
> 11 files changed, 643 insertions(+), 177 deletions(-)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index c4df3b1bded0..68986a26c8fe 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -111,10 +111,10 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
>
> static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
> {
> - switch (nor->flash_read) {
> - case SPI_NOR_DUAL:
> + switch (nor->read_proto) {
> + case SNOR_PROTO_1_1_2:
> return 2;
> - case SPI_NOR_QUAD:
> + case SNOR_PROTO_1_1_4:
> return 4;
> default:
> return 0;
> @@ -196,7 +196,9 @@ static int m25p_probe(struct spi_device *spi)
> struct flash_platform_data *data;
> struct m25p *flash;
> struct spi_nor *nor;
> - enum read_mode mode = SPI_NOR_NORMAL;
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ | SNOR_HWCAPS_PP),
> + };
> char *flash_name;
> int ret;
>
> @@ -222,9 +224,9 @@ static int m25p_probe(struct spi_device *spi)
> flash->spi = spi;
>
> if (spi->mode & SPI_RX_QUAD)
> - mode = SPI_NOR_QUAD;
> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
> else if (spi->mode & SPI_RX_DUAL)
> - mode = SPI_NOR_DUAL;
> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
>
> if (data && data->name)
> nor->mtd.name = data->name;
> @@ -241,7 +243,7 @@ static int m25p_probe(struct spi_device *spi)
> else
> flash_name = spi->modalias;
>
> - ret = spi_nor_scan(nor, flash_name, mode);
> + ret = spi_nor_scan(nor, flash_name, &hwcaps);
> if (ret)
> return ret;
>
> diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c
> index 56051d30f000..723026d9cf0c 100644
> --- a/drivers/mtd/spi-nor/aspeed-smc.c
> +++ b/drivers/mtd/spi-nor/aspeed-smc.c
> @@ -585,14 +585,12 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
> * TODO: Adjust clocks if fast read is supported and interpret
> * SPI-NOR flags to adjust controller settings.
> */
> - switch (chip->nor.flash_read) {
> - case SPI_NOR_NORMAL:
> - cmd = CONTROL_COMMAND_MODE_NORMAL;
> - break;
> - case SPI_NOR_FAST:
> - cmd = CONTROL_COMMAND_MODE_FREAD;
> - break;
> - default:
> + if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
> + if (chip->nor.read_dummy == 0)
> + cmd = CONTROL_COMMAND_MODE_NORMAL;
> + else
> + cmd = CONTROL_COMMAND_MODE_FREAD;
> + } else {
> dev_err(chip->nor.dev, "unsupported SPI read mode\n");
> return -EINVAL;
> }
> @@ -608,6 +606,11 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
> static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
> struct device_node *np, struct resource *r)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_PP),
> + };
> const struct aspeed_smc_info *info = controller->info;
> struct device *dev = controller->dev;
> struct device_node *child;
> @@ -671,11 +674,11 @@ static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
> break;
>
> /*
> - * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL
> + * TODO: Add support for Dual and Quad SPI protocols
>
> * attach when board support is present as determined
> * by of property.
> */
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL);
> + ret = spi_nor_scan(nor, NULL, &hwcaps);
> if (ret)
> break;
>
> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> index 47937d9beec6..9f579f7c1733 100644
> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> @@ -275,14 +275,48 @@ static void atmel_qspi_debug_command(struct atmel_qspi *aq,
>
> static int atmel_qspi_run_command(struct atmel_qspi *aq,
> const struct atmel_qspi_command *cmd,
> - u32 ifr_tfrtyp, u32 ifr_width)
> + u32 ifr_tfrtyp, enum spi_nor_protocol proto)
> {
> u32 iar, icr, ifr, sr;
> int err = 0;
>
> iar = 0;
> icr = 0;
> - ifr = ifr_tfrtyp | ifr_width;
> + ifr = ifr_tfrtyp;
> +
> + /* Set the SPI protocol */
> + switch (proto) {
> + case SNOR_PROTO_1_1_1:
> + ifr |= QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
> + break;
> +
> + case SNOR_PROTO_1_1_2:
> + ifr |= QSPI_IFR_WIDTH_DUAL_OUTPUT;
> + break;
> +
> + case SNOR_PROTO_1_1_4:
> + ifr |= QSPI_IFR_WIDTH_QUAD_OUTPUT;
> + break;
> +
> + case SNOR_PROTO_1_2_2:
> + ifr |= QSPI_IFR_WIDTH_DUAL_IO;
> + break;
> +
> + case SNOR_PROTO_1_4_4:
> + ifr |= QSPI_IFR_WIDTH_QUAD_IO;
> + break;
> +
> + case SNOR_PROTO_2_2_2:
> + ifr |= QSPI_IFR_WIDTH_DUAL_CMD;
> + break;
> +
> + case SNOR_PROTO_4_4_4:
> + ifr |= QSPI_IFR_WIDTH_QUAD_CMD;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
>
> /* Compute instruction parameters */
> if (cmd->enable.bits.instruction) {
> @@ -434,7 +468,7 @@ static int atmel_qspi_read_reg(struct spi_nor *nor, u8 opcode,
> cmd.rx_buf = buf;
> cmd.buf_len = len;
> return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ,
> - QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
> + nor->reg_proto);
> }
>
> static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode,
> @@ -450,7 +484,7 @@ static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode,
> cmd.tx_buf = buf;
> cmd.buf_len = len;
> return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE,
> - QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
> + nor->reg_proto);
> }
>
> static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len,
> @@ -469,7 +503,7 @@ static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len,
> cmd.tx_buf = write_buf;
> cmd.buf_len = len;
> ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM,
> - QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
> + nor->write_proto);
> return (ret < 0) ? ret : len;
> }
>
> @@ -484,7 +518,7 @@ static int atmel_qspi_erase(struct spi_nor *nor, loff_t offs)
> cmd.instruction = nor->erase_opcode;
> cmd.address = (u32)offs;
> return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE,
> - QSPI_IFR_WIDTH_SINGLE_BIT_SPI);
> + nor->reg_proto);
> }
>
> static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
> @@ -493,27 +527,8 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
> struct atmel_qspi *aq = nor->priv;
> struct atmel_qspi_command cmd;
> u8 num_mode_cycles, num_dummy_cycles;
> - u32 ifr_width;
> ssize_t ret;
>
> - switch (nor->flash_read) {
> - case SPI_NOR_NORMAL:
> - case SPI_NOR_FAST:
> - ifr_width = QSPI_IFR_WIDTH_SINGLE_BIT_SPI;
> - break;
> -
> - case SPI_NOR_DUAL:
> - ifr_width = QSPI_IFR_WIDTH_DUAL_OUTPUT;
> - break;
> -
> - case SPI_NOR_QUAD:
> - ifr_width = QSPI_IFR_WIDTH_QUAD_OUTPUT;
> - break;
> -
> - default:
> - return -EINVAL;
> - }
> -
> if (nor->read_dummy >= 2) {
> num_mode_cycles = 2;
> num_dummy_cycles = nor->read_dummy - 2;
> @@ -536,7 +551,7 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len,
> cmd.rx_buf = read_buf;
> cmd.buf_len = len;
> ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ_MEM,
> - ifr_width);
> + nor->read_proto);
> return (ret < 0) ? ret : len;
> }
>
> @@ -590,6 +605,17 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id)
>
> static int atmel_qspi_probe(struct platform_device *pdev)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_READ_1_1_2 |
> + SNOR_HWCAPS_READ_1_2_2 |
> + SNOR_HWCAPS_READ_1_1_4 |
> + SNOR_HWCAPS_READ_1_4_4 |
> + SNOR_HWCAPS_PP |
> + SNOR_HWCAPS_PP_1_1_4 |
> + SNOR_HWCAPS_PP_1_4_4),
> + };
> struct device_node *child, *np = pdev->dev.of_node;
> struct atmel_qspi *aq;
> struct resource *res;
> @@ -679,7 +705,7 @@ static int atmel_qspi_probe(struct platform_device *pdev)
> if (err)
> goto disable_clk;
>
> - err = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + err = spi_nor_scan(nor, NULL, &hwcaps);
> if (err)
> goto disable_clk;
>
> diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c
> index 9f8102de1b16..3f91a3e97892 100644
> --- a/drivers/mtd/spi-nor/cadence-quadspi.c
> +++ b/drivers/mtd/spi-nor/cadence-quadspi.c
> @@ -855,15 +855,14 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read)
> f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
>
> if (read) {
> - switch (nor->flash_read) {
> - case SPI_NOR_NORMAL:
> - case SPI_NOR_FAST:
> + switch (nor->read_proto) {
> + case SNOR_PROTO_1_1_1:
> f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
> break;
> - case SPI_NOR_DUAL:
> + case SNOR_PROTO_1_1_2:
> f_pdata->data_width = CQSPI_INST_TYPE_DUAL;
> break;
> - case SPI_NOR_QUAD:
> + case SNOR_PROTO_1_1_4:
> f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
> break;
> default:
> @@ -1069,6 +1068,13 @@ static void cqspi_controller_init(struct cqspi_st *cqspi)
>
> static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_READ_1_1_2 |
> + SNOR_HWCAPS_READ_1_1_4 |
> + SNOR_HWCAPS_PP),
> + };
> struct platform_device *pdev = cqspi->pdev;
> struct device *dev = &pdev->dev;
> struct cqspi_flash_pdata *f_pdata;
> @@ -1123,7 +1129,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
> goto err;
> }
>
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + ret = spi_nor_scan(nor, NULL, &hwcaps);
> if (ret)
> goto err;
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 1476135e0d50..ec9c8e960fd2 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -957,6 +957,12 @@ static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
>
> static int fsl_qspi_probe(struct platform_device *pdev)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_READ_1_1_4 |
> + SNOR_HWCAPS_PP),
> + };
> struct device_node *np = pdev->dev.of_node;
> struct device *dev = &pdev->dev;
> struct fsl_qspi *q;
> @@ -1065,7 +1071,7 @@ static int fsl_qspi_probe(struct platform_device *pdev)
> /* set the chip address for READID */
> fsl_qspi_set_base_addr(q, nor);
>
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + ret = spi_nor_scan(nor, NULL, &hwcaps);
> if (ret)
> goto mutex_failed;
>
> diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
> index a286350627a6..80e2d173abdd 100644
> --- a/drivers/mtd/spi-nor/hisi-sfc.c
> +++ b/drivers/mtd/spi-nor/hisi-sfc.c
> @@ -120,19 +120,24 @@ static inline int wait_op_finish(struct hifmc_host *host)
> (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
> }
>
> -static int get_if_type(enum read_mode flash_read)
> +static int get_if_type(enum spi_nor_protocol proto)
> {
> enum hifmc_iftype if_type;
>
> - switch (flash_read) {
> - case SPI_NOR_DUAL:
> + switch (proto) {
> + case SNOR_PROTO_1_1_2:
> if_type = IF_TYPE_DUAL;
> break;
> - case SPI_NOR_QUAD:
> + case SNOR_PROTO_1_2_2:
> + if_type = IF_TYPE_DIO;
> + break;
> + case SNOR_PROTO_1_1_4:
> if_type = IF_TYPE_QUAD;
> break;
> - case SPI_NOR_NORMAL:
> - case SPI_NOR_FAST:
> + case SNOR_PROTO_1_4_4:
> + if_type = IF_TYPE_QIO;
> + break;
> + case SNOR_PROTO_1_1_1:
> default:
> if_type = IF_TYPE_STD;
> break;
> @@ -253,7 +258,10 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
> writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN);
>
> reg = OP_CFG_FM_CS(priv->chipselect);
> - if_type = get_if_type(nor->flash_read);
> + if (op_type == FMC_OP_READ)
> + if_type = get_if_type(nor->read_proto);
> + else
> + if_type = get_if_type(nor->write_proto);
> reg |= OP_CFG_MEM_IF_TYPE(if_type);
> if (op_type == FMC_OP_READ)
> reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
> @@ -321,6 +329,13 @@ static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to,
> static int hisi_spi_nor_register(struct device_node *np,
> struct hifmc_host *host)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_READ_1_1_2 |
> + SNOR_HWCAPS_READ_1_1_4 |
> + SNOR_HWCAPS_PP),
> + };
> struct device *dev = host->dev;
> struct spi_nor *nor;
> struct hifmc_priv *priv;
> @@ -362,7 +377,7 @@ static int hisi_spi_nor_register(struct device_node *np,
> nor->read = hisi_spi_nor_read;
> nor->write = hisi_spi_nor_write;
> nor->erase = NULL;
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD);
> + ret = spi_nor_scan(nor, NULL, &hwcaps);
> if (ret)
> return ret;
>
> diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c
> index 986a3d020a3a..515aa1f7f4f1 100644
> --- a/drivers/mtd/spi-nor/intel-spi.c
> +++ b/drivers/mtd/spi-nor/intel-spi.c
> @@ -715,6 +715,11 @@ static void intel_spi_fill_partition(struct intel_spi *ispi,
> struct intel_spi *intel_spi_probe(struct device *dev,
> struct resource *mem, const struct intel_spi_boardinfo *info)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_PP),
> + };
> struct mtd_partition part;
> struct intel_spi *ispi;
> int ret;
> @@ -746,7 +751,7 @@ struct intel_spi *intel_spi_probe(struct device *dev,
> ispi->nor.write = intel_spi_write;
> ispi->nor.erase = intel_spi_erase;
>
> - ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL);
> + ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps);
> if (ret) {
> dev_info(dev, "failed to locate the chip\n");
> return ERR_PTR(ret);
> diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c
> index e661877c23de..615e258866f7 100644
> --- a/drivers/mtd/spi-nor/mtk-quadspi.c
> +++ b/drivers/mtd/spi-nor/mtk-quadspi.c
> @@ -121,20 +121,20 @@ static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
> {
> struct spi_nor *nor = &mt8173_nor->nor;
>
> - switch (nor->flash_read) {
> - case SPI_NOR_FAST:
> + switch (nor->read_proto) {
> + case SNOR_PROTO_1_1_1:
> writeb(nor->read_opcode, mt8173_nor->base +
> MTK_NOR_PRGDATA3_REG);
> writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
> MTK_NOR_CFG1_REG);
> break;
> - case SPI_NOR_DUAL:
> + case SNOR_PROTO_1_1_2:
> writeb(nor->read_opcode, mt8173_nor->base +
> MTK_NOR_PRGDATA3_REG);
> writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
> MTK_NOR_DUAL_REG);
> break;
> - case SPI_NOR_QUAD:
> + case SNOR_PROTO_1_1_4:
> writeb(nor->read_opcode, mt8173_nor->base +
> MTK_NOR_PRGDATA4_REG);
> writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
> @@ -381,6 +381,12 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
> static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
> struct device_node *flash_node)
> {
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_READ_1_1_2 |
> + SNOR_HWCAPS_PP),
> + };
> int ret;
> struct spi_nor *nor;
>
> @@ -399,7 +405,7 @@ static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
> nor->write_reg = mt8173_nor_write_reg;
> nor->mtd.name = "mtk_nor";
> /* initialized with NULL */
> - ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
> + ret = spi_nor_scan(nor, NULL, &hwcaps);
> if (ret)
> return ret;
>
> diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c
> index 73a14f40928b..c5992e099542 100644
> --- a/drivers/mtd/spi-nor/nxp-spifi.c
> +++ b/drivers/mtd/spi-nor/nxp-spifi.c
> @@ -240,13 +240,12 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
>
> static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
> {
> - switch (spifi->nor.flash_read) {
> - case SPI_NOR_NORMAL:
> - case SPI_NOR_FAST:
> + switch (spifi->nor.read_proto) {
> + case SNOR_PROTO_1_1_1:
> spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
> break;
> - case SPI_NOR_DUAL:
> - case SPI_NOR_QUAD:
> + case SNOR_PROTO_1_1_2:
> + case SNOR_PROTO_1_1_4:
> spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
> break;
> default:
> @@ -274,7 +273,11 @@ static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
> static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
> struct device_node *np)
> {
> - enum read_mode flash_read;
> + struct spi_nor_hwcaps hwcaps = {
> + .mask = (SNOR_HWCAPS_READ |
> + SNOR_HWCAPS_READ_FAST |
> + SNOR_HWCAPS_PP),
> + };
> u32 ctrl, property;
> u16 mode = 0;
> int ret;
> @@ -308,13 +311,12 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
>
> if (mode & SPI_RX_DUAL) {
> ctrl |= SPIFI_CTRL_DUAL;
> - flash_read = SPI_NOR_DUAL;
> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
> } else if (mode & SPI_RX_QUAD) {
> ctrl &= ~SPIFI_CTRL_DUAL;
> - flash_read = SPI_NOR_QUAD;
> + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
> } else {
> ctrl |= SPIFI_CTRL_DUAL;
> - flash_read = SPI_NOR_NORMAL;
> }
>
> switch (mode & (SPI_CPHA | SPI_CPOL)) {
> @@ -351,7 +353,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
> */
> nxp_spifi_dummy_id_read(&spifi->nor);
>
> - ret = spi_nor_scan(&spifi->nor, NULL, flash_read);
> + ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
> if (ret) {
> dev_err(spifi->dev, "device scan failed\n");
> return ret;
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d3cb44b28490..cc443c6cbae8 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -150,24 +150,6 @@ static int read_cr(struct spi_nor *nor)
> }
>
> /*
> - * Dummy Cycle calculation for different type of read.
> - * It can be used to support more commands with
> - * different dummy cycle requirements.
> - */
> -static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor)
> -{
> - switch (nor->flash_read) {
> - case SPI_NOR_FAST:
> - case SPI_NOR_DUAL:
> - case SPI_NOR_QUAD:
> - return 8;
> - case SPI_NOR_NORMAL:
> - return 0;
> - }
> - return 0;
> -}
> -
> -/*
> * Write status register 1 byte
> * Returns negative if error occurred.
> */
> @@ -221,6 +203,10 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode)
> { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
> { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
> { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
> +
> + { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
> + { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
> + { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B },
> };
>
> return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
> @@ -1459,30 +1445,6 @@ static int spansion_quad_enable(struct spi_nor *nor)
> return 0;
> }
>
> -static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info)
> -{
> - int status;
> -
> - switch (JEDEC_MFR(info)) {
> - case SNOR_MFR_MACRONIX:
> - status = macronix_quad_enable(nor);
> - if (status) {
> - dev_err(nor->dev, "Macronix quad-read not enabled\n");
> - return -EINVAL;
> - }
> - return status;
> - case SNOR_MFR_MICRON:
> - return 0;
> - default:
> - status = spansion_quad_enable(nor);
> - if (status) {
> - dev_err(nor->dev, "Spansion quad-read not enabled\n");
> - return -EINVAL;
> - }
> - return status;
> - }
> -}
> -
> static int spi_nor_check(struct spi_nor *nor)
> {
> if (!nor->dev || !nor->read || !nor->write ||
> @@ -1535,8 +1497,322 @@ static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
> return 0;
> }
>
> -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> +
> +struct spi_nor_read_command {
> + u8 num_mode_clocks;
> + u8 num_wait_states;
> + u8 opcode;
> + enum spi_nor_protocol proto;
> +};
> +
> +struct spi_nor_pp_command {
> + u8 opcode;
> + enum spi_nor_protocol proto;
> +};
> +
> +enum spi_nor_read_command_index {
> + SNOR_CMD_READ,
> + SNOR_CMD_READ_FAST,
> + SNOR_CMD_READ_1_1_1_DTR,
> +
> + /* Dual SPI */
> + SNOR_CMD_READ_1_1_2,
> + SNOR_CMD_READ_1_2_2,
> + SNOR_CMD_READ_2_2_2,
> + SNOR_CMD_READ_1_2_2_DTR,
> +
> + /* Quad SPI */
> + SNOR_CMD_READ_1_1_4,
> + SNOR_CMD_READ_1_4_4,
> + SNOR_CMD_READ_4_4_4,
> + SNOR_CMD_READ_1_4_4_DTR,
> +
> + /* Octo SPI */
> + SNOR_CMD_READ_1_1_8,
> + SNOR_CMD_READ_1_8_8,
> + SNOR_CMD_READ_8_8_8,
> + SNOR_CMD_READ_1_8_8_DTR,
> +
> + SNOR_CMD_READ_MAX
> +};
> +
> +enum spi_nor_pp_command_index {
> + SNOR_CMD_PP,
> +
> + /* Quad SPI */
> + SNOR_CMD_PP_1_1_4,
> + SNOR_CMD_PP_1_4_4,
> + SNOR_CMD_PP_4_4_4,
> +
> + /* Octo SPI */
> + SNOR_CMD_PP_1_1_8,
> + SNOR_CMD_PP_1_8_8,
> + SNOR_CMD_PP_8_8_8,
> +
> + SNOR_CMD_PP_MAX
> +};
> +
> +struct spi_nor_flash_parameter {
> + u64 size;
> + u32 page_size;
> +
> + struct spi_nor_hwcaps hwcaps;
> + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
> + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
> +
> + int (*quad_enable)(struct spi_nor *nor);
> +};
> +
> +
> +static inline void
> +spi_nor_set_read_settings(struct spi_nor_read_command *read,
> + u8 num_mode_clocks,
> + u8 num_wait_states,
> + u8 opcode,
> + enum spi_nor_protocol proto)
> +{
> + read->num_mode_clocks = num_mode_clocks;
> + read->num_wait_states = num_wait_states;
> + read->opcode = opcode;
> + read->proto = proto;
> +}
> +
> +static inline void
> +spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
> + u8 opcode,
> + enum spi_nor_protocol proto)
> +{
> + pp->opcode = opcode;
> + pp->proto = proto;
> +}
> +
> +static int spi_nor_init_params(struct spi_nor *nor,
> + const struct flash_info *info,
> + struct spi_nor_flash_parameter *params)
> +{
> + /* Set legacy flash parameters as default. */
> + memset(params, 0, sizeof(*params));
> +
> + /* Set SPI NOR sizes. */
> + params->size = info->sector_size * info->n_sectors;
> + params->page_size = info->page_size;
> +
> + /* (Fast) Read settings. */
> + params->hwcaps.mask |= SNOR_HWCAPS_READ;
> + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
> + 0, 0, SPINOR_OP_READ,
> + SNOR_PROTO_1_1_1);
> + if (!(info->flags & SPI_NOR_NO_FR)) {
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
> + 0, 8, SPINOR_OP_READ_FAST,
> + SNOR_PROTO_1_1_1);
> + }
> + if (info->flags & SPI_NOR_DUAL_READ) {
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
> + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
> + 0, 8, SPINOR_OP_READ_1_1_2,
> + SNOR_PROTO_1_1_2);
> + }
> + if (info->flags & SPI_NOR_QUAD_READ) {
> + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
> + spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
> + 0, 8, SPINOR_OP_READ_1_1_4,
> + SNOR_PROTO_1_1_4);
> + }
> +
> + /* Page Program settings. */
> + params->hwcaps.mask |= SNOR_HWCAPS_PP;
> + spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
> + SPINOR_OP_PP, SNOR_PROTO_1_1_1);
> +
> + /* Select the procedure to set the Quad Enable bit. */
> + if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD |
> + SNOR_HWCAPS_PP_QUAD)) {
> + switch (JEDEC_MFR(info)) {
> + case SNOR_MFR_MACRONIX:
> + params->quad_enable = macronix_quad_enable;
> + break;
> +
> + case SNOR_MFR_MICRON:
> + break;
> +
> + default:
> + params->quad_enable = spansion_quad_enable;
> + break;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int spi_nor_hwcaps2cmd(u32 hwcaps)
> {
> + switch (hwcaps) {
> + case SNOR_HWCAPS_READ: return SNOR_CMD_READ;
> + case SNOR_HWCAPS_READ_FAST: return SNOR_CMD_READ_FAST;
> + case SNOR_HWCAPS_READ_1_1_1_DTR: return SNOR_CMD_READ_1_1_1_DTR;
> + case SNOR_HWCAPS_READ_1_1_2: return SNOR_CMD_READ_1_1_2;
> + case SNOR_HWCAPS_READ_1_2_2: return SNOR_CMD_READ_1_2_2;
> + case SNOR_HWCAPS_READ_2_2_2: return SNOR_CMD_READ_2_2_2;
> + case SNOR_HWCAPS_READ_1_2_2_DTR: return SNOR_CMD_READ_1_2_2_DTR;
> + case SNOR_HWCAPS_READ_1_1_4: return SNOR_CMD_READ_1_1_4;
> + case SNOR_HWCAPS_READ_1_4_4: return SNOR_CMD_READ_1_4_4;
> + case SNOR_HWCAPS_READ_4_4_4: return SNOR_CMD_READ_4_4_4;
> + case SNOR_HWCAPS_READ_1_4_4_DTR: return SNOR_CMD_READ_1_4_4_DTR;
> + case SNOR_HWCAPS_READ_1_1_8: return SNOR_CMD_READ_1_1_8;
> + case SNOR_HWCAPS_READ_1_8_8: return SNOR_CMD_READ_1_8_8;
> + case SNOR_HWCAPS_READ_8_8_8: return SNOR_CMD_READ_8_8_8;
> + case SNOR_HWCAPS_READ_1_8_8_DTR: return SNOR_CMD_READ_1_8_8_DTR;
> +
> + case SNOR_HWCAPS_PP: return SNOR_CMD_PP;
> + case SNOR_HWCAPS_PP_1_1_4: return SNOR_CMD_PP_1_1_4;
> + case SNOR_HWCAPS_PP_1_4_4: return SNOR_CMD_PP_1_4_4;
> + case SNOR_HWCAPS_PP_4_4_4: return SNOR_CMD_PP_4_4_4;
> + case SNOR_HWCAPS_PP_1_1_8: return SNOR_CMD_PP_1_1_8;
> + case SNOR_HWCAPS_PP_1_8_8: return SNOR_CMD_PP_1_8_8;
> + case SNOR_HWCAPS_PP_8_8_8: return SNOR_CMD_PP_8_8_8;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int spi_nor_select_read(struct spi_nor *nor,
> + const struct spi_nor_flash_parameter *params,
> + u32 shared_hwcaps)
> +{
> + int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
> + const struct spi_nor_read_command *read;
> +
> + if (best_match < 0)
> + return -EINVAL;
> +
> + cmd = spi_nor_hwcaps2cmd(BIT(best_match));
> + if (cmd < 0)
> + return -EINVAL;
> +
> + read = &params->reads[cmd];
> + nor->read_opcode = read->opcode;
> + nor->read_proto = read->proto;
> +
> + /*
> + * In the spi-nor framework, we don't need to make the difference
> + * between mode clock cycles and wait state clock cycles.
> + * Indeed, the value of the mode clock cycles is used by a QSPI
> + * flash memory to know whether it should enter or leave its 0-4-4
> + * (Continuous Read / XIP) mode.
> + * eXecution In Place is out of the scope of the mtd sub-system.
> + * Hence we choose to merge both mode and wait state clock cycles
> + * into the so called dummy clock cycles.
> + */
> + nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
> + return 0;
> +}
> +
> +static int spi_nor_select_pp(struct spi_nor *nor,
> + const struct spi_nor_flash_parameter *params,
> + u32 shared_hwcaps)
> +{
> + int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
> + const struct spi_nor_pp_command *pp;
> +
> + if (best_match < 0)
> + return -EINVAL;
> +
> + cmd = spi_nor_hwcaps2cmd(BIT(best_match));
> + if (cmd < 0)
> + return -EINVAL;
> +
> + pp = &params->page_programs[cmd];
> + nor->program_opcode = pp->opcode;
> + nor->write_proto = pp->proto;
> + return 0;
> +}
> +
> +static int spi_nor_select_erase(struct spi_nor *nor,
> + const struct flash_info *info)
> +{
> + struct mtd_info *mtd = &nor->mtd;
> +
> +#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
> + /* prefer "small sector" erase if possible */
> + if (info->flags & SECT_4K) {
> + nor->erase_opcode = SPINOR_OP_BE_4K;
> + mtd->erasesize = 4096;
> + } else if (info->flags & SECT_4K_PMC) {
> + nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
> + mtd->erasesize = 4096;
> + } else
> +#endif
> + {
> + nor->erase_opcode = SPINOR_OP_SE;
> + mtd->erasesize = info->sector_size;
> + }
> + return 0;
> +}
> +
> +static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
> + const struct spi_nor_flash_parameter *params,
> + const struct spi_nor_hwcaps *hwcaps)
> +{
> + u32 ignored_mask, shared_mask;
> + bool enable_quad_io;
> + int err;
> +
> + /*
> + * Keep only the hardware capabilities supported by both the SPI
> + * controller and the SPI flash memory.
> + */
> + shared_mask = hwcaps->mask & params->hwcaps.mask;
> +
> + /* SPI protocol classes N-N-N are not supported yet. */
> + ignored_mask = (SNOR_HWCAPS_READ_2_2_2 |
> + SNOR_HWCAPS_READ_4_4_4 |
> + SNOR_HWCAPS_READ_8_8_8 |
> + SNOR_HWCAPS_PP_4_4_4 |
> + SNOR_HWCAPS_PP_8_8_8);
> + if (shared_mask & ignored_mask) {
> + dev_dbg(nor->dev,
> + "SPI protocol classes N-N-N are not supported yet.\n");
> + shared_mask &= ~ignored_mask;
> + }
> +
> + /* Select the (Fast) Read command. */
> + err = spi_nor_select_read(nor, params, shared_mask);
> + if (err) {
> + dev_err(nor->dev, "invalid (fast) read\n");
> + return err;
> + }
> +
> + /* Select the Page Program command. */
> + err = spi_nor_select_pp(nor, params, shared_mask);
> + if (err) {
> + dev_err(nor->dev, "invalid page program\n");
> + return err;
> + }
> +
> + /* Select the Sector Erase command. */
> + err = spi_nor_select_erase(nor, info);
> + if (err) {
> + dev_err(nor->dev, "invalid sector/block erase\n");
> + return err;
> + }
> +
> + /* Enable Quad I/O if needed. */
> + enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
> + spi_nor_get_protocol_width(nor->write_proto) == 4);
> + if (enable_quad_io && params->quad_enable)
> + nor->flash_quad_enable = params->quad_enable;
> + else
> + nor->flash_quad_enable = NULL;
> +
> + return 0;
> +}
> +
> +int spi_nor_scan(struct spi_nor *nor, const char *name,
> + const struct spi_nor_hwcaps *hwcaps)
> +{
> + struct spi_nor_flash_parameter params;
> const struct flash_info *info = NULL;
> struct device *dev = nor->dev;
> struct mtd_info *mtd = &nor->mtd;
> @@ -1548,6 +1824,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> if (ret)
> return ret;
>
> + /* Reset SPI protocol for all commands */
> + nor->reg_proto = SNOR_PROTO_1_1_1;
> + nor->read_proto = SNOR_PROTO_1_1_1;
> + nor->write_proto = SNOR_PROTO_1_1_1;
> +
> if (name)
> info = spi_nor_match_id(name);
> /* Try to auto-detect if chip name wasn't specified or not found */
> @@ -1580,6 +1861,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> }
> }
>
> + /* Parse the Serial Flash Discoverable Parameters table */
> + ret = spi_nor_init_params(nor, info, &params);
> + if (ret)
> + return ret;
> +
> mutex_init(&nor->lock);
>
> /*
> @@ -1610,7 +1896,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> mtd->type = MTD_NORFLASH;
> mtd->writesize = 1;
> mtd->flags = MTD_CAP_NORFLASH;
> - mtd->size = info->sector_size * info->n_sectors;
> + mtd->size = params.size;
> mtd->_erase = spi_nor_erase;
> mtd->_read = spi_nor_read;
>
> @@ -1641,76 +1927,47 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> if (info->flags & NO_CHIP_ERASE)
> nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
>
> -#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
> - /* prefer "small sector" erase if possible */
> - if (info->flags & SECT_4K) {
> - nor->erase_opcode = SPINOR_OP_BE_4K;
> - mtd->erasesize = 4096;
> - } else if (info->flags & SECT_4K_PMC) {
> - nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
> - mtd->erasesize = 4096;
> - } else
> -#endif
> - {
> - nor->erase_opcode = SPINOR_OP_SE;
> - mtd->erasesize = info->sector_size;
> - }
> -
> if (info->flags & SPI_NOR_NO_ERASE)
> mtd->flags |= MTD_NO_ERASE;
>
> mtd->dev.parent = dev;
> - nor->page_size = info->page_size;
> + nor->page_size = params.page_size;
> mtd->writebufsize = nor->page_size;
>
> if (np) {
> /* If we were instantiated by DT, use it */
> if (of_property_read_bool(np, "m25p,fast-read"))
> - nor->flash_read = SPI_NOR_FAST;
> + params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> else
> - nor->flash_read = SPI_NOR_NORMAL;
> + params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> } else {
> /* If we weren't instantiated by DT, default to fast-read */
> - nor->flash_read = SPI_NOR_FAST;
> + params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
> }
>
> /* Some devices cannot do fast-read, no matter what DT tells us */
> if (info->flags & SPI_NOR_NO_FR)
> - nor->flash_read = SPI_NOR_NORMAL;
> + params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
> +
> + /*
> + * Configure the SPI memory:
> + * - select op codes for (Fast) Read, Page Program and Sector Erase.
> + * - set the number of dummy cycles (mode cycles + wait states).
> + * - set the SPI protocols for register and memory accesses.
> + * - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
> + */
> + ret = spi_nor_setup(nor, info, &params, hwcaps);
> + if (ret)
> + return ret;
>
> - /* Quad/Dual-read mode takes precedence over fast/normal */
> - if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) {
> - ret = set_quad_mode(nor, info);
> + if (nor->flash_quad_enable) {
> + ret = nor->flash_quad_enable(nor);
> if (ret) {
> dev_err(dev, "quad mode not supported\n");
> return ret;
> }
> - nor->flash_read = SPI_NOR_QUAD;
> - } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) {
> - nor->flash_read = SPI_NOR_DUAL;
> }
>
> - /* Default commands */
> - switch (nor->flash_read) {
> - case SPI_NOR_QUAD:
> - nor->read_opcode = SPINOR_OP_READ_1_1_4;
> - break;
> - case SPI_NOR_DUAL:
> - nor->read_opcode = SPINOR_OP_READ_1_1_2;
> - break;
> - case SPI_NOR_FAST:
> - nor->read_opcode = SPINOR_OP_READ_FAST;
> - break;
> - case SPI_NOR_NORMAL:
> - nor->read_opcode = SPINOR_OP_READ;
> - break;
> - default:
> - dev_err(dev, "No Read opcode defined\n");
> - return -EINVAL;
> - }
> -
> - nor->program_opcode = SPINOR_OP_PP;
> -
> if (info->addr_width)
> nor->addr_width = info->addr_width;
> else if (mtd->size > 0x1000000) {
> @@ -1731,8 +1988,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
> return -EINVAL;
> }
>
> - nor->read_dummy = spi_nor_read_dummy_cycles(nor);
> -
> if (info->flags & SPI_S3AN) {
> ret = s3an_nor_scan(info, nor);
> if (ret)
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index f2a718030476..732ee6cd5330 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -73,6 +73,15 @@
> #define SPINOR_OP_BE_32K_4B 0x5c /* Erase 32KiB block */
> #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */
>
> +/* Double Transfer Rate opcodes - defined in JEDEC JESD216B. */
> +#define SPINOR_OP_READ_1_1_1_DTR 0x0d
> +#define SPINOR_OP_READ_1_2_2_DTR 0xbd
> +#define SPINOR_OP_READ_1_4_4_DTR 0xed
> +
> +#define SPINOR_OP_READ_1_1_1_DTR_4B 0x0e
> +#define SPINOR_OP_READ_1_2_2_DTR_4B 0xbe
> +#define SPINOR_OP_READ_1_4_4_DTR_4B 0xee
> +
> /* Used for SST flashes only. */
> #define SPINOR_OP_BP 0x02 /* Byte program */
> #define SPINOR_OP_WRDI 0x04 /* Write disable */
> @@ -119,13 +128,75 @@
> /* Configuration Register bits. */
> #define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
>
> -enum read_mode {
> - SPI_NOR_NORMAL = 0,
> - SPI_NOR_FAST,
> - SPI_NOR_DUAL,
> - SPI_NOR_QUAD,
> +
> +/* Supported SPI protocols */
> +#define SNOR_PROTO_WIDTH_MASK GENMASK(7, 0)
> +
> +#define SNOR_PROTO_CLASS_MASK GENMASK(9, 8)
> +#define SNOR_PROTO_CLASS_1_1_N (0x0u << 8)
> +#define SNOR_PROTO_CLASS_1_N_N (0x1u << 8)
> +#define SNOR_PROTO_CLASS_N_N_N (0x2u << 8)
> +
> +#define SNOR_PROTO_IS_DTR BIT(10) /* Double Transfer Rate */
> +
> +#define SNOR_PROTO_STR(_pclass, _pwidth) \
> + ((_pclass) | (_pwidth))
> +#define SNOR_PROTO_DTR(_pclass, _pwidth) \
> + (SNOR_PROTO_IS_DTR | (_pclass) | (_pwidth))
> +
> +enum spi_nor_protocol {
> + SNOR_PROTO_1_1_1 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_1_N, 1),
> + SNOR_PROTO_1_1_2 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_1_N, 2),
> + SNOR_PROTO_1_1_4 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_1_N, 4),
> + SNOR_PROTO_1_1_8 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_1_N, 8),
> + SNOR_PROTO_1_2_2 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_N_N, 2),
> + SNOR_PROTO_1_4_4 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_N_N, 4),
> + SNOR_PROTO_1_8_8 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_1_N_N, 8),
> + SNOR_PROTO_2_2_2 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_N_N_N, 2),
> + SNOR_PROTO_4_4_4 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_N_N_N, 4),
> + SNOR_PROTO_8_8_8 = SNOR_PROTO_STR(SNOR_PROTO_CLASS_N_N_N, 8),
> +
> + SNOR_PROTO_1_1_1_DTR = SNOR_PROTO_DTR(SNOR_PROTO_CLASS_1_1_N, 1),
> + SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(SNOR_PROTO_CLASS_1_N_N, 2),
> + SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(SNOR_PROTO_CLASS_1_N_N, 4),
> + SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(SNOR_PROTO_CLASS_1_N_N, 8),
> };
>
> +static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto)
> +{
> + return (proto & SNOR_PROTO_IS_DTR) == SNOR_PROTO_IS_DTR;
> +}
> +
> +static inline u32 spi_nor_get_protocol_class(enum spi_nor_protocol proto)
> +{
> + return proto & SNOR_PROTO_CLASS_MASK;
> +}
> +
> +static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
> +{
> + return proto & SNOR_PROTO_WIDTH_MASK;
> +}
> +
> +static inline u8 spi_nor_get_protocol_inst_width(enum spi_nor_protocol proto)
> +{
> + return (spi_nor_get_protocol_class(proto) == SNOR_PROTO_CLASS_N_N_N) ?
> + spi_nor_get_protocol_width(proto) :
> + 1u;
> +}
> +
> +static inline u8 spi_nor_get_protocol_addr_width(enum spi_nor_protocol proto)
> +{
> + return (spi_nor_get_protocol_class(proto) != SNOR_PROTO_CLASS_1_1_N) ?
> + spi_nor_get_protocol_width(proto) :
> + 1u;
> +}
> +
> +static inline u8 spi_nor_get_protocol_data_width(enum spi_nor_protocol proto)
> +{
> + return spi_nor_get_protocol_width(proto);
> +}
> +
> +
> #define SPI_NOR_MAX_CMD_SIZE 8
> enum spi_nor_ops {
> SPI_NOR_OPS_READ = 0,
> @@ -154,9 +225,11 @@ enum spi_nor_option_flags {
> * @read_opcode: the read opcode
> * @read_dummy: the dummy needed by the read operation
> * @program_opcode: the program opcode
> - * @flash_read: the mode of the read
> * @sst_write_second: used by the SST write operation
> * @flags: flag options for the current SPI-NOR (SNOR_F_*)
> + * @read_proto: the SPI protocol for read operations
> + * @write_proto: the SPI protocol for write operations
> + * @reg_proto the SPI protocol for read_reg/write_reg/erase operations
> * @cmd_buf: used by the write_reg
> * @prepare: [OPTIONAL] do some preparations for the
> * read/write/erase/lock/unlock operations
> @@ -173,6 +246,7 @@ enum spi_nor_option_flags {
> * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
> * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
> * completely locked
> + * @flash_quad_enable: [FLASH-SPECIFIC] set the Quad Enable bit of the SPI NOR
> * @priv: the private data
> */
> struct spi_nor {
> @@ -185,7 +259,9 @@ struct spi_nor {
> u8 read_opcode;
> u8 read_dummy;
> u8 program_opcode;
> - enum read_mode flash_read;
> + enum spi_nor_protocol read_proto;
> + enum spi_nor_protocol write_proto;
> + enum spi_nor_protocol reg_proto;
> bool sst_write_second;
> u32 flags;
> u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
> @@ -204,6 +280,7 @@ struct spi_nor {
> int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
> + int (*flash_quad_enable)(struct spi_nor *nor);
>
> void *priv;
> };
> @@ -219,11 +296,73 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
> return mtd_get_of_node(&nor->mtd);
> }
>
> +
> +/**
> + * struct spi_nor_hwcaps - Structure for describing the hardware capabilies
> + * supported by the SPI controller (bus master).
> + * @mask: the bitmask listing all the supported hw capabilies
> + */
> +struct spi_nor_hwcaps {
> + u32 mask;
> +};
> +
> +/*
> + *(Fast) Read capabilities.
> + * MUST be ordered by priority: the higher bit position, the higher priority.
> + * As a matter of performances, it is relevant to use Octo SPI protocols first,
> + * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
> + * (Slow) Read.
> + */
> +#define SNOR_HWCAPS_READ_MASK GENMASK(15, 0)
> +#define SNOR_HWCAPS_READ BIT(0)
> +#define SNOR_HWCAPS_READ_FAST BIT(1)
> +#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
> +
> +#define SNOR_HWCAPS_READ_DUAL GENMASK(7, 4)
> +#define SNOR_HWCAPS_READ_1_1_2 BIT(4)
> +#define SNOR_HWCAPS_READ_1_2_2 BIT(5)
> +#define SNOR_HWCAPS_READ_2_2_2 BIT(6)
> +#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(7)
> +
> +#define SNOR_HWCAPS_READ_QUAD GENMASK(11, 8)
> +#define SNOR_HWCAPS_READ_1_1_4 BIT(8)
> +#define SNOR_HWCAPS_READ_1_4_4 BIT(9)
> +#define SNOR_HWCAPS_READ_4_4_4 BIT(10)
> +#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(11)
> +
> +#define SNOR_HWCPAS_READ_OCTO GENMASK(15, 12)
> +#define SNOR_HWCAPS_READ_1_1_8 BIT(12)
> +#define SNOR_HWCAPS_READ_1_8_8 BIT(13)
> +#define SNOR_HWCAPS_READ_8_8_8 BIT(14)
> +#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(15)
> +
> +/*
> + * Page Program capabilities.
> + * MUST be ordered by priority: the higher bit position, the higher priority.
> + * Like (Fast) Read capabilities, Octo/Quad SPI protocols are preferred to the
> + * legacy SPI 1-1-1 protocol.
> + * Note that Dual Page Programs are not supported because there is no existing
> + * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
> + * implements such commands.
> + */
> +#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
> +#define SNOR_HWCAPS_PP BIT(16)
> +
> +#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
> +#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
> +#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
> +#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
> +
> +#define SNOR_HWCAPS_PP_OCTO GENMASK(22, 20)
> +#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
> +#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
> +#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
> +
> /**
> * spi_nor_scan() - scan the SPI NOR
> * @nor: the spi_nor structure
> * @name: the chip type name
> - * @mode: the read mode supported by the driver
> + * @hwcaps: the hardware capabilities supported by the controller driver
> *
> * The drivers can use this fuction to scan the SPI NOR.
> * In the scanning, it will try to get all the necessary information to
> @@ -233,6 +372,7 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
> *
> * Return: 0 for success, others for failure.
> */
> -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
> +int spi_nor_scan(struct spi_nor *nor, const char *name,
> + const struct spi_nor_hwcaps *hwcaps);
>
> #endif
>

\
 
 \ /
  Last update: 2017-03-23 18:40    [W:0.830 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site