lkml.org 
[lkml]   [2017]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] arm64: dts: rockchip: add dmac nodes for rk3368 SoCs
Date
Hi,

Am Mittwoch, 22. März 2017, 20:03:14 CET schrieb Huibin Hong:
> Add dmac bus and dmac peri dts nodes for peripherals,
> such as I2S, SPI, UART and so on.
>
> Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>

I applied that patch already in [0], did something change?


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=4b4c0db538fa6e3f31bc40ddc17c1d5facb49d36

> ---
> arch/arm64/boot/dts/rockchip/rk3368.dtsi | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a635adc..2a0422f 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
> @@ -189,6 +189,35 @@
> };
> };
>
> + amba {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + dmac_peri: dma-controller@ff250000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0xff250000 0x0 0x4000>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + clocks = <&cru ACLK_DMAC_PERI>;
> + clock-names = "apb_pclk";
> + arm,pl330-broken-no-flushp;
> + };
> +
> + dmac_bus: dma-controller@ff600000 {
> + compatible = "arm,pl330", "arm,primecell";
> + reg = <0x0 0xff600000 0x0 0x4000>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + clocks = <&cru ACLK_DMAC_BUS>;
> + clock-names = "apb_pclk";
> + arm,pl330-broken-no-flushp;
> + };
> + };
> +
> arm-pmu {
> compatible = "arm,armv8-pmuv3";
> interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,


\
 
 \ /
  Last update: 2017-03-22 14:31    [W:0.038 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site