lkml.org 
[lkml]   [2017]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] pinctrl: samsung: Calculate GPIO base for pinctrl_add_gpio_range
On Mon, Mar 20, 2017 at 08:39:15PM +0200, Krzysztof Kozlowski wrote:
> On Mon, Mar 06, 2017 at 04:49:09PM +0000, Charles Keepax wrote:
> > On Sat, Mar 04, 2017 at 08:20:11PM +0900, Tomasz Figa wrote:
> > > Hi Charles,
> > >
> > > 2017-03-01 2:04 GMT+09:00 Charles Keepax <ckeepax@opensource.wolfsonmicro.com>:
> > > > As the pinctrl is now added before the GPIOs are registered we need to
> > > > manually calculate what the GPIO base will be, otherwise the base for
> > > > each gpio_range will be set to zero. Fortunately the driver
> > > > already assigns a GPIO base, in samsung_gpiolib_register, and uses the
> > > > same calculation it does for the pin_base. Meaning the two will always
> > > > be the same and allowing us to reuse the pinbase and avoid the issue.
> > >
> > > Sorry, I didn't notice before and I don't see the offending patch in ,
> > > but you should add
> > >
> > > Fixes: XXXXXXXXXXXX ("pinctrl: Patch subject")
> > >
> > > if you intend to submit this patch separately. Otherwise, maybe this
> > > can be just squashed?
> > >
> >
> > Yeah apologies for that as the original patch hasn't showed up in
> > the tree yet I couldn't pull a commit ID to add the fixes tag.
> > Squashing it in is probably the best way to go.
>
> Hi Charles,
>
> Thanks for the work.
>
> This is a follow up of:
> https://patchwork.kernel.org/patch/9577147/
> Right?
>
> None of these two were applied so can you squash them, rebase, retest
> and send again?
>

Yeah no problem should be able to resend later today hopefully.

Thanks,
Charles

\
 
 \ /
  Last update: 2017-03-21 10:31    [W:2.105 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site