lkml.org 
[lkml]   [2017]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/7] coresight: bindings for CPU debug module
On Mon, Mar 20, 2017 at 07:49:53PM +0800, Leo Yan wrote:
> Hi Mathieu,
>
> On Fri, Mar 17, 2017 at 10:13:35AM -0600, Mathieu Poirier wrote:
>
> [...]
>
> > > +- compatible : should be
> > > + * "arm,coresight-cpu-debug"; supplemented with "arm,primecell"
> > > + since this driver is using the AMBA bus interface.
> >
> > This description needs to be refactored - see my comment from an earlier post
> > for more details.
>
> I have refined this description according to your suggestion:
> http://archive.armlinux.org.uk/lurker/message/20170301.154550.f55a09d5.en.html

My apologies here, I did not express myself properly. You got the wording right
but the format is a little bizarre. The line break after "should be" and the
sentence that starts with a '*' on the next line feel unatural. Simply

compatible : should be "arm,coresight-cpu-debug"; supplemented with
"arm,primecell" since this driver is using the AMBA bus interface.

will be fine.

>
> Am I missing anthing for this?
>
> > > +- reg : physical base address and length of the register set.
> > > +
> > > +- clocks : the clock associated to this component.
> > > +
> > > +- clock-names : the name of the clock referenced by the code. Since we are
> > > + using the AMBA framework, the name of the clock providing
> > > + the interconnect should be "apb_pclk" and the clock is
> > > + mandatory. The interface between the debug logic and the
> > > + processor core is clocked by the internal CPU clock, so it
> > > + is enabled with CPU clock by default.
> > > +
> > > +- cpu : the cpu phandle the debug module is affined to. When omitted
> > > + the module is considered to belong to CPU0.
> > > +
> > > +Optional properties:
> >
> > s/properties/property
> >
> > > +
> > > +- power-domains: a phandle to power domain node for debug module. We can
> > > + use "nohlt" to ensure CPU power domain is enabled.
> >
> > The "power-domains" property is to take care of the debug power domain. The
> > "nohlt" is to make sure registers in the CPU power domain are accessible - both
> > are independent from one another. As such the description for this binding
> > shoudl be:
> >
> > "a phandle to the debug power domain".
>
> Will fix for upper two comments.
>
> Thanks,
> Leo Yan

\
 
 \ /
  Last update: 2017-03-20 18:32    [W:0.077 / U:56.076 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site