lkml.org 
[lkml]   [2017]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] extcon: usb-gpio: Add level trigger support
Date
Now extcon-usb-gpio only supports for GPIO egdge trigger, but VBUS/ID
gpios' detection can be triggered by the level trigger on some platforms.
Thus intoduce one property 'extcon-gpio,level-trigger' to identify this
situation.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
.../devicetree/bindings/extcon/extcon-usb-gpio.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
index dfc14f7..191504b 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
@@ -9,6 +9,9 @@ Required properties:
Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
- id-gpio: gpio for USB ID pin. See gpio binding.
- vbus-gpio: gpio for USB VBUS pin.
+- extcon-gpio,level-trigger: Boolean, set this gpio's interrupt flag to
+level trigger. If not specified defaults to false, gpio's interrupt flag
+defaults to edge trigger.

Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
extcon_usb1 {
--
1.7.9.5
\
 
 \ /
  Last update: 2017-03-20 09:02    [W:0.071 / U:0.876 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site