lkml.org 
[lkml]   [2017]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 10/15] power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
Hi,

On Fri, Mar 17, 2017 at 10:55:22AM +0100, Hans de Goede wrote:
> Add support for monitoring an extcon device with SDP/CDP/DCP and HOST
> cables and adjust ilimit and enable/disable the 5v boost converter
> accordingly. This is necessary on systems where the PSEL pin is hardwired
> high and ILIM needs to be set by software based on the detected charger
> type.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-By: Sebastian Reichel <sre@kernel.org>

-- Sebastian

> ---
> drivers/power/supply/Kconfig | 1 +
> drivers/power/supply/bq24190_charger.c | 85 ++++++++++++++++++++++++++++++++++
> include/linux/power/bq24190_charger.h | 1 +
> 3 files changed, 87 insertions(+)
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index f8b6e64..fd93110 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -442,6 +442,7 @@ config CHARGER_BQ2415X
> config CHARGER_BQ24190
> tristate "TI BQ24190 battery charger driver"
> depends on I2C
> + depends on EXTCON
> depends on GPIOLIB || COMPILE_TEST
> help
> Say Y to enable support for the TI BQ24190 battery charger.
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index 82cb33d..03990e2 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -11,10 +11,12 @@
> #include <linux/module.h>
> #include <linux/interrupt.h>
> #include <linux/delay.h>
> +#include <linux/extcon.h>
> #include <linux/of_irq.h>
> #include <linux/of_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/power_supply.h>
> +#include <linux/workqueue.h>
> #include <linux/gpio.h>
> #include <linux/i2c.h>
>
> @@ -39,6 +41,8 @@
> #define BQ24190_REG_POC_WDT_RESET_SHIFT 6
> #define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4))
> #define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4
> +#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 1
> +#define BQ24190_REG_POC_CHG_CONFIG_OTG 2
> #define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
> #define BQ24190_REG_POC_SYS_MIN_SHIFT 1
> #define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0)
> @@ -152,6 +156,9 @@ struct bq24190_dev_info {
> struct power_supply *charger;
> struct power_supply *battery;
> struct bq24190_platform_data *pdata;
> + struct extcon_dev *extcon;
> + struct notifier_block extcon_nb;
> + struct work_struct extcon_work;
> char model_name[I2C_NAME_SIZE];
> kernel_ulong_t model;
> struct mutex f_reg_lock;
> @@ -167,6 +174,11 @@ struct bq24190_dev_info {
> * number at that index in the array is the real-world value that it
> * represents.
> */
> +
> +/* REG00[2:0] (IINLIM) in uAh */
> +static const int bq24190_iinlim_values[] = {
> + 100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000 };
> +
> /* REG02[7:2] (ICHG) in uAh */
> static const int bq24190_ccc_ichg_values[] = {
> 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000,
> @@ -1290,6 +1302,61 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> +static void bq24190_extcon_work(struct work_struct *work)
> +{
> + struct bq24190_dev_info *bdi =
> + container_of(work, struct bq24190_dev_info, extcon_work);
> + int ret, iinlim = 0;
> +
> + if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_SDP) == 1)
> + iinlim = 500000;
> + else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_CDP) == 1 ||
> + extcon_get_state(bdi->extcon, EXTCON_CHG_USB_ACA) == 1)
> + iinlim = 1500000;
> + else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_DCP) == 1)
> + iinlim = 2000000;
> +
> + if (iinlim) {
> + ret = bq24190_set_field_val(bdi, BQ24190_REG_ISC,
> + BQ24190_REG_ISC_IINLIM_MASK,
> + BQ24190_REG_ISC_IINLIM_SHIFT,
> + bq24190_iinlim_values,
> + ARRAY_SIZE(bq24190_iinlim_values),
> + iinlim);
> + if (ret)
> + dev_err(bdi->dev, "Can't set IINLIM: %d\n", ret);
> + }
> +
> + /*
> + * If no charger has been detected and host mode is requested, activate
> + * the 5V boost converter, otherwise deactivate it.
> + */
> + if (!iinlim && extcon_get_state(bdi->extcon, EXTCON_USB_HOST) == 1) {
> + ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
> + BQ24190_REG_POC_CHG_CONFIG_MASK,
> + BQ24190_REG_POC_CHG_CONFIG_SHIFT,
> + BQ24190_REG_POC_CHG_CONFIG_OTG);
> + } else {
> + ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
> + BQ24190_REG_POC_CHG_CONFIG_MASK,
> + BQ24190_REG_POC_CHG_CONFIG_SHIFT,
> + BQ24190_REG_POC_CHG_CONFIG_CHARGE);
> + }
> + if (ret)
> + dev_err(bdi->dev, "Can't set CHG_CONFIG: %d\n", ret);
> +}
> +
> +static int bq24190_extcon_event(struct notifier_block *nb, unsigned long event,
> + void *param)
> +{
> + struct bq24190_dev_info *bdi =
> + container_of(nb, struct bq24190_dev_info, extcon_nb);
> +
> + schedule_work(&bdi->extcon_work);
> +
> + return NOTIFY_OK;
> +}
> +
> static int bq24190_hw_init(struct bq24190_dev_info *bdi)
> {
> u8 v;
> @@ -1375,6 +1442,12 @@ static int bq24190_probe(struct i2c_client *client,
> return -EPROBE_DEFER;
> }
>
> + if (bdi->pdata && bdi->pdata->extcon_name) {
> + bdi->extcon = extcon_get_extcon_dev(bdi->pdata->extcon_name);
> + if (!bdi->extcon)
> + return -EPROBE_DEFER;
> + }
> +
> pm_runtime_enable(dev);
> pm_runtime_resume(dev);
>
> @@ -1423,6 +1496,18 @@ static int bq24190_probe(struct i2c_client *client,
> goto out4;
> }
>
> + if (bdi->extcon) {
> + INIT_WORK(&bdi->extcon_work, bq24190_extcon_work);
> + bdi->extcon_nb.notifier_call = bq24190_extcon_event;
> + ret = devm_extcon_register_notifier(dev, bdi->extcon, -1,
> + &bdi->extcon_nb);
> + if (ret)
> + goto out4;
> +
> + /* Sync initial cable state */
> + schedule_work(&bdi->extcon_work);
> + }
> +
> return 0;
>
> out4:
> diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h
> index 02d248b..909c5b9 100644
> --- a/include/linux/power/bq24190_charger.h
> +++ b/include/linux/power/bq24190_charger.h
> @@ -13,6 +13,7 @@
>
> struct bq24190_platform_data {
> bool no_register_reset;
> + const char *extcon_name;
> int (*get_ext_bat_property)(enum power_supply_property prop,
> union power_supply_propval *val);
> };
> --
> 2.9.3
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-03-20 05:53    [W:0.227 / U:5.412 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site