lkml.org 
[lkml]   [2017]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/2] fpga: Add support for Xilinx LogiCORE PR Decoupler
From
Date
On 17.3.2017 21:11, Moritz Fischer wrote:
> This adds support for the Xilinx LogiCORE PR Decoupler
> soft-ip that does decoupling of PR regions in the FPGA
> fabric during partial reconfiguration.
>
> Signed-off-by: Moritz Fischer <mdf@kernel.org>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com>
> Cc: linux-kernel@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
> Changes from v2:
> - Added Michal's Signed-off-by

btw: you forgot to add it above. :-)

> - Added "xlnx,pr-decoupler" unversioned fallback
>
> Changes from v1:
> - Added Michal as Co-Author since I pulled in some of his code
> - Reworked clk handling in _remove()
> - Pulled in Michal's version of show_enable(), ditched priv->enabled
>
> ---
> drivers/fpga/Kconfig | 9 +++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/xilinx-pr-decoupler.c | 148 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 158 insertions(+)
> create mode 100644 drivers/fpga/xilinx-pr-decoupler.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index ce861a2..ce0c91d 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -63,6 +63,15 @@ config ALTERA_FREEZE_BRIDGE
> isolate one region of the FPGA from the busses while that
> region is being reprogrammed.
>
> +config XILINX_PR_DECOUPLER
> + tristate "Xilinx LogiCORE PR Decoupler"
> + depends on FPGA_BRIDGE
> + help
> + Say Y to enable drivers for Xilinx LogiCORE PR Decoupler.
> + The PR Decoupler exists in the FPGA fabric to isolate one
> + region of the FPGA from the busses while that region is
> + being reprogrammed during partial reconfig.
> +
> endif # FPGA
>
> endmenu
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 8df07bc..ba94b79 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
> obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE) += altera-hps2fpga.o altera-fpga2sdram.o
> obj-$(CONFIG_ALTERA_FREEZE_BRIDGE) += altera-freeze-bridge.o
> +obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o
>
> # High Level Interfaces
> obj-$(CONFIG_FPGA_REGION) += fpga-region.o
> diff --git a/drivers/fpga/xilinx-pr-decoupler.c b/drivers/fpga/xilinx-pr-decoupler.c
> new file mode 100644
> index 0000000..dd37b1c
> --- /dev/null
> +++ b/drivers/fpga/xilinx-pr-decoupler.c
> @@ -0,0 +1,148 @@
> +/*
> + * Copyright (c) 2017, National Instruments Corp.
> + * Copyright (c) 2017, Xilix Inc
> + *
> + * FPGA Bridge Driver for the Xilinx LogiCORE Partial Reconfiguration
> + * Decoupler IP Core.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of_device.h>
> +#include <linux/module.h>
> +#include <linux/fpga/fpga-bridge.h>
> +
> +#define CTRL_CMD_DECOUPLE BIT(0)
> +#define CTRL_CMD_COUPLE ~BIT(0)

for others - this was reported by 0-day testing system as a warning.

M

\
 
 \ /
  Last update: 2017-03-20 13:37    [W:0.121 / U:1.200 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site