lkml.org 
[lkml]   [2017]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: Document the STM32 MDMA bindings
On Mon, Mar 13, 2017 at 04:06:38PM +0100, M'boumba Cedric Madianga wrote:
> This patch adds documentation of device tree bindings for the STM32 MDMA
> controller.
>
> Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
> Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
> ---
> .../devicetree/bindings/dma/stm32-mdma.txt | 94 ++++++++++++++++++++++
> 1 file changed, 94 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/stm32-mdma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
> new file mode 100644
> index 0000000..26a930c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
> @@ -0,0 +1,94 @@
> +* STMicroelectronics STM32 MDMA controller
> +
> +The STM32 MDMA is a general-purpose direct memory access controller capable of
> +supporting 64 independent DMA channels with 256 HW requests.
> +
> +Required properties:
> +- compatible: Should be "st,stm32-mdma"

Should be more specific.

> +- reg: Should contain MDMA registers location and length. This should include
> + all of the per-channel registers.
> +- interrupts: Should contain the MDMA interrupt.
> +- clocks: Should contain the input clock of the DMA instance.
> +- resets: Reference to a reset controller asserting the DMA controller.
> +- #dma-cells : Must be <5>. See DMA client paragraph for more details.
> +
> +Optional properties:
> +- dma-channels: Number of DMA channels supported by the controller.
> +- dma-requests: Number of DMA request signals supported by the controller.
> +- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via
> + AHB bus.

I don't understand what this is.

> +
> +Example:

Put the 2 examples together.

> +
> + mdma1: dma@52000000 {
> + compatible = "st,stm32-mdma";
> + reg = <0x52000000 0x1000>;
> + interrupts = <122>;
> + clocks = <&clk_dummy>;
> + resets = <&rcc 992>;
> + #dma-cells = <5>;
> + dma-channels = <16>;
> + dma-requests = <32>;
> + st,ahb-addr-masks = <0x20000000>, <0x00000000>;
> + };
> +
> +* DMA client
> +
> +DMA clients connected to the STM32 MDMA controller must use the format
> +described in the dma.txt file, using a six-cell specifier for each channel:
> +a phandle to the MDMA controller plus the following five integer cells:
> +
> +1. The request line number
> +2. The priority level
> + 0x00: Low
> + 0x01: Medium
> + 0x10: High
> + 0x11: Very high
> +3. A 32bit mask specifying the DMA channel configuration
> + -bit 0-1: Source increment mode
> + 0x00: Source address pointer is fixed
> + 0x10: Source address pointer is incremented after each data transfer
> + 0x11: Source address pointer is decremented after each data transfer
> + -bit 2-3: Destination increment mode
> + 0x00: Destination address pointer is fixed
> + 0x10: Destination address pointer is incremented after each data
> + transfer
> + 0x11: Destination address pointer is decremented after each data
> + transfer
> + -bit 8-9: Source increment offset size
> + 0x00: byte (8bit)
> + 0x01: half-word (16bit)
> + 0x10: word (32bit)
> + 0x11: double-word (64bit)
> + -bit 10-11: Destination increment offset size
> + 0x00: byte (8bit)
> + 0x01: half-word (16bit)
> + 0x10: word (32bit)
> + 0x11: double-word (64bit)
> +-bit 25-18: The number of bytes to be transferred in a single transfer
> + (min = 1 byte, max = 128 bytes)
> +-bit 29:28: Trigger Mode
> + 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
> + 0x01: Each MDMA request triggers a block transfer (max 64K bytes)
> + 0x10: Each MDMA request triggers a repeated block transfer
> + 0x11: Each MDMA request triggers a linked list transfer
> +4. A 32bit value specifying the register to be used to acknowledge the request
> + if no HW ack signal is used by the MDMA client
> +5. A 32bit mask specifying the value to be written to acknowledge the request
> + if no HW ack signal is used by the MDMA client
> +
> +Example:
> +
> + i2c4: i2c@5c002000 {
> + compatible = "st,stm32f7-i2c";
> + reg = <0x5c002000 0x400>;
> + interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>,
> + <GIC_SPI 96 IRQ_TYPE_NONE>;
> + clocks = <&clk_hsi>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
> + <&mdma1 37 0x0 0x40002 0x0 0x0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2017-03-20 22:59    [W:0.098 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site