lkml.org 
[lkml]   [2017]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Microphone gain on N900
Hi!

> >> v4.10 works quite nicely on N900, but I still have problems with
> >> audio. Even GSM calls would be usable, if I had reasonable volume on
> >> microphone and speaker... but I don't.
> >>
> >> Both speaker and microphone are too quiet. I can get louder output by
> >> plugging headset -- good. I can hear the other side nicely, but am
> >> too quiet for them. Unfortunately, even if I plug in wired headset,
> >> internal microphone is still used.
> >>
> For me these settings provide reasonable playback and capture volumes
> using v4.10.1:
>
> amixer -D hw:0 set PCM 100%
> amixer -D hw:0 set 'Line DAC' 80% on
> amixer -D hw:0 set 'Line' on
> amixer -D hw:0 set 'Left Line Mixer DACL1' on
> amixer -D hw:0 set 'Right Line Mixer DACR1' on
> amixer -D hw:0 set 'Jack Function' 'Headphone'
> amixer -D hw:0 set 'TPA6130A2 Headphone' 80%
>
> amixer -D hw:0 set 'Jack Function' 'Headset'
> amixer -D hw:0 set 'AGC' off
> amixer -D hw:0 set 'Input Select' 'ADC'
> amixer -D hw:0 set 'Left PGA Mixer Line1L' on
> amixer -D hw:0 set 'Left Line1L Mux' 'differential'
> amixer -D hw:0 set 'Right PGA Mixer Line1L' on
> amixer -D hw:0 set 'Right Line1L Mux' 'differential'
> amixer -D hw:0 set 'ADC HPF Cut-off' '0.0045xFs' 'disabled'
> amixer -D hw:0 set PGA 50% on
> amixer -D hw:0 cset iface=MIXER,name='PGA Capture Switch',index=0 on

This seems to correspond to volumes I have had before. They are enough
for phone call in quiet environment, but not really for normal usage.

Do you have settings where microphone on wired headset works?

Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-03-02 15:55    [W:0.591 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site