lkml.org 
[lkml]   [2017]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/7] rk808: Add RK805 support
Date
change in v4:
PATCH V4 1/7: NO change in V4
PATCH V4 2/7: rename the commit message
PATCH V4 3/7: NO change in V4
PATCH V4 4/7: Split this patch up into subsystems patch 5/7 6/7
PATCH V4 5/7: new added
PATCH V4 6/7: new added
PATCH V4 7/7: NO change in V4


change in V3:
PATCH V3 1/5: NO change in V3
PATCH V3 2/5: add rk805 RTC INT MASK define
PATCH V3 3/5: RK805 set suspend enable and disable is different from rk808
use rk805_regs_ops and rk805_switch_ops
PATCH V3 4/5: fix up the shutdown func
use pm_shutdown_prepare_fn to prepare shutdown
and pm_pwroff_fn pull down gpio to shut down rk805
it will update in the future(after rk808 support gpio func)
PATCH V3 5/5: NO change in V3

change in V2:
PATCH V2 1/5: NO change in V2
PATCH V2 2/5: add rk805 BUCK ILMAX define
PATCH V2 3/5: NO change in V2
PATCH V2 4/5: setting RK805 BUCK ILMAX in pre init
PATCH V2 5/5: Add RK805 device tree bindings document

Elaine Zhang (7):
mfd: rk808: fix up the chip id get failed
mfd: rk808: add rk805 regs addr and ID
regulator: rk808: Add regulator driver for RK805
mfd: rk808: Add RK805 support
clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808
mfd: dt-bindings: Add RK805 device tree bindings document

Documentation/devicetree/bindings/mfd/rk808.txt | 20 +++-
drivers/clk/Kconfig | 4 +-
drivers/mfd/Kconfig | 4 +-
drivers/mfd/rk808.c | 143 +++++++++++++++++++++++-
drivers/regulator/Kconfig | 4 +-
drivers/regulator/rk808-regulator.c | 130 +++++++++++++++++++++
drivers/rtc/Kconfig | 4 +-
include/linux/mfd/rk808.h | 120 ++++++++++++++++++++
8 files changed, 414 insertions(+), 15 deletions(-)

--
1.9.1


\
 
 \ /
  Last update: 2017-03-17 08:05    [W:0.087 / U:1.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site