lkml.org 
[lkml]   [2017]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 4/6] mtd: m25p80: implement read_xfer and write_xfer
Date
Implement read_xfer and write_xfer interfaces provided by SPI-NOR.
These will be used in upcoming OTP support in SPI-NOR to read/write
OTP area.

Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Cyrille Pitchen <cyrille.pitchen@atmel.com>
---
drivers/mtd/devices/m25p80.c | 79 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 8368249..a3ba907 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -186,6 +186,83 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
return ret;
}

+static ssize_t m25p80_read_xfer(struct spi_nor *nor,
+ struct spi_nor_xfer_cfg *cfg,
+ u8 *buf, size_t len)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ struct spi_transfer t[2] = {};
+ struct spi_message m;
+ unsigned int dummy = cfg->dummy_cycles;
+ ssize_t ret;
+
+ /* convert the dummy cycles to the number of bytes */
+ dummy /= 8;
+
+ spi_message_init(&m);
+
+ flash->command[0] = cfg->cmd;
+ m25p_addr2cmd(cfg->addr, cfg->addr_width, flash->command);
+
+ t[0].tx_buf = flash->command;
+ t[0].len = m25p_cmdsz(cfg->addr_width) + dummy;
+ spi_message_add_tail(&t[0], &m);
+
+ t[1].rx_buf = buf;
+ t[1].rx_nbits = m25p80_rx_nbits(cfg->mode);
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+
+ ret = spi_sync(spi, &m);
+ if (ret)
+ return ret;
+
+ ret = m.actual_length - m25p_cmdsz(cfg->addr_width) - dummy;
+ if (ret < 0)
+ return -EIO;
+ return ret;
+}
+
+static ssize_t m25p80_write_xfer(struct spi_nor *nor,
+ struct spi_nor_xfer_cfg *cfg,
+ u8 *buf, size_t len)
+{
+ struct m25p *flash = nor->priv;
+ struct spi_device *spi = flash->spi;
+ struct spi_transfer t[2] = {};
+ struct spi_message m;
+ unsigned int dummy = cfg->dummy_cycles;
+ ssize_t ret;
+
+ /* convert the dummy cycles to the number of bytes */
+ dummy /= 8;
+
+ spi_message_init(&m);
+
+ flash->command[0] = cfg->cmd;
+ m25p_addr2cmd(cfg->addr, cfg->addr_width, flash->command);
+
+ t[0].tx_buf = flash->command;
+ t[0].len = m25p_cmdsz(cfg->addr_width) + dummy;
+ spi_message_add_tail(&t[0], &m);
+
+ if (len) {
+ t[1].tx_buf = buf;
+ t[1].len = len;
+ spi_message_add_tail(&t[1], &m);
+ }
+
+ ret = spi_sync(spi, &m);
+ if (ret)
+ return ret;
+
+ ret = m.actual_length - m25p_cmdsz(cfg->addr_width) - dummy;
+ if (ret < 0)
+ return -EIO;
+ return ret;
+}
+
/*
* board specific setup should have ensured the SPI clock used here
* matches what the READ command supports, at least until this driver
@@ -213,6 +290,8 @@ static int m25p_probe(struct spi_device *spi)
nor->write = m25p80_write;
nor->write_reg = m25p80_write_reg;
nor->read_reg = m25p80_read_reg;
+ nor->read_xfer = m25p80_read_xfer;
+ nor->write_xfer = m25p80_write_xfer;

nor->dev = &spi->dev;
spi_nor_set_flash_node(nor, spi->dev.of_node);
--
2.6.2
\
 
 \ /
  Last update: 2017-03-17 13:47    [W:0.110 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site