lkml.org 
[lkml]   [2017]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] dt: bindings: fpga: add xilinx slave-serial binding description
From
Date
On 28.2.2017 17:40, Anatolij Gustschin wrote:
> Add dt binding documentation details for Xilinx FPGA configuration
> over slave serial interface.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Acked-by: Moritz Fischer <mdf@kernel.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> Changes in v4:
>
> - add Acked-by tags
>
> Changes in v3:
>
> - extend example to show the usage in SPI master node, connected
> to the fpga-region node
>
> Changes in v2:
>
> - correct gpios properties in example to match above description
>
> - use fpga-mgr@0 instead of fpga-spi@0 in example
>
> .../bindings/fpga/xilinx-slave-serial.txt | 44 ++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
>
> diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> new file mode 100644
> index 0000000..9766f74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
> @@ -0,0 +1,44 @@
> +Xilinx Slave Serial SPI FPGA Manager
> +
> +Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
> +what is referred to as "slave serial" interface.
> +The slave serial link is not technically SPI, and might require extra
> +circuits in order to play nicely with other SPI slaves on the same bus.
> +
> +See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
> +
> +Required properties:
> +- compatible: should contain "xlnx,fpga-slave-serial"
> +- reg: spi chip select of the FPGA
> +- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
> +- done-gpios: config status pin (referred to as DONE in the manual)
> +
> +Example for full FPGA configuration:
> +
> + fpga-region0 {
> + compatible = "fpga-region";
> + fpga-mgr = <&fpga_mgr_spi>;
> + #address-cells = <0x1>;
> + #size-cells = <0x1>;
> + };
> +
> + spi1: spi@10680 {
> + compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
> + pinctrl-0 = <&spi0_pins>;
> + pinctrl-names = "default";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cell-index = <1>;
> + interrupts = <92>;
> + clocks = <&coreclk 0>;
> + status = "okay";
> +
> + fpga_mgr_spi: fpga-mgr@0 {
> + compatible = "xlnx,fpga-slave-serial";
> + spi-max-frequency = <60000000>;
> + spi-cpha;
> + reg = <0>;
> + done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> + prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
> + };
> + };
>

Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2017-03-16 12:03    [W:0.081 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site