lkml.org 
[lkml]   [2017]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2 v3] dt-bindings: display: imx: entry for AUS mode
On Wed, Mar 08, 2017 at 07:22:56PM +0100, Martin Kaiser wrote:
> Allow setting the AUS mode for a display from the device tree.
> Use an optional boolean property. AUS mode can be set only on imx21
> and compatible chipsets.
>
> Signed-off-by: Martin Kaiser <martin@kaiser.cx>
> ---
> v3:
> use a boolean DT property instead of the register value
> separate patches for DT binding and code changes
>
> v2:
> re-sending DT bindings and code changes as one patch
>
> Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> index 7a5c0e2..cacae0e 100644
> --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
> @@ -13,6 +13,8 @@ Required nodes:
> Additional, the display node has to define properties:
> - bits-per-pixel: Bits per pixel
> - fsl,pcr: LCDC PCR value
> + A display node may optionally define
> + - fsl,aus_mode: boolean to enable AUS mode (only for imx21)

fsl,aus-mode

With that,

Acked-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2017-03-15 21:25    [W:0.068 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site