lkml.org 
[lkml]   [2017]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 00/11] perf: arm64: Support for Hisilicon SoC Hardware event counters
From
Date
Please have a look at this patch series. Looking forward for any 
feedback and comments.

Thanks,
Anurup

On Friday 10 March 2017 11:55 AM, Anurup M wrote:
> Provide Support for Hisilicon SoC(HiP05/06/07) Hardware event counters.
> The Hisilicon SoC HiP0x series has many uncore or non-CPU performance
> events and counters units.
>
> This v6 version is rebased to 4.11-rc1.
>
> This patch series is implemented refering to arm-cci, Intel/AMD uncore and
> also the cavium thunderX and xgene uncore pmu patches.
>
> Support for Hisilicon L3 cache(L3C) and Miscellaneous nodes(MN) hardware
> events and counters are added in this implementation.
>
> The uncore PMU units are registered as separate PMUs.
> e.g. in the case of L3 cache, which consist of 4 banks/instances, each bank
> is registered with perf as separate PMU, as each bank have separate control
> registers and interrupts. These units are also not CPU affine in the current
> chip versions.
>
> The Hisilicon uncore PMUs can be found under /sys/bus/event_source/devices.
> The counters are exported via sysfs in the corresponding events files
> under the PMU directory so the perf tool can list the event names.
>
> There is no counter overflow IRQ support in hardware for these uncore PMUs.
> So the driver use poll method using hrtimer to avoid overflow.
>
> ToDo:
> 1) ACPI probe and reset support.
>
> Version history
> ---------------
> v6
> --
> - Rebase to 4.11-rc1
> - Modify Copyright year to 2017.
>
> v5
> --
> - Use hrtimer to avoid overflow as MN counter overflow IRQ is broken
> in hardware.
> - Remove IRQ handling of MN in driver and update pmu dt-bindings.
> - Fix reveiw comments in v4 version.
>
> v4
> --
> - Counter overflow IRQ handling for MN PMU.
> - Use hrtimer to avoid counter overflow in L3 Cache PMU.
> - Use hisi-cpu- and hisi-io- for djtag compatible field.
> - Fix reveiw comments in v3 version.
>
> v3
> --
> - Fix review comments of v2 version.
> - Handle event groups. Do not allow group of mixed PMUs.
> - Use hip0x prefix for compatible names.
> - Fix all sparse and gcc W=1 warnings.
>
> v2
> --
> - Fix review comments of v1 version.
> - Move djtag driver to drivers/perf/hisilicon.
> - Have separate PMU instance for each L3 cache banks.
> - Modify device properties in DTS as per review comments.
> - Handle hardware version difference.
> - Change compatible names of djtag so use prefix hisi-
> and remove chip version as driver only depend on djtag
> hw version.
> - use devm_kzalloc.
> - Remove DDRC changes in this series. As the DDRC PMU doesnot
> depend on djtag it will be send separately.
>
> v1
> --
> -Initial version with support for L3C, MN and DDRC event counters
> -Djtag driver is used to access registers of L3 cache and MN.
>
> Anurup M (8):
> arm64: MAINTAINERS: hisi: Add hisilicon SoC PMU support
> dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU
> Documentation: perf: hisi: Documentation for HiP05/06/07 PMU event
> counting.
> drivers: perf: hisi: Update Kconfig for Hisilicon PMU support
> drivers: perf: hisi: Add support for Hisilicon SoC event counters
> drivers: perf: hisi: use poll method to avoid L3C counter overflow
> drivers: perf: hisi: use poll method when no IRQ for MN counter
> overflow
> dts: arm64: hip07: Add Hisilicon SoC PMU support
>
> Shaokun Zhang (1):
> drivers: perf: hisi: Miscellanous node(MN) event counting in perf
>
> Tan Xiaojun (2):
> dt-bindings: hisi: Add Hisilicon HiP05/06/07 Djtag dts bindings
> drivers: perf: hisi: Add support for Hisilicon Djtag driver
>
> .../devicetree/bindings/arm/hisilicon/djtag.txt | 76 ++
> .../devicetree/bindings/arm/hisilicon/pmu.txt | 87 +++
> Documentation/perf/hisi-pmu.txt | 76 ++
> MAINTAINERS | 9 +
> arch/arm64/boot/dts/hisilicon/hip07.dtsi | 79 +++
> drivers/perf/Kconfig | 8 +
> drivers/perf/Makefile | 1 +
> drivers/perf/hisilicon/Makefile | 1 +
> drivers/perf/hisilicon/djtag.c | 773 +++++++++++++++++++++
> drivers/perf/hisilicon/djtag.h | 42 ++
> drivers/perf/hisilicon/hisi_uncore_l3c.c | 653 +++++++++++++++++
> drivers/perf/hisilicon/hisi_uncore_mn.c | 528 ++++++++++++++
> drivers/perf/hisilicon/hisi_uncore_pmu.c | 445 ++++++++++++
> drivers/perf/hisilicon/hisi_uncore_pmu.h | 137 ++++
> 14 files changed, 2915 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
> create mode 100644 Documentation/perf/hisi-pmu.txt
> create mode 100644 drivers/perf/hisilicon/Makefile
> create mode 100644 drivers/perf/hisilicon/djtag.c
> create mode 100644 drivers/perf/hisilicon/djtag.h
> create mode 100644 drivers/perf/hisilicon/hisi_uncore_l3c.c
> create mode 100644 drivers/perf/hisilicon/hisi_uncore_mn.c
> create mode 100644 drivers/perf/hisilicon/hisi_uncore_pmu.c
> create mode 100644 drivers/perf/hisilicon/hisi_uncore_pmu.h
>

\
 
 \ /
  Last update: 2017-03-15 10:05    [W:0.076 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site